当前位置： 首页 > article >正文

在全志V851S开发板上使用SSH配置步骤分析

article 2024/11/18 1:27:01 
在Tina板子上面开启SSH SERVER

在Tina配置界面的以下目录中

> Network > SSH

勾选的项目

《》openssh-keygen… OpenSSH keygen
<> openssh-server… OpenSSH server

1.配置 sshd_config

rm -rf /etc/ssh/sshd_config;touch /etc/ssh/sshd_config;vi /etc/ssh/sshd_config;

sshd_config 配置文件

Port 22

# Logging
SyslogFacility AUTH
LogLevel INFO


HostKey /etc/ssh/ssh_host_rsa_key

HostKey /etc/ssh/ssh_host_ed25519_key

# Authentication:
LoginGraceTime 2m
PermitRootLogin yes
PermitEmptyPasswords yes
StrictModes yes
MaxAuthTries 6
MaxSessions 10
AuthorizedKeysFile      .ssh/authorized_keys

TCPKeepAlive yes

Subsystem       sftp    /usr/lib/sftp-server

2.启动SSH SERVER

etc/init.d/sshd start

3.处理报错
报错Privilege separation user sshd does not exist
执行：

vi /etc/passwd

添加一行代码

sshd:x:109:65534::/var/run/sshd:/usr/sbin/nologin

3.报错procd_add_mdns

执行：

vi /etc/init.d/sshd

注释掉 #procd_add_mdns “ssh” “tcp” “$lport”

4.启动SSH SERVER

etc/init.d/sshd start

  • TIP:
    启动SSH 之前最好先连上wifi
    建议用MobaXterm 可以做到SSH 和 文件传输，两个功能同时使用。

  • 注意：
    SSH 登录账户 root
    SSH 登录密码 tina

上述操作如何在编译前配置好OPENSSH

修改4个地方：

1，设置开机启动wifi
启动 wifi, opensshserver

nano /root/tina-v853-docker/openwrt/target/v851s/v851s-lizard/busybox-init-base-files/etc/init.d/S50wifideamon

修改 S50wifideamon作为开机启动项配置文件：

#!/bin/sh
#
# Start wifi_daemon....
#

start() {
        wifi_daemon
        sleep 2
        wifi -o sta
        sleep 2
        wifi -c d1
//sleeep for 4seconds
        sleep 4
        ifconfig wlan0 192.168.0.105
        /etc/init.d/sshd start
}

stop() {
        printf "Stopping wifi_daemon: "
}

case "$1" in
    start)
        start
        ;;
    stop)
        stop
        ;;
    restart|reload)
        stop
        start
        ;;
  *)
        echo "Usage: $0 {start|stop|restart}"
        exit 1
esac

exit $?

2，通过Makefile配置sshd_config

nano /root/tina-v853-docker/openwrt/package/feeds/net/openssh/Makefile

完整文件代码

#
# Copyright (C) 2006-2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

include $(TOPDIR)/rules.mk

PKG_NAME:=openssh
PKG_VERSION:=8.4p1
PKG_RELEASE:=4

PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/ \
  https://ftp.spline.de/pub/OpenBSD/OpenSSH/portable/
PKG_HASH:=5a01d22e407eb1c05ba8a8f7c654d388a13e9f226e4ed33bd38748dafa1d2b24

PKG_LICENSE:=BSD ISC
PKG_LICENSE_FILES:=LICENCE
PKG_CPE_ID:=cpe:/a:openssh:openssh

PKG_REMOVE_FILES:=
PKG_CONFIG_DEPENDS := \
 CONFIG_OPENSSH_LIBFIDO2

PKG_BUILD_DEPENDS += OPENSSH_LIBFIDO2:libfido2

include $(INCLUDE_DIR)/package.mk

define Package/openssh/Default
 SECTION:=net
 CATEGORY:=Network
 DEPENDS:=+libopenssl +zlib
 TITLE:=OpenSSH
 MAINTAINER:=Peter Wagner <tripolar@gmx.at>
 URL:=http://www.openssh.com/
 SUBMENU:=SSH
 VARIANT:=without-pam
endef

define Package/openssh-moduli
 $(call Package/openssh/Default)
 DEPENDS+= +openssh-keygen
 TITLE+= moduli file
endef

define Package/openssh-moduli/description
OpenSSH server moduli file.
endef

define Package/openssh-client
 $(call Package/openssh/Default)
 TITLE+= client
 ALTERNATIVES:=\
  200:/usr/bin/ssh:/usr/libexec/ssh-openssh \
  200:/usr/bin/scp:/usr/libexec/scp-openssh
endef

define Package/openssh-client/description
OpenSSH client.
endef

define Package/openssh-client/conffiles
/etc/ssh/ssh_config
endef

define Package/openssh-client-utils
 $(call Package/openssh/Default)
 DEPENDS+= +openssh-client +openssh-keygen
 TITLE+= client utilities
endef

define Package/openssh-client-utils/description
OpenSSH client utilities.
endef

define Package/openssh-keygen
 $(call Package/openssh/Default)
 TITLE+= keygen
endef

define Package/openssh-keygen/description
OpenSSH keygen.
endef

define Package/openssh-server
 $(call Package/openssh/Default)
 DEPENDS+= +openssh-keygen +OPENSSH_LIBFIDO2:libfido2
 TITLE+= server
 USERID:=sshd=22:sshd=22
endef

define Package/openssh-server/config
 source "$(SOURCE)/Config.in"
endef

define Package/openssh-server/description
OpenSSH server.
endef

define Package/openssh-server/conffiles
/etc/ssh/sshd_config
/etc/ssh/ssh_host_ed25519_key
/etc/ssh/ssh_host_ed25519_key.pub
/etc/ssh/ssh_host_rsa_key
/etc/ssh/ssh_host_rsa_key.pub
endef

define Package/openssh-server-pam
 $(call Package/openssh/Default)
 DEPENDS+= +libpthread +openssh-keygen +libpam
 TITLE+= server (with PAM support)
 VARIANT:=with-pam
 USERID:=sshd=22:sshd=22
endef

define Package/openssh-server-pam/description
OpenSSH server (with PAM support).
endef

define Package/openssh-server-pam/conffiles
/etc/pam.d/sshd
/etc/security/access-sshd-local.conf
/etc/ssh/sshd_config
endef

define Package/openssh-sftp-client
 $(call Package/openssh/Default)
 TITLE+= SFTP client
endef

define Package/openssh-sftp-client/description
OpenSSH SFTP client.
endef

define Package/openssh-sftp-server
 $(call Package/openssh/Default)
 TITLE+= SFTP server
endef

define Package/openssh-sftp-server/description
OpenSSH SFTP server.
endef

define Package/openssh-sftp-avahi-service
 $(call Package/openssh/Default)
 TITLE+= (SFTP Avahi service)
 DEPENDS:=+openssh-sftp-server +avahi-daemon
endef

define Package/openssh-sftp-avahi-service/description
 This package contains the service definition for announcing
 SFTP support via mDNS/DNS-SD.
endef

define Package/openssh-sftp-avahi-service/conffiles
/etc/avahi/services/sftp-ssh.service
endef

CONFIGURE_ARGS += \
 --sysconfdir=/etc/ssh \
 --with-privsep-user=sshd \
 --with-privsep-path=/var/empty \
 --disable-strip \
 --disable-etc-default-login \
 --disable-lastlog \
 --disable-utmp \
 --disable-utmpx \
 --disable-wtmp \
 --disable-wtmpx \
 --without-bsd-auth \
 --without-kerberos5 \
 --with-stackprotect \
 --with$(if $(CONFIG_OPENSSL_ENGINE),,out)-ssl-engine \
 --with$(if $(CONFIG_OPENSSH_LIBFIDO2),,out)-security-key-builtin
 
ifeq ($(BUILD_VARIANT),with-pam)
CONFIGURE_ARGS += \
 --with-pam
else
CONFIGURE_ARGS += \
 --without-pam
endif

CONFIGURE_VARS += LD="$(TARGET_CC)"

ifeq ($(BUILD_VARIANT),with-pam)
TARGET_LDFLAGS += -lpthread
endif

define Build/Compile
 $(MAKE) -C $(PKG_BUILD_DIR) \
  DESTDIR="$(PKG_INSTALL_DIR)" \
  STRIP_OPT="" \
  all install
endef

define Package/openssh-moduli/install
 $(INSTALL_DIR) $(1)/etc/ssh
 $(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/ssh/moduli $(1)/etc/ssh/
endef

define Package/openssh-client/install
 $(INSTALL_DIR) $(1)/etc/ssh
 chmod 0700 $(1)/etc/ssh
 $(CP) $(PKG_INSTALL_DIR)/etc/ssh/ssh_config $(1)/etc/ssh/
 $(INSTALL_DIR) $(1)/usr/libexec
 $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/ssh $(1)/usr/libexec/ssh-openssh
 $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/scp $(1)/usr/libexec/scp-openssh
endef

define Package/openssh-client-utils/install
 $(INSTALL_DIR) $(1)/usr/bin
 $(INSTALL_BIN) $(foreach bin,add agent keyscan keysign,$(PKG_BUILD_DIR)/ssh-$(bin)) $(1)/usr/bin/
endef

define Package/openssh-keygen/install
 $(INSTALL_DIR) $(1)/usr/bin
 $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/ssh-keygen $(1)/usr/bin/
endef

define Package/openssh-server/install
 $(INSTALL_DIR) $(1)/etc/ssh
 chmod 0700 $(1)/etc/ssh
 $(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/ssh/sshd_config $(1)/etc/ssh/
 sed -r -i 's,^#(HostKey /etc/ssh/ssh_host_(rsa|ed25519)_key)$$$$,\1,' $(1)/etc/ssh/sshd_config
 $(INSTALL_DIR) $(1)/etc/init.d
 $(INSTALL_BIN) ./files/sshd.init $(1)/etc/init.d/sshd
 $(INSTALL_DIR) $(1)/lib/preinit
 $(INSTALL_BIN) ./files/sshd.failsafe $(1)/lib/preinit/99_10_failsafe_sshd
 $(INSTALL_DIR) $(1)/usr/sbin
 $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/sshd $(1)/usr/sbin/
endef


define Package/openssh-server-pam/install
 $(call Package/openssh-server/install,$(1))
 sed -i 's,#Port 22,Port 22,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#SyslogFacility AUTH,SyslogFacility AUTH,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#LogLevel INFO,LogLevel INFO,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#LoginGraceTime 2m,LoginGraceTime 2m,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#StrictModes yes,StrictModes yes,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#MaxAuthTries 6,MaxAuthTries 6,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#MaxSessions 10,MaxSessions 10,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#TCPKeepAlive yes,TCPKeepAlive yes,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#PermitRootLogin prohibit-password,PermitRootLogin yes,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#UsePAM no,UsePAM yes,g' $(1)/etc/ssh/sshd_config
 sed -i 's,#PermitEmptyPasswords yes,PermitEmptyPasswords yes,g' $(1)/etc/ssh/sshd_config
 $(INSTALL_DIR) $(1)/etc/pam.d
 $(INSTALL_DATA) ./files/sshd.pam $(1)/etc/pam.d/sshd
 $(INSTALL_DIR) $(1)/etc/security
 $(INSTALL_DATA) ./files/sshd.pam-access $(1)/etc/security/access-sshd-local.conf
endef

define Package/openssh-sftp-client/install
 $(INSTALL_DIR) $(1)/usr/bin
 $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/sftp $(1)/usr/bin/
endef

define Package/openssh-sftp-server/install
 $(INSTALL_DIR) $(1)/usr/lib
 $(CP) $(PKG_INSTALL_DIR)/usr/lib/sftp-server $(1)/usr/lib/
 $(INSTALL_DIR) $(1)/usr/libexec
 ln -sf ../lib/sftp-server $(1)/usr/libexec/sftp-server
endef

define Package/openssh-sftp-avahi-service/install
 $(INSTALL_DIR) $(1)/etc/avahi/services
 $(INSTALL_DATA) ./files/sftp-ssh.service $(1)/etc/avahi/services/
endef

$(eval $(call BuildPackage,openssh-client))
$(eval $(call BuildPackage,openssh-moduli))
$(eval $(call BuildPackage,openssh-client-utils))
$(eval $(call BuildPackage,openssh-keygen))
$(eval $(call BuildPackage,openssh-server))
$(eval $(call BuildPackage,openssh-server-pam))
$(eval $(call BuildPackage,openssh-sftp-client))
$(eval $(call BuildPackage,openssh-sftp-server))
$(eval $(call BuildPackage,openssh-sftp-avahi-service))

3,配置passwd

nano /root/tina-v853-docker/openwrt/package/allwinner/system/busybox-init-base-files/files/etc/passwd

添加一行代码

sshd:x:109:65534::/var/run/sshd:/usr/sbin/nologin

4，ssh开机脚本

nano /root/tina-v853-docker/openwrt/package/feeds/net/openssh/files/sshd.init

注释掉 procd…

配置文件

#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2011 OpenWrt.org

START=50
STOP=50

USE_PROCD=1
PROG=/usr/sbin/sshd

start_service() {
 for type in rsa ed25519
 do
  # check for keys
  key=/etc/ssh/ssh_host_${type}_key
  [ ! -f $key ] && {
   # generate missing keys
   [ -x /usr/bin/ssh-keygen ] && {
    /usr/bin/ssh-keygen -N '' -t $type -f $key 2>&- >&-
   }
  }
 done
 mkdir -m 0700 -p /var/empty

 local lport=$(awk '/^Port / { print $2; exit }' /etc/ssh/sshd_config)
 [ -z "$lport" ] && lport=22

 procd_open_instance
 #procd_add_mdns "ssh" "tcp" "$lport"
 procd_set_param command $PROG -D
 procd_close_instance
}

shutdown() {
 local pid

 stop

 # kill active clients
 for pid in $(pidof sshd)
 do
  [ "$pid" = "$$" ] && continue
  [ -e "/proc/$pid/stat" ] && kill $pid
 done
}

5.勾选编译项目 （3个）如下图（要选准哦，否则会报错）
在这里插入图片描述

  • 本文转载自：https://forums.100ask.net/t/topic/3025

http://www.kler.cn/a/15737.html

相关文章：

  • Qt / Qt Quick程序打包的一些坑 (四)
  • PETR/PETRv2/StreamPETR论文阅读
  • Python爬虫项目 | 一、网易云音乐热歌榜歌曲
  • 在Ubuntu22.04上源码构建ROS noetic环境
  • 每行数据个数在变的二维数组的输出
  • 从零开始学习 sg200x 多核开发之 TF 存储卡根文件系统扩容
  • 前端小白是如何利用chatgt用一周时间从做一款微信小程序的
  • 【MATLAB数据处理实用案例详解（15）】——利用BP神经网络实现个人信贷信用评估
  • 零基础想成为黑客，只需要四步
  • CF662C Binary Table
  • nvm安装使用详解，附gnvm介绍
  • 史上最全的接口测试，吐血整理从零到接口自动化实战...
  • 1992-2022年31省人均gdp/各省人均地区生产总值
  • @PostConstruct注解和@PreDestroy注解
  • 【AI生产力工具】Upscale.media：用AI技术提升照片质量，让你的作品更出色
  • 【LeetCode股票买卖系列:121. 买卖股票的最佳时机 | 一次遍历 | 暴力递归=＞记忆化搜索=＞动态规划】
  • 系统集成项目管理工程师 笔记（第19章：项目收尾管理）
  • 【5G RRC】RSRP、RSRQ以及SINR含义、计算过程详细介绍
  • 如何在Linkedin领英上找客户
  • VsCode镜像下载（国内镜像源，高速秒下）
  • 博世中国创新软件开发中心 BCSC
  • vue生命周期代码示范--Vue基本介绍--MVVM-示意图--数据渲染--事件绑定--修饰符--组件化--和全部代码示范
  • Python高级函数1：使用 map()、reduce()、filter()、zip() 和 enumerate() 简化代码
  • 【云台】开源版本SimpleBGC的电机驱动与控制方式
  • iVX开发中整理的常见问题与回答（三）
  • 虹科案例 | 如何通过智能、非接触式测量解决方案，提高起重机的安全和效率？