当前位置： 首页 > article >正文

LuaJit分析（九）LuaJit中的JIT原理分析

article 2024/11/15 4:00:17

Jit in luajit

Luajit是一款高性能的lua解释器，与官方的lua解释器相比，luajit的高速除了将解释器直接以汇编代码实现外，还支持jit模式（Just in time）。Jit模式即将luajit的字节码编译成处理器能够直接执行的机器码，从而比解释执行速度更快。

Luajit存在97个字节码指令，例如 FORL指令对应一个数字类型的for循环语句，同时还有IFORL指令（强制解释模式执行）和JFORL指令（Jit模式执行），同时解释器实现了对各个字节码指令的翻译，这里以X86的翻译器为例。

Luajit优化一段指令序列，当一个指令的地址被识别为hot后，并开始跟踪记录指令线性序列、在退出跟踪时将指令序列编译成机器码。但是luajit只对FUNCF、FORL、ITERL、LOOP这四个指令进行了跟踪，即循环和一个函数的开始，例如，在解释执行FORL指令：

case BC_FORL:
    |.if JIT
    |  hotloop RB
    |.endif
    | // Fall through. Assumes BC_IFORL follows and ins_AJ is a no-op.
break;

它首先判断是否是JIT模式，如果是jit模式，则调用hotloop块进行热点判断，同样的，如果是FUNCF指令，则调用hotcall块：

case BC_FUNCF:
    |.if JIT
    |  hotcall RB
    |.endif
case BC_FUNCV:  /* NYI: compiled vararg functions. */
    | // Fall through. Assumes BC_IFUNCF/BC_IFUNCV follow and ins_AD is a no-op.
break;

hotloop块的定义如下：

|// Decrement hashed hotcount and trigger trace recorder if zero.
|.macro hotloop, reg
|  mov reg, PC
|  shr reg, 1
|  and reg, HOTCOUNT_PCMASK
|  sub word [DISPATCH+reg+GG_DISP2HOT], HOTCOUNT_LOOP
|  jb ->vm_hotloop
|.endmacro

 它将当前指令的地址右移一位，并与HOTCOUNT_PCMASK与操作，得到一个索引（哈希运算），根据这个索引在数值中找到计数值，减去HOTCOUNT_LOOP，当这个计数值小于0时，跳转到vm_hotloop继续执行。

|->vm_hotloop:               // Hot loop counter underflow.
|.if JIT
|  mov LFUNC:RB, [BASE-8]           // Same as curr_topL(L).
|  mov RB, LFUNC:RB->pc
|  movzx RD, byte [RB+PC2PROTO(framesize)]
|  lea RD, [BASE+RD*8]
|  mov L:RB, SAVE_L
|  mov L:RB->base, BASE
|  mov L:RB->top, RD
|  mov FCARG2, PC
|  lea FCARG1, [DISPATCH+GG_DISP2J]
|  mov aword [DISPATCH+DISPATCH_J(L)], L:RBa
|  mov SAVE_PC, PC
|  call extern lj_trace_hot@8          // (jit_State *J, const BCIns *pc)
|  jmp <3
|.endif

首先获取当前的函数，并得到字节码PC指针，获取栈大小并保存到RD中，接着讲top的位置保存到RD中，在进行一些参数设置后，调用lj_trace_hot用于跟踪热点，该函数位于lj_trace.c中：

/* A hotcount triggered. Start recording a root trace. */
void LJ_FASTCALL lj_trace_hot(jit_State *J, const BCIns *pc)
{
  /* Note: pc is the interpreter bytecode PC here. It's offset by 1. */
  ERRNO_SAVE
  /* Reset hotcount. */
  hotcount_set(J2GG(J), pc, J->param[JIT_P_hotloop]*HOTCOUNT_LOOP);
  /* Only start a new trace if not recording or inside __gc call or vmevent. */
  if (J->state == LJ_TRACE_IDLE &&
      !(J2G(J)->hookmask & (HOOK_GC|HOOK_VMEVENT))) {
    J->parent = 0;  /* Root trace. */
    J->exitno = 0;
    J->state = LJ_TRACE_START;
    lj_trace_ins(J, pc-1);
  }
  ERRNO_RESTORE
}

它将状态设置为LJ_TRACE_START后，开始调用lj_trace_ins进行热点跟踪：

/* A bytecode instruction is about to be executed. Record it. */
void lj_trace_ins(jit_State *J, const BCIns *pc)
{
  /* Note: J->L must already be set. pc is the true bytecode PC here. */
  J->pc = pc;
  J->fn = curr_func(J->L);
  J->pt = isluafunc(J->fn) ? funcproto(J->fn) : NULL;
  while (lj_vm_cpcall(J->L, NULL, (void *)J, trace_state) != 0)
    J->state = LJ_TRACE_ERR;
}

这里的pc是指向的字节码指令，在循环中不断执行和跟踪，这里的跟踪通过trace_state函数实现，这个函数存在7种状态：

/* Trace compiler state. */
typedef enum {
  LJ_TRACE_IDLE,  /* Trace compiler idle. */
  LJ_TRACE_ACTIVE = 0x10,
  LJ_TRACE_RECORD,  /* Bytecode recording active. */
  LJ_TRACE_START, /* New trace started. */
  LJ_TRACE_END,   /* End of trace. */
  LJ_TRACE_ASM,   /* Assemble trace. */
  LJ_TRACE_ERR    /* Trace aborted with error. */
} TraceState;

IDLE表示空闲、RECORD表示正在跟踪记录、END表示结束、ASM表示开始编译机器指令，这个状态转换函数的实现如下：

/* State machine for the trace compiler. Protected callback. */
static TValue *trace_state(lua_State *L, lua_CFunction dummy, void *ud)
{
  jit_State *J = (jit_State *)ud;
  UNUSED(dummy);
  do {
  retry:
    switch (J->state) {
    case LJ_TRACE_START:
      J->state = LJ_TRACE_RECORD;  /* trace_start() may change state. */
      trace_start(J);
      lj_dispatch_update(J2G(J));
      break;
    case LJ_TRACE_RECORD:
      trace_pendpatch(J, 0);
      setvmstate(J2G(J), RECORD);
      lj_vmevent_send_(L, RECORD,
  /* Save/restore tmptv state for trace recorder. */
  TValue savetv = J2G(J)->tmptv;
  TValue savetv2 = J2G(J)->tmptv2;
  setintV(L->top++, J->cur.traceno);
  setfuncV(L, L->top++, J->fn);
  setintV(L->top++, J->pt ? (int32_t)proto_bcpos(J->pt, J->pc) : -1);
  setintV(L->top++, J->framedepth);
  J2G(J)->tmptv = savetv;
  J2G(J)->tmptv2 = savetv2;
      );
      lj_record_ins(J);
      break;
    case LJ_TRACE_END:
      trace_pendpatch(J, 1);
      J->loopref = 0;
      if ((J->flags & JIT_F_OPT_LOOP) &&
    J->cur.link == J->cur.traceno && J->framedepth + J->retdepth == 0) {
  setvmstate(J2G(J), OPT);
  lj_opt_dce(J);
  if (lj_opt_loop(J)) {  /* Loop optimization failed? */
    J->cur.link = 0;
    J->cur.linktype = LJ_TRLINK_NONE;
    J->loopref = J->cur.nins;
    J->state = LJ_TRACE_RECORD;  /* Try to continue recording. */
    break;
  }
  J->loopref = J->chain[IR_LOOP];  /* Needed by assembler. */
      }
      lj_opt_split(J);
      lj_opt_sink(J);
      if (!J->loopref) J->cur.snap[J->cur.nsnap-1].count = SNAPCOUNT_DONE;
      J->state = LJ_TRACE_ASM;
      break;
  
    case LJ_TRACE_ASM:
      setvmstate(J2G(J), ASM);
      lj_asm_trace(J, &J->cur);
      trace_stop(J);
      setvmstate(J2G(J), INTERP);
      J->state = LJ_TRACE_IDLE;
      lj_dispatch_update(J2G(J));
      return NULL;
    default:  /* Trace aborted asynchronously. */
      setintV(L->top++, (int32_t)LJ_TRERR_RECERR);
      /* fallthrough */
    case LJ_TRACE_ERR:
      trace_pendpatch(J, 1);
      if (trace_abort(J))
  goto retry;
      setvmstate(J2G(J), INTERP);
      J->state = LJ_TRACE_IDLE;
      lj_dispatch_update(J2G(J));
      return NULL;
    }
  } while (J->state > LJ_TRACE_RECORD);
  return NULL;
}

它根据不同的状态执行不同的操作函数，我们可以简化为：

/* State machine for the trace compiler. Protected callback. */
static TValue *trace_state(lua_State *L, lua_CFunction dummy, void *ud)
{
  jit_State *J = (jit_State *)ud;
  UNUSED(dummy);
  do {
  retry:
    switch (J->state) {
    case LJ_TRACE_START:
      J->state = LJ_TRACE_RECORD;  /* trace_start() may change state. */
      trace_start(J);
      lj_dispatch_update(J2G(J));
      break;
    case LJ_TRACE_RECORD:
      lj_record_ins(J);
      break;
    case LJ_TRACE_END:
      trace_pendpatch(J, 1);
      J->state = LJ_TRACE_ASM;
      break;
    case LJ_TRACE_ASM:
      setvmstate(J2G(J), ASM);
      lj_asm_trace(J, &J->cur);
      trace_stop(J);
      setvmstate(J2G(J), INTERP);
      J->state = LJ_TRACE_IDLE;
      lj_dispatch_update(J2G(J));
      return NULL;
    default:  /* Trace aborted asynchronously. */
      setintV(L->top++, (int32_t)LJ_TRERR_RECERR);
    case LJ_TRACE_ERR:
      trace_pendpatch(J, 1);
      if (trace_abort(J))
  goto retry;
      setvmstate(J2G(J), INTERP);
      J->state = LJ_TRACE_IDLE;
      lj_dispatch_update(J2G(J));
      return NULL;
    }
  } while (J->state > LJ_TRACE_RECORD);
  return NULL;
}

Trace_start用于初始化trace结构，分配一个traceno等，它是一个数组的下标，其中比较重要的是lj_record_ins函数，它用于记录一个字节码指令，并保存为一个SSA中间代码IR形式，IR的定义在lj_ir.c中：

/* -- IR instructions ----------------------------------------------------- */
/* IR instruction definition. Order matters, see below. ORDER IR */
#define IRDEF(_) \
  /* Guarded assertions. */ \
  /* Must be properly aligned to flip opposites (^1) and (un)ordered (^4). */ \
  _(LT,   N , ref, ref) \
  _(GE,   N , ref, ref) \
  _(LE,   N , ref, ref) \
  _(GT,   N , ref, ref) \
  \
  _(ULT,  N , ref, ref) \
  _(UGE,  N , ref, ref) \
  _(ULE,  N , ref, ref) \
  _(UGT,  N , ref, ref) \
  \
  _(EQ,   C , ref, ref) \
  _(NE,   C , ref, ref) \
  \
  _(ABC,  N , ref, ref) \
  _(RETF, S , ref, ref) \
  \
  /* Miscellaneous ops. */ \
  _(NOP,  N , ___, ___) \
  _(BASE, N , lit, lit) \
  _(PVAL, N , lit, ___) \
  _(GCSTEP, S , ___, ___) \
  _(HIOP, S , ref, ref) \
  _(LOOP, S , ___, ___) \
  _(USE,  S , ref, ___) \
  _(PHI,  S , ref, ref) \
  _(RENAME, S , ref, lit) \
  _(PROF, S , ___, ___) \
  \
  /* Constants. */ \
  _(KPRI, N , ___, ___) \
  _(KINT, N , cst, ___) \
  _(KGC,  N , cst, ___) \
  _(KPTR, N , cst, ___) \
  _(KKPTR,  N , cst, ___) \
  _(KNULL,  N , cst, ___) \
  _(KNUM, N , cst, ___) \
  _(KINT64, N , cst, ___) \
  _(KSLOT,  N , ref, lit) \
  \
  /* Bit ops. */ \
  _(BNOT, N , ref, ___) \
  _(BSWAP,  N , ref, ___) \
  _(BAND, C , ref, ref) \
  _(BOR,  C , ref, ref) \
  _(BXOR, C , ref, ref) \
  _(BSHL, N , ref, ref) \
  _(BSHR, N , ref, ref) \
  _(BSAR, N , ref, ref) \
  _(BROL, N , ref, ref) \
  _(BROR, N , ref, ref) \
  \
  /* Arithmetic ops. ORDER ARITH */ \
  _(ADD,  C , ref, ref) \
  _(SUB,  N , ref, ref) \
  _(MUL,  C , ref, ref) \
  _(DIV,  N , ref, ref) \
  _(MOD,  N , ref, ref) \
  _(POW,  N , ref, ref) \
  _(NEG,  N , ref, ref) \
  \
  _(ABS,  N , ref, ref) \
  _(ATAN2,  N , ref, ref) \
  _(LDEXP,  N , ref, ref) \
  _(MIN,  C , ref, ref) \
  _(MAX,  C , ref, ref) \
  _(FPMATH, N , ref, lit) \
  \
  /* Overflow-checking arithmetic ops. */ \
  _(ADDOV,  CW, ref, ref) \
  _(SUBOV,  NW, ref, ref) \
  _(MULOV,  CW, ref, ref) \
  \
  /* Memory ops. A = array, H = hash, U = upvalue, F = field, S = stack. */ \
  \
  /* Memory references. */ \
  _(AREF, R , ref, ref) \
  _(HREFK,  R , ref, ref) \
  _(HREF, L , ref, ref) \
  _(NEWREF, S , ref, ref) \
  _(UREFO,  LW, ref, lit) \
  _(UREFC,  LW, ref, lit) \
  _(FREF, R , ref, lit) \
  _(STRREF, N , ref, ref) \
  _(LREF, L , ___, ___) \
  \
  /* Loads and Stores. These must be in the same order. */ \
  _(ALOAD,  L , ref, ___) \
  _(HLOAD,  L , ref, ___) \
  _(ULOAD,  L , ref, ___) \
  _(FLOAD,  L , ref, lit) \
  _(XLOAD,  L , ref, lit) \
  _(SLOAD,  L , lit, lit) \
  _(VLOAD,  L , ref, ___) \
  \
  _(ASTORE, S , ref, ref) \
  _(HSTORE, S , ref, ref) \
  _(USTORE, S , ref, ref) \
  _(FSTORE, S , ref, ref) \
  _(XSTORE, S , ref, ref) \
  \
  /* Allocations. */ \
  _(SNEW, N , ref, ref)  /* CSE is ok, not marked as A. */ \
  _(XSNEW,  A , ref, ref) \
  _(TNEW, AW, lit, lit) \
  _(TDUP, AW, ref, ___) \
  _(CNEW, AW, ref, ref) \
  _(CNEWI,  NW, ref, ref)  /* CSE is ok, not marked as A. */ \
  \
  /* Buffer operations. */ \
  _(BUFHDR, L , ref, lit) \
  _(BUFPUT, L , ref, ref) \
  _(BUFSTR, A , ref, ref) \
  \
  /* Barriers. */ \
  _(TBAR, S , ref, ___) \
  _(OBAR, S , ref, ref) \
  _(XBAR, S , ___, ___) \
  \
  /* Type conversions. */ \
  _(CONV, NW, ref, lit) \
  _(TOBIT,  N , ref, ref) \
  _(TOSTR,  N , ref, lit) \
  _(STRTO,  N , ref, ___) \
  \
  /* Calls. */ \
  _(CALLN,  N , ref, lit) \
  _(CALLA,  A , ref, lit) \
  _(CALLL,  L , ref, lit) \
  _(CALLS,  S , ref, lit) \
  _(CALLXS, S , ref, ref) \
  _(CARG, N , ref, ref) \
  \
  /* End of list. */


多种情况都会出现结束记录的情况，如遇到了已经编译的指令。在LJ_TRACE_ASM状态下会进行代码的编译操作lj_asm_trace函数位于lj_asm.c中，函数中有一个循环如下：

  /* Assemble a trace in linear backwards order. */
  for (as->curins--; as->curins > as->stopins; as->curins--) {
    IRIns *ir = IR(as->curins);
    lua_assert(!(LJ_32 && irt_isint64(ir->t)));  /* Handled by SPLIT. */
    if (!ra_used(ir) && !ir_sideeff(ir) && (as->flags & JIT_F_OPT_DCE))
continue;  /* Dead-code elimination can be soooo easy. */
    if (irt_isguard(ir->t))
asm_snap_prep(as);
    RA_DBG_REF();
    checkmclim(as);
    asm_ir(as, ir);
  }

它调用asm_ir将所有的ir指令转换成机器码，在lj_asm_trace函数后，接着调用trace_stop函数结束一个跟踪，该函数实现如下：

/* Stop tracing. */
static void trace_stop(jit_State *J)
{
  BCIns *pc = mref(J->cur.startpc, BCIns);
  BCOp op = bc_op(J->cur.startins);
  GCproto *pt = &gcref(J->cur.startpt)->pt;
  TraceNo traceno = J->cur.traceno;
  GCtrace *T = J->curfinal;
  lua_State *L;
  switch (op) {
  case BC_FORL:
    setbc_op(pc+bc_j(J->cur.startins), BC_JFORI);  /* Patch FORI, too. */
    /* fallthrough */
  case BC_LOOP:
  case BC_ITERL:
  case BC_FUNCF:
    /* Patch bytecode of starting instruction in root trace. */
    setbc_op(pc, (int)op+(int)BC_JLOOP-(int)BC_LOOP);
    setbc_d(pc, traceno);
  addroot:
    /* Add to root trace chain in prototype. */
    J->cur.nextroot = pt->trace;
    pt->trace = (TraceNo1)traceno;
    break;
  case BC_RET:
  case BC_RET0:
  case BC_RET1:
    *pc = BCINS_AD(BC_JLOOP, J->cur.snap[0].nslots, traceno);
    goto addroot;
  case BC_JMP:
    /* Patch exit branch in parent to side trace entry. */
    lua_assert(J->parent != 0 && J->cur.root != 0);
    lj_asm_patchexit(J, traceref(J, J->parent), J->exitno, J->cur.mcode);
    /* Avoid compiling a side trace twice (stack resizing uses parent exit). */
    traceref(J, J->parent)->snap[J->exitno].count = SNAPCOUNT_DONE;
    /* Add to side trace chain in root trace. */
    {
      GCtrace *root = traceref(J, J->cur.root);
      root->nchild++;
      J->cur.nextside = root->nextside;
      root->nextside = (TraceNo1)traceno;
    }
    break;
  case BC_CALLM:
  case BC_CALL:
  case BC_ITERC:
    /* Trace stitching: patch link of previous trace. */
    traceref(J, J->exitno)->link = traceno;
    break;
  default:
    lua_assert(0);
    break;
  }
  
  /* Commit new mcode only after all patching is done. */
  lj_mcode_commit(J, J->cur.mcode);
  J->postproc = LJ_POST_NONE;
  trace_save(J, T);
  
  L = J->L;
  lj_vmevent_send(L, TRACE,
    setstrV(L, L->top++, lj_str_newlit(L, "stop"));
    setintV(L->top++, traceno);
    setfuncV(L, L->top++, J->fn);
  );
}

它通过如下两个函数：

setbc_op(pc, (int)op+(int)BC_JLOOP-(int)BC_LOOP);
setbc_d(pc, traceno);

重新设置指令的opcode，即J_op = op + BC_JLOOP – BC_LOOP，那么如果将lj_bc.h中的指令随意打乱会影响到这里的正确性。

修改后的指令为：j_op  traceno

同时可以看到pt->trace字段记录的是一个traceno

pt->trace = (TraceNo1)traceno;

那么接下来看解释器中对JFORL的实现：

case BC_JFORI:
  case BC_JFORL:
#if !LJ_HASJIT
    break;
#endif
  case BC_FORI:
  case BC_IFORL:
    vk = (op == BC_IFORL || op == BC_JFORL);
    |  ins_AJ // RA = base, RD = target (after end of loop or start of loop)
    |  lea RA, [BASE+RA*8]
    if (LJ_DUALNUM) {
      |  cmp FOR_TIDX, LJ_TISNUM; jne >9
      if (!vk) {
       |  cmp FOR_TSTOP, LJ_TISNUM; jne ->vmeta_for
       |  cmp FOR_TSTEP, LJ_TISNUM; jne ->vmeta_for
       |  mov RB, dword FOR_IDX
       |  cmp dword FOR_STEP, 0; jl >5
      } else {
#ifdef LUA_USE_ASSERT
       |  cmp FOR_TSTOP, LJ_TISNUM; jne ->assert_bad_for_arg_type
       |  cmp FOR_TSTEP, LJ_TISNUM; jne ->assert_bad_for_arg_type
#endif
       |  mov RB, dword FOR_STEP
       |  test RB, RB; js >5
       |  add RB, dword FOR_IDX; jo >1
       |  mov dword FOR_IDX, RB
      }
      |  cmp RB, dword FOR_STOP
      |  mov FOR_TEXT, LJ_TISNUM
      |  mov dword FOR_EXT, RB
      if (op == BC_FORI) {
       |  jle >7
       |1:
       |6:
       |  branchPC RD
      } else if (op == BC_JFORI) {
       |  branchPC RD
       |  movzx RD, PC_RD
       |  jle =>BC_JLOOP
       |1:
       |6:
      } else if (op == BC_IFORL) {
       |  jg >7
       |6:
       |  branchPC RD
       |1:
      } else {
       |  jle =>BC_JLOOP
       |1:
       |6:
      }

当op = JFORL时，跳转到BC_JLOOP，如下：

case BC_JLOOP:
    |.if JIT
    |  ins_AD      // RA = base (ignored), RD = traceno
    |  mov RA, [DISPATCH+DISPATCH_J(trace)]
    |  mov TRACE:RD, [RA+RD*4]
    |  mov RDa, TRACE:RD->mcode
    |  mov L:RB, SAVE_L
    |  mov [DISPATCH+DISPATCH_GL(jit_base)], BASE
    |  mov [DISPATCH+DISPATCH_GL(tmpbuf.L)], L:RB
    |  // Save additional callee-save registers only used in compiled code.
    |.if X64WIN
    |  mov TMPQ, r12
    |  mov TMPa, r13
    |  mov CSAVE_4, r14
    |  mov CSAVE_3, r15
    |  mov RAa, rsp
    |  sub rsp, 9*16+4*8
    |  movdqa [RAa], xmm6
    |  movdqa [RAa-1*16], xmm7
    |  movdqa [RAa-2*16], xmm8
    |  movdqa [RAa-3*16], xmm9
    |  movdqa [RAa-4*16], xmm10
    |  movdqa [RAa-5*16], xmm11
    |  movdqa [RAa-6*16], xmm12
    |  movdqa [RAa-7*16], xmm13
    |  movdqa [RAa-8*16], xmm14
    |  movdqa [RAa-9*16], xmm15
    |.elif X64
    |  mov TMPQ, r12
    |  mov TMPa, r13
    |  sub rsp, 16
    |.endif
    |  jmp RDa
    |.endif
break;

先根据RD中保存的traceno获取到trace结构，并将trace结构中保存的机器码赋值在Rda中，进行堆栈转换后，jmp Rda直接跳转到机器码处执行。

在x86中，当字节码执行结束，继续执行下一个字节码时，都会使用ins_next块，它的定义如下：

|.macro ins_NEXT
|  mov RC, [PC]
|  movzx RA, RCH
|  movzx OP, RCL
|  add PC, 4
|  shr RC, 16
|.if X64
|  jmp aword [DISPATCH+OP*8]
|.else
|  jmp aword [DISPATCH+OP*4]
|.endif
|.endmacro

它从PC指向的字节码中获取了opcode，并跳转到DISPATCH + OP *4的地方执行，可以看出OP实质上保存的是数组的下标而这些数组元素都指向了vm_record汇编块：

|->vm_record:                        // Dispatch target for recording phase.
 |.if JIT
 |  movzx RD, byte [DISPATCH+DISPATCH_GL(hookmask)]
 |  test RDL, HOOK_VMEVENT       // No recording while in vmevent.
 |  jnz >5
 |  // Decrement the hookcount for consistency, but always do the call.
 |  test RDL, HOOK_ACTIVE
 |  jnz >1
 |  test RDL, LUA_MASKLINE|LUA_MASKCOUNT
 |  jz >1
 |  dec dword [DISPATCH+DISPATCH_GL(hookcount)]
 |  jmp >1
 |.endif
 |
 |->vm_rethook:               // Dispatch target for return hooks.
 |  movzx RD, byte [DISPATCH+DISPATCH_GL(hookmask)]
 |  test RDL, HOOK_ACTIVE            // Hook already active?
 |  jnz >5
 |  jmp >1
 |
 |->vm_inshook:               // Dispatch target for instr/line hooks.
 |  movzx RD, byte [DISPATCH+DISPATCH_GL(hookmask)]
 |  test RDL, HOOK_ACTIVE            // Hook already active?
 |  jnz >5
 |
 |  test RDL, LUA_MASKLINE|LUA_MASKCOUNT
 |  jz >5
 |  dec dword [DISPATCH+DISPATCH_GL(hookcount)]
 |  jz >1
 |  test RDL, LUA_MASKLINE
 |  jz >5
 |1:
 |  mov L:RB, SAVE_L
 |  mov L:RB->base, BASE
 |  mov FCARG2, PC               // Caveat: FCARG2 == BASE
 |  mov FCARG1, L:RB
 |  // SAVE_PC must hold the _previous_ PC. The callee updates it with PC.
 |  call extern lj_dispatch_ins@8      // (lua_State *L, const BCIns *pc)
 |3:
 |  mov BASE, L:RB->base
 |4:
 |  movzx RA, PC_RA
 |5:
 |  movzx OP, PC_OP
 |  movzx RD, PC_RD
 |.if X64
 |  jmp aword [DISPATCH+OP*8+GG_DISP2STATIC]   // Re-dispatch to static ins.
 |.else
 |  jmp aword [DISPATCH+OP*4+GG_DISP2STATIC]   // Re-dispatch to static ins.
 |.endif

调用lj_dispatch_ins后，最终跳转到DISPATCH+OP*4+GG_DISP2STATIC这个地址继续执行，这个地址正是每个opcode对应的解释器汇编块。

Jit的正常运行还涉及堆栈状态的转换、jit模式到解释模式的跳转等（SSA守护代码），远不止这些。


http://www.kler.cn/a/284185.html

相关文章：

  • Java面向对象高级2
  • redis7.x源码分析:(1) sds动态字符串
  • 【MySQL 保姆级教学】事务的隔离级别（详细）--下（13）
  • 山泽光纤HDMI线：铜线的隐藏力量
  • MySQL系列之如何在Linux只安装客户端
  • 【OceanBase 诊断调优】—— ocp上针对OB租户CPU消耗计算逻辑
  • Codeforces Round 969 (Div. 2 ABCDE题) 视频讲解
  • 热门跨境平台的IP代理如何选择？入局IP知识
  • Python编写BC260Y TCP数据收发压力测试脚本
  • 创建SQLiteOpenHelper 类来创建和管理SQLite数据库
  • vue2踩坑记录：el-select如何绑定对象
  • 二叉树详解（2）
  • Ethercat设备数据 转IEC61850项目案例
  • zyx青岛实训day34 初步了解Docker与套接字的应用
  • 行为模式7.解释器模式------DSL语言
  • Linux动态库搜索路径相关知识文章
  • UE4 使用AndroidGameDevelopmentExtension（AGDE）对安卓客户端做“断点调试”与“代码热更”
  • Nginx代理MinIO界面
  • Vue.js入门系列（十八）：利用浏览器本地存储实现TodoList数据持久化
  • 全国设计院排名 境外工程总承包营业额二〇二三年排名
  • 在 Deepin 系统中搭建 Node.js 开发环境
  • 【STM32】RTC
  • 打卡第60天------图论
  • OceanBase V4 技术解读：从Alter Table 看DDL的支持
  • Linux CentOS 添加路由
  • 江协科技stm32————10-3 软件I2C读写MPU6050