当前位置： 首页 > article >正文

Renesa Version Board和微信小程序通信

article 2024/11/18 20:41:17

目录

概述

1. 系统框架结构

1.1 功能介绍

1.2 系统框图

2 微信小程序开发

2.1 UI介绍

2.2  代码实现

3 功能实现

3.1 通信协议

3.2 系统测试

概述

本文主要介绍基于Renesa Version Board，采集多个传感器数据，并将这些数据通过蓝牙模块发送微信小程序上。笔者还介绍微信小程序App的源代码，并介绍app和下位机的通信协议。

1. 系统框架结构

1.1 功能介绍

Renesa Version Board实现功能：

1）读取Sensor数据

1）通过I2C和SH20温湿度传感器通信，读取该sensor上的温度和湿度值

2）通过I2C和ISL2003L光照传感器通信，读取该sensor上的lux值

3）通过IO接口读取SR04超声波测距数据

2）传输数据

Renesa Version Board通过UART接口将采集到的数据传送到STM32F103板卡，该板卡主要实现数据转发功能。

3）蓝牙模块数据传输

STM32F103板卡接收到Renesa Version Board传递的sensor数据后，对这些数据进行打包，然后将该数据包通过蓝牙接口发送出去。

4）微信小程序

微信小程序主要实现接收下位机蓝牙模块发送的数据，并对该数据包进行解析，然后通过UI将数据呈现出来。

1.2 系统框图

2 微信小程序开发

2.1 UI介绍

接收数据：

1） 显示温度和湿度数据

2） 显示光照数据

3） 显示SR04超声波测距数据

发送端数据：

通过4个按钮控制小车的行为 

2.2  代码实现

1）创建detail.wxml文件，实现UI框架

详细代码如下：

<view class="connect_box">
    <text class='connect_device_name'>{{deviceName}}</text>
    <text wx:if="{{connected}}" class="connect_state" catchtap="DisConnectTap">已连接</text>
    <text wx:else class="connect_state" catchtap="DisConnectTap" >未连接</text>
</view>

<view class="block-content">

    <view class="block-item column">
            <view class="item-row slider-box">
                <view class="item-title" >
                  <image class="item-title-icon" src="/images/light_s.png" />温度（℃）
                </view>
                <view class="input-unit"></view>

                <view class="item-title" style="position: relative;  left: 30rpx; ">
                  <image class="item-title-icon" src="/images/light_s.png" />湿度（%）
                </view>
                <view class="input-unit"></view>
            </view>
          
            <view class="item-row">
                <view class="input-value">
                    <input type="digit" value="{{temphtValue}}" disabled="false"/>
                </view>

                <view class="input-value" style="position: relative;  left: -90rpx; ">
                    <input type="digit" value="{{humidityValue}}" disabled="false"/>
                </view>

            </view>
    </view> 

    <view class="block-item column">
            <view class="item-row slider-box">
                <view class="item-title">
                  <image class="item-title-icon" src="/images/light_s.png" />光照（lux）
                </view>
                <view class="input-unit"></view>

                <view class="item-title" style="position: relative;  left: 60rpx; ">
                  <image class="item-title-icon" src="/images/light_s.png" />SR测距（cm）
                </view>
                <view class="input-unit"></view>

            </view>
          
            <view class="item-row">
                <view class="input-value" >
                    <input type="digit" value="{{luxValue}}" disabled="false"/>
                </view>

                <view class="input-value" style="position: relative;  left: -90rpx; ">
                    <input type="digit" value="{{srValue}}" disabled="false"/>
                </view>

            </view>
    </view> 


    <view class="block-item column" style="width: 750rpx; height: 507rpx; display: flex; box-sizing: border-box; left: 0rpx; top: 0rpx; position: relative">
      <button type="primary" bindtap="run_up" plain="true" style="position: relative; left: 3rpx; top: 5rpx; width: 183rpx; height: 357rpx; display: block; box-sizing: border-box">前进</button>
      <button type="primary" bindtap="run_up" plain="true" style="position: relative; left: 0rpx; top: 263rpx; width: 188rpx; height: 326rpx; display: block; box-sizing: border-box">后退</button>
      <button type="primary" bindtap="run_up" plain="true" style="position: relative; left: -247rpx; top: 3rpx; width: 183rpx; height: 361rpx; display: block; box-sizing: border-box">左转</button>
      <button type="primary" bindtap="run_up" plain="true" style="position: relative; left: 256rpx; top: -82rpx; width: 183rpx; height: 343rpx; display: block; box-sizing: border-box">右转</button>
      <button type="primary" bindtap="run_up" plain="true" style="position: relative; left: 5rpx; top: -173rpx; width: 179rpx; height: 361rpx; display: block; box-sizing: border-box">停止</button>
    </view> 
</view>

2）样式文件

详细代码如下：

.connect_box {
    width: 100%;
    height: 30px;
    line-height: 30px;
    font-size: 32rpx;
    color: #666;
    background-color: antiquewhite;
    font-family: "Microsoft YaHei";
}
.connect_device_name{
    float: left;
    padding-left: 10px;
    color: #39beff;
}

.connect_state {
    float: right;
    padding-right: 10px;
    text-decoration: underline;
    color: #39beff;
}

page {
    min-height: 100%;
  }
  
  .container {
    height: 100%;
    display: flex;
    flex-direction: column;
    align-items: center;
    justify-content: space-between;
    box-sizing: border-box;
    background-color: cadetblue;
  }
  
  .block {
    padding: 15px;
    width: 100%;
    box-sizing: border-box;
  }
  
  .block-title {
    font-size: 20px;
    margin-bottom: 30px;
  }
  
  .block-subtitle {
    margin: 15px 0;
    font-size: 14px;
    color: #666;
  }
  
  .block-item {
    position: relative;
    display: flex;
    justify-content: space-between;
    align-items: center;
    margin: 15px 0;
    padding: 15px;
    font-size: 18px;
    border-radius: 8px;
    background:azure;
    box-shadow: 0px 2px 8px rgba(0, 0, 0, 0.1);
  }
  
  .block-item:last-child {
    margin-bottom: 0;
  }
  .block-item.column {
    flex-direction: column;
  }
  
  .item-row {
    display: flex;
    justify-content: space-between;
    align-items: center;
    width: 100%;
  }
  
  .item-row + .item-row {
    margin-top: 10px;
  }
  
  .item-column {
    display: flex;
    flex-direction: column;
    justify-content: space-between;
    align-self: stretch;
    flex-grow: 1;
  }
  
  .item-title {
    font-size: 16px;
  }
  
  .item-title-icon {
    height: 1.2em;
    width: 1.2em;
    margin-right: 10px;
    vertical-align: middle;
  }
  
  .slider-box {
    flex-grow: 1;
  }
  
  .slider {
    margin-left: 10px;
    margin-right: 20px;
    flex-grow: 1;
  }
  
  .slider-value {
    display: flex;
    justify-content: space-around;
    align-items: center;
    margin: 15px auto;
    width: 70%;
  }
  
  .input-unit {
    text-align: right;
    font-size: 14px;
    color: #999;
  }
  
  .input-value {
    display: inline-block;
    padding: 0 16px;
    border: 1px solid #CCCCCC;
    border-radius: 4px;
    max-width: 3.5em;
    font-size: 16px;
    text-align: center;
  }

3） JS文件

详细代码如下：

const utils = require('utils.js')
const ble = require('bluetooth.js')
Page({
    /**
     * 页面的初始数据
     */
    data: {
        pageload: false,
        connected: false,
        send_hex: false,
        send_string: true,
        send_string_val: 'Hex',
        recv_string: true,
        recv_string_val: 'Hex',
        recv_value: '',
        send_number: 0,
        recv_number: 0,
        recv_hex: true,
        try_cnt:0,
        rece_string:'',
        deviceArray: []
    },


    /**
     * 生命周期函数--监听页面加载
     */
    onLoad: function (options) {
        var that = this; 

        console.log(options);
        this.setData({
            pageload:true,
            connected: false,
            deviceId: options.id,
            try_cnt:0,
            deviceName: options.name
        });

        console.log("detail:  onLoad");
        wx.stopBluetoothDevicesDiscovery({
            success: function (res) {
                console.log('停止搜索设备', res)
            }
        })

        that.closeBLEConnection(that.data.deviceId);
        that.createBLEConnection(that.data.deviceId, that.data.deviceName); 
    }, 

    onHide () {
        var that = this;
        // Do something when hide.
        // 断开连接
        console.log("detail:  onHide");
    },

    onShow:function()
    {      
        // var that = this; 
        // connect bluetooth
        // that.closeBLEConnection(that.data.deviceId);
        // that.createBLEConnection(that.data.deviceId, that.data.deviceName); 
    },

    onUnload() {
        var that = this;

        this.setData({
            pageload:true,
            connected: false,
            try_cnt:0,
        });

        console.log("page:  onUnload  ");
        that.offBLEMonitor();
        that.closeBLEConnection(that.data.deviceId);
        that.closeBluetoothAdapter();

        wx.showToast({
            title: '断开蓝牙',
            icon: 'success',
            duration: 2000
          })  
    },


    DisConnectTap:function()
    {
        var that = this;

        that.setData({
            pageload:true,
            connected: false,
            try_cnt:0,
        });

        ble.openBluetoothAdapter(that.data.deviceId, that.data.deviceName);
        that.createBLEConnection(that.data.deviceId, that.data.deviceName); 
    },



    RecvCleanTap: function () {
        this.setData({
            recv_value: '',
            recv_number: 0
        });
    },  

    /**
     * 创建连接
     * @param {*} deviceId 
     * @param {*} name 
     */
    createBLEConnection(deviceId, name) 
    {
        wx.createBLEConnection({
            deviceId,  
            success: (res) => {
                console.log('createBLEConnection - success： ', res)
                this.getBLEDeviceServices(deviceId)              
            },
            fail: (res) => {
                console.error('createBLEConnection - fail: ', res)
                if(res.errCode == 10006 ){
                    this.createBLEConnection(deviceId, name)
                }
                else{
                    ble.openBluetoothAdapter(deviceId, name)
                    this.createBLEConnection(deviceId, name)
                }

                this.setData({
                    connected: false,
                })               
            } 
        })
    },
        
    getBLEDeviceServices(deviceId) 
    {
        var that = this;
        wx.getBLEDeviceServices({
            deviceId,
            success: (res) => 
            {
                console.log('getBLEDeviceServices - success： ', res)
                for (let i = 0; i < res.services.length; i++) 
                {
                    var ergodic_UUID =res.services[i].uuid;      //取出服务里面的UUID
                    var UUID_slice = ergodic_UUID.slice(4, 8);   //截取4到8位

                    console.log('getBLEDeviceServices, service ID =  ', res.services[i].uuid);
                    if ( res.services[i].isPrimary && (UUID_slice == "FFE0") ) 
                    {
                        that.setData({
                            serviceId: res.services[i].uuid,
                        });
                        break;
                    }
                }

                wx.getConnectedBluetoothDevices({
                    services: res.services,
                    success: (res) => 
                    {                         
                      console.log("getConnectedBluetoothDevices - success:  " +  res)
                    },
                    fail: (res) => {
                        console.error('getConnectedBluetoothDevices - fail: ', res)
                        ble.openBluetoothAdapter(deviceId, that.data.deviceName)
                    }                    
                })

                that.getBLEDeviceCharacteristics(deviceId, that.data.serviceId);
            },
            fail: (res) => {
                console.error('getBLEDeviceServices - fail: ', res)
                // try it again
                ble.openBluetoothAdapter(deviceId, that.data.deviceName)
                that.monitor_connected();
            } 
        });
    },

   getBLEDeviceCharacteristics(deviceId, serviceId) 
   {
        var that = this;
        let falg = false;

        wx.getBLEDeviceCharacteristics({
            deviceId,
            serviceId,
            success: (res) => 
            {
                that.setData({
                    connected: true,
                })                
                console.log('getBLEDeviceCharacteristics success', res.characteristics)
                for (let i = 0; i < res.characteristics.length; i++) 
                {
                    let item = res.characteristics[i]
                     
                    console.log('getBLEDeviceCharacteristics, Characteristics ID =  ', item.uuid)
                    // 该特征值：可读
                    if (item.properties.read) 
                    {
                        wx.readBLECharacteristicValue({
                            deviceId,
                            serviceId,
                            characteristicId: item.uuid,
                        })
                    }

                    // 该特征值：可写
                    if (item.properties.write) 
                    {
                        this.setData({
                            canWrite: true
                        })
                        this._deviceId = deviceId
                        this._serviceId = serviceId
                        this._characteristicId = item.uuid
                        this.writeValue()
                    }

                    if (item.properties.notify || item.properties.indicate) 
                    {
                        that.setData({
                            characteristicId: item.uuid
                        });
                        falg = true;
                        break;
                    }
                }

                
                if( falg )
                {
                    console.debug('getBLEDeviceCharacteristics - deviceId : ', deviceId)
                    console.debug('getBLEDeviceCharacteristics - serviceId : ', serviceId)
                    console.debug('getBLEDeviceCharacteristics - characteristicId: ', that.data.characteristicId)

                    // read device character value 
                    that.readBLECharacteristicValue(deviceId, serviceId, that.data.characteristicId)   
                    that.notifyBLECharacteristicValueChange(deviceId, serviceId, that.data.characteristicId) 
                }
            },
            fail: (res) => {
                console.error('getBLEDeviceCharacteristics -- fail: ', res)
                this.setData({
                    connected: false,
                })

                if (res.errCode === 10006)
                {
                    that.offBLEMonitor();
                    that.createBLEConnection(deviceId, that.data.deviceName); 
                }
            }
        })

   },

   readBLECharacteristicValue(deviceId,serviceId, characteristicId )
   {
        wx.readBLECharacteristicValue({
                // 这里的 deviceId 需要已经通过 createBLEConnection 与对应设备建立链接
                deviceId,
                // 这里的 serviceId 需要在 getBLEDeviceServices 接口中获取
                serviceId,
                // 这里的 characteristicId 需要在 getBLEDeviceCharacteristics 接口中获取
                characteristicId,
                success (res) {
                    console.log('readBLECharacteristicValue:', res.errCode)
                }
         })
   },

   notifyBLECharacteristicValueChange(deviceId,serviceId, characteristicId )
   {
        var that = this;

        wx.notifyBLECharacteristicValueChange({
            state: true,    // enable notify
            deviceId,
            serviceId,
            characteristicId,

            success: (res) => {
                console.info('notifyBLECharacteristicValueChange success: ', res.errMsg)

                // read data here 
                // 操作之前先监听，保证第一时间获取数据
                wx.onBLECharacteristicValueChange(function(res) 
                {
                    that.data.connected = true; 
                    console.info('onBLECharacteristicValueChange', res);
                    console.info(`characteristic ${res.characteristicId} has changed, now is ${res.value}`);

                    var result = res.value;
                    var hex = utils.buf2hex(result);
                    var _hex_ss =  utils.hex2string(hex);

                    console.info("hex: " + hex);
                    console.info("string: " + _hex_ss);
                    that.data.rece_string += _hex_ss;

                    var recv_number_1 = that.data.recv_number + _hex_ss.length / 2;
                    var recv_number = Math.round(recv_number_1);

                    if( that.data.rece_string.includes("log:") && that.data.rece_string.includes(":end")){
                        that.setData({
                            recv_number: recv_number,
                            recv_value: that.data.recv_value + that.data.rece_string,
                        });

                        console.info("string: " + that.data.rece_string);
                        let buff =  that.data.rece_string.split(':')
                        console.log(buff)
                        that.data.rece_string = ''

                        let valueList = buff[1].split(',')
                        that.data.recv_value = "";
                        that.data.recv_number = 0;
                        console.log(valueList)
                        if(valueList.length == 4 ){
                        that.setData({
                            temphtValue: valueList[0],
                            humidityValue: valueList[1],
                            luxValue: valueList[2],
                            srValue: valueList[3],
                        });
                        } 
                    }     
                    that.monitor_connected();
                })                                 
            },

            fail: (res) => {
                console.error('notifyBLECharacteristicValueChange fail: ', res)
                that.monitor_connected();
            }
        })    
   },

   monitor_connected_action()
   {
        var that = this;


        let deviceId = that.data.deviceId;

        wx.onBLEConnectionStateChange(function(res) {
            // 该方法回调中可以用于处理连接意外断开等异常情况
            console.log( "onBLEConnectionStateChange ----- " +  `device ${res.deviceId} state has changed, connected: ${res.connected}`)
            if( res.deviceId == deviceId && res.connected == false )
            {    
                wx.closeBLEConnection({
                    deviceId,
                    success: (res) => {
                        console.debug('detail: closeBLEConnection success', res);  
                        that.offBLEMonitor();
                        that.createBLEConnection(deviceId, that.data.deviceName); 
                    },
                    fail: (res) => {                     
                        console.error('detail: closeBLEConnection fail', res);  
                        if (res.errCode === 10006) {
                            that.offBLEMonitor();
                            that.createBLEConnection(deviceId, that.data.deviceName); 
                        }
                    }
                })

                that.setData({
                    try_cnt: that.data.try_cnt + 1,
                })
            }
            else{
                that.data.try_cnt  = 0;
            }
        })   
   },

   monitor_connected()
   {
        var that = this;

        setTimeout(that.monitor_connected_action, 200);
   },

    writeValue( val ) 
    {
        // 向蓝牙设备发送一个0x00的16进制数据
        let buffer = new ArrayBuffer(1);
        let dataView = new DataView(buffer);

        dataView.setUint8(0, val);

        console.debug('getBLEDeviceCharacteristics - deviceId : ', this._deviceId)
        console.debug('getBLEDeviceCharacteristics - serviceId : ', this._serviceId)
        console.debug('getBLEDeviceCharacteristics - characteristicId: ', this._characteristicId)

        wx.writeBLECharacteristicValue({
            deviceId: this._deviceId,
            serviceId: this._serviceId,
            characteristicId: this._characteristicId,
            value: buffer,
            success: (res) => {
                console.debug('writeBLECharacteristicValue success', res);  
            },
            fail: (res) => {
                console.error(' writeBLECharacteristicValue fail', res);  
                this.setData({
                    connected: false,
                }) 
            }
        })
    },

    closeBluetoothAdapter() 
    {
        wx.closeBluetoothAdapter({           
            success (res) {
              console.log(res)
            }        
        })

        this.setData({
            connected: false,
        }),         
        this._discoveryStarted = false
    },

    closeBLEConnection( deviceId ) 
    {
        wx.closeBLEConnection({
            deviceId,
            success: (res) => {
                console.debug('detail: closeBLEConnection success', res);  
            },
            fail: (res) => {
                console.error('detail: closeBLEConnection fail', res);  
            }
        })

        this.setData({
            connected: false,
            canWrite: false,
        })
    },

    run_up:function()
    {
        var that = this;

        var val = 0x18 ;      
        that.writeValue( val );   
    }, 
    
    run_down:function()
    {
        var that = this;

        var val = 0x52;      
        that.writeValue( val );   
    },

    run_left:function()
    {
        var that = this;

        var val = 0x08;      
        that.writeValue( val );   

    },

    run_right:function()
    {
        var that = this;

        var val = 0x5a;      
        that.writeValue( val );   
    },

    whiteLightValueSliderChange:function(e)
    {
        var that = this;
        // 向蓝牙设备发送一个0x00的16进制数据
        var val = Math.random() * 255 | 0;      
        that.writeValue( val );   
    },

    offBLEMonitor(){
        this.setData({
            connected: false,
        }), 
        wx.offBLEPeripheralConnectionStateChanged();
        wx.offBLEConnectionStateChange();
        wx.offBLECharacteristicValueChange();
        wx.offBLEMTUChange();
    }
})

3 功能实现

3.1 通信协议

发送数据协议如下：

log: %d,%d,...,%d:end

Demo log如下：

log:25.07,60.69,1312,172.76:end

微信小程序log 调试信息

微信小程序端解析数据方法：

代码第313行： 判断数据包的头（log:）和尾部（：end）

代码第320行：解析字符串

3.2 系统测试 

 调试log信息，解析到下位机上传的数据

App上数据显示信息

 

 系统硬件框图：


http://www.kler.cn/a/282214.html

相关文章：

  • Centos 7 安装wget
  • PySpark——Python与大数据
  • 【设计模式】行为型模式（五）：解释器模式、访问者模式、依赖注入
  • Controller Baseband commands速览
  • Rewar Model的输出（不包含训练）
  • 【H3C华三 】VRRP与BFD、Track联动配置案例
  • sqli-labsSQL手工注入第26-30关
  • scrapy--图片管道-ImagesPipeline
  • 第十五章、 Io流
  • 风控领域特征工程
  • 力扣: 移除链表元素
  • 2017年系统架构师案例分析试题一
  • 使用C++，仿照string类，实现myString
  • 符合开闭原则的设计模式
  • 如何使用 Qt C++ 基于 FFmpeg 开发本地视频播放器
  • Kafka·Producer
  • 通过历史进行数据预测的算法
  • 云计算实训39——部署Harbor、部署Docker-compose、YAML文件
  • Win11 操作（七）声音降噪
  • 【JVM】亿级流量调优(一)
  • Git Submodule 常用命令详解
  • 前端实现截图（Vue）
  • uniapp + Vue3自定义封装弹窗组件
  • Kubectl常用命令
  • 深度强化学习算法（三）（附带MATLAB程序）
  • Python酷库之旅-第三方库Pandas(105)