【K8s】【部署】集群部署

1 主机/服务规划

2 主机初始化

参考https://blog.csdn.net/lilinxi001/article/details/140184722

2.1 配置主机名

hostnamectl set-hostname [主机名]

2.2 配置/etc/hosts

vi /etc/hosts
#添加
192.168.199.20 k8s.master.vip vip
192.168.199.21 k8s01
192.168.199.22 k8s02
192.168.199.23 k8s03
192.168.199.24 k8s04
192.168.199.25 k8s05

2.3 配置桥接的IPv4传递到iptables

cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

sysctl --system  #执行生效

2.4 部署时间同步服务

yum install ntpdate -y
ntpdate time.windows.com

3 在两台Master节点部署keeplived，即k8s01、k8s02

3.1 keepalived安装

yum -y install conntrack-tools 
yum -y install libseccomp
yum -y install libtool-ltdl
yum -y install keepalived

3.2 k8s01配置

vi keepalived.conf
#替换
! Configuration File for keepalived

global_defs {
   router_id k8s
}


vrrp_script check_haproxy {
    script "killall -0 haproxy"
    interval 3
    weight -2
    fall 10
    rise 2
}

vrrp_instance VI_1 {
    state MASTER
    interface ens33   #根据实际网卡名配置
    virtual_router_id 51
    priority 250
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.199.20
    }
    track_script {
        check_haproxy
    }
}

3.3 k8s01配置

vi keepalived.conf
#替换
! Configuration File for keepalived

global_defs {
   router_id k8s
}


vrrp_script check_haproxy {
    script "killall -0 haproxy"
    interval 3
    weight -2
    fall 10
    rise 2
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    virtual_router_id 51
    priority 250
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.199.20
    }
    track_script {
        check_haproxy
    }
}

4 在两台Master节点部署HAProxy，即k8s01、k8s02

yum install -y haproxy

4.1 haproxy配置

vi /etc/haproxy/haproxy.cfg
#替换
#---------------------------------------------------------------------
# Example configuration for a possible web application.  See the
# full configuration options online.
#
#   http://haproxy.1wt.eu/download/1.4/doc/configuration.txt
#
#---------------------------------------------------------------------

#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
    # to have these messages end up in /var/log/haproxy.log you will
    # need to:
    #
    # 1) configure syslog to accept network log events.  This is done
    #    by adding the '-r' option to the SYSLOGD_OPTIONS in
    #    /etc/sysconfig/syslog
    #
    # 2) configure local2 events to go to the /var/log/haproxy.log
    #   file. A line like the following can be added to
    #   /etc/sysconfig/syslog
    #
    #    local2.*                       /var/log/haproxy.log
    #
    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
    mode                    http
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

#---------------------------------------------------------------------
# kubernetes apiserver frontend which proxys to the backends
#---------------------------------------------------------------------
frontend  kubernetes-apiserver
    mode                 tcp
    bind                 *:16443
    option               tcplog
    default_backend      kubernetes-apiserver

#---------------------------------------------------------------------
# static backend for serving up images, stylesheets and such
#---------------------------------------------------------------------
backend kubernetes-apiserver
    mode        tcp
    balance     roundrobin
    server k8s01 192.168.199.21:6443  check
    server k8s02 192.168.199.22:6443  check

listen stats
    bind          *:1080
    stats auth    admin:awesomePassword
    stats refresh 5s
    stats realm   HAProxy\ Statistics
    stats uri     /admin?stats

5 部署Docker、kubeadm、kubelet

5.1 安装Docker

yum -y install wget

wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
#此处docker版本可以根据个人情况修改
yum install -y docker-ce-19.03.0 docker-ce-cli-19.03.0
systemctl enable docker && systemctl start docker
#修改仓库地址

vi /etc/docker/daemon.json 
#替换
{
"exec-opts": ["native.cgroupdriver=systemd"],
"registry-mirrors": ["https://5w5kf152.mirror.aliyuncs.com"]
}

5.2 kubeadm，kubelet 和 kubectl

vi /etc/yum.repos.d/kubernetes.repo
#添加
[Kubernetes]
name=kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

 yum install -y kubelet-1.18.0 kubeadm-1.18.0 kubectl-1.18.0

systemctl enable kubelet

5.3 部署kubernetes Master 即k8s01执行

kubeadm in it \
--apiserver-advertise-address=192.168.199.21 \
--image-repository registry.aliyuncs.com/google_containers \
--kubernetes-version v1.17.0 \
--service-cidr=10.96.0.0/12 \
--pod-network-cidr=10.244.0.0/16