当前位置： 首页 > article >正文

网络属性及相关配置常用命令-下篇

article 2024/11/22 20:43:30

nmcli

nmcli con
nmcli dev show ens160

nmcli con mod ens160 +ipv4.address 10.0.0.119/24 #同一设备新增一条配置+ipv4.address
nmcli con down ens160;nmcli con reload;nmcli con up ens160 
ip a |grep 'inet 1'

nmcli con mod ens160 -ipv4.addresses 10.0.0.119/24#同一设备删除一条配置+ipv4.address
nmcli con down ens160;nmcli con reload;nmcli con up ens160 
ip a |grep 'inet 1'

#新增一张网卡
ip a|grep mtu
nmcli con add con-name ens224 type ethernet ifname ens224
ip a s ens224 
ls /etc/NetworkManager/system-connections
rm -rf /etc/NetworkManager/system-connections/con-*
nmcli con downens224;nmcli con reload;nmcli con up ens224
nmcli con add con-name ens224 ipv4.addresses 10.0.0.200/16 ipv4.gateway 10.0.0.2 ipv4.dns 10.0.0.2 ipv4.method manual type ethernet ifname ens224 #基本都是去配置文件中修改
ip a s ens224
cat /etc/NetworkManager/system-connections/ens224.nmconnection

网卡绑定

openEuler

ip a s
nmcli con
nmcli dev
#定制网卡配置
cat > /etc/sysconfig/network-scripts/ifcfg-bond0 <<-eof
 NAME=bond0
 TYPE=bond
 DEVICE=bond0
 BOOTPROTO=none
 IPADDR=192.168.8.122
 PREFIX=24
 BONDING_OPTS="mode=1 miimon=100 fail_over_mac=1"
 eof
 
cat > /etc/sysconfig/network-scripts/ifcfg-ens224 <<-eof
 NAME=ens224
 DEVICE=ens224
 BOOTPROTO=none
 MASTER=bond0
 SLAVE=yes
 ONBOOT=yes
 eof
 
cat > /etc/sysconfig/network-scripts/ifcfg-ens256 <<-eof
 NAME=ens256
 DEVICE=ens256
 BOOTPROTO=none
 MASTER=bond0
 SLAVE=yes
 ONBOOT=yes
 eof
 
 ls /etc/sysconfig/network-scripts
 systemctl restart NetworkManager
 nmcli con reload
 ip a
 nmcli con
 nmcli dev
 cat /proc/net/bonding/bond0
 
 #异常测试
 ping 192.168.8.122
 ip link set ens224 down
 cat /proc/net/bonding/bond0
 #删除绑定网卡
 nmcli con down bond0
 nmcli dev
 rm -rf /etc/sysconfig/network-scripts/ifcfg-{bond0,ens224,ens256}
 systemctl restart NetworkManager
 nmcli con reload

rocky9

ip a
nmcli con 
nmcli dev
nmcli con add type bond con-name bond0 ifname bond0 bond.options "mode=active-backup,miimon=1000"
nmcli con add type ethernet slave-type bond con-name bond0-port1 ifname ens224 master bond0
nmcli con add type ethernet slave-type bond con-name bond0-port2 ifname ens256 master bond0
nmcli connection modify bond0 ipv4.addresses '192.168.8.123/24' ipv4.gateway '192.168.8.2' ipv4.method manual
nmcli con up bond0
nmcli con up bond0-port1
nmcli con up bond0-port2
ls /etc/NetworkManager/system-connections
nmcli con
nmcli dev
ip a
cat /proc/net/bonding/bond0
#异常测试
ping 192.168.8.123
ip link set ens224 down
cat /proc/net/bonding/bond0
#清理环境
nmcli con delete bond0
nmcli con delete bond0-port1
nmcli con delete bond0-port2

ubuntu

ip a
nmcli con
nmcli dev
vim /etc/netplan/bond0.yaml
network:
 ethernets:
     ens37:
         addresses: []
         dhcp4: false
     ens38:
         addresses: []
         dhcp4: false
 version: 2
 bonds:
     bond0:
         addresses: [192.168.8.124/24]
         interfaces: [ens37,ens38]
         parameters:
        	 mode: balance-rr
 
netplan apply
nmcli dev
nmcli con
cat /proc/net/bonding/bond0
#异常测试
ping 192.168.8.124
ip link set ens37 down
cat /proc/net/bonding/bond0
rm -f /etc/netplan/bond0.yaml
netplan apply

网络组

openEuler/rocky9/ubuntu

#环境准备
nmcli con up team0
yum install -y teamd NetworkManager-team
systemctl restart NetworkManager

ip a
nmcli con 
nmcli dev
#创建网络组接口
#nmcli con add type team con-name CON-NAME ifname TEAM-NAME config 'CONFIG-JSON-STRING'
#创建port接口
#nmcli con add type team-slave con-name CON-PORT-NAME ifname CON-TEAM-NAME master TEAM-NAME
#创建网络组
nmcli con add type con-name team0 ifname team0 config '{"runner":{"name":"loadbalance"}}' ipv4.addresses 192.168.8.100/8 ipv4.method
nmcli con add con-name team0-ens224 type team-slave ifname ens224 master team0
nmcli con add con-name team0-ens256 type team-slave ifname ens256 master team0
ls /etc/sysconfig/network-scripts/
nmcli con reload;nmcli con
#启用网络组设备
nmcli con up team0
nmcli con up team0-ens224
nmcli con up team0-ens256
ip a
nmcli con
nmcli dev
teamdctl team0 state
#异常测试
ping 192.168.8.100
ip link set ens224 down
teamdctl team0 state
#删除
nmcli con down team0
nmcli con del team0
nmcli con del team0-ens224
nmcli con del team0-ens256
#修改配置文件实现
cat >/etc/sysconfig/network-scripts/ifcfg-team0<<-eof
DEVICE=team0
 DEVICETYPE=Team
 TEAM_CONFIG="{\"runner\":{\"name\":\"loadbalance\"}}"
 BOOTPROTO=none
 IPADDR=192.168.8.100
PREFIX=24
 NAME=team0
 ONBOOT=yes
 eof
 
  cat > /etc/sysconfig/network-scripts/ifcfg-team0-ens224 <<-eof
 DEVICE=ens224
 DEVICETYPE=TeamPort
 TEAM_MASTER=team0
 NAME=team0-ens224
 ONBOOT=yes
 eof
 
  cat > /etc/sysconfig/network-scripts/ifcfg-team0-ens256 <<-eof
 DEVICE=ens256
 DEVICETYPE=TeamPort
 TEAM_MASTER=team0
 NAME=team0-ens256
 ONBOOT=yes
 eof
 
 ls /etc/sysconfig/network-scripts
 systemctl restart NetworkManager
 nmcli con reload;nmcli con up team0
 #环境清理
 nmcli con down team0
 nmcli con del team0
 nmcli con del team0-ens224
 nmcli con del team0-ens256

rocky9

#创建网络组
nmcli con add type team con-name team0 ifname team0 team.runner activebackup
nmcli con modify team0 team.link-watchers "name=ethtool delay-up=1000"
nmcli con add type ethernet slave-type team con-name team0-port1 ifname ens224 master team0
nmcli con add type ehternet slave-type team con-name team0-port2 ifname ens256 master team0
nmcli dev
nmcli con
nmcli con modify team0 ipv4.addresses '192.168.8.123/24' ipv4.gateway '192.168.8.2' ipv4.method manual
systemctl restart NetworkManager
nmcli con reload;nmcli con up team0
teamdctl team0 state
#异常测试等后续与openEuler相同

ubuntu

#创建网络组
nmcli con add type team con-name team0 ifname team0 config '{"runner":{"name":"activebackup"}}' ipv4.addresses 192.168.8.124/24 ipv4.method manual ipv6.method disabled
nmcli con add con-name team0-ens37 type team-slave ifname ens37 master team0
nmcli con add con-name team0-ens38 type team-slave ifname ens38 master team0
netplan apply
nmcli con reload;nmcli con up team0
ls /etc/netplan/90-*
ip a s
nmcli con
nmcli dev
teamdctl team0 state
#异常测试等后续与openEuler相同

网桥（交换机）

网桥

#环境准备
#rocky
cat /etc/NetworkManager/system-connection/ens161.nmconnection
[connection]
 id=ens161
 type=ethernet
 autoconnect-priority=-999
 interface-name=ens161
 [ethernet]
 [ipv4]
 address1=172.16.1.110/16
 method=manual
systemctl restart NetworkManager
#openEuler
cat /etc/sysconfig/network-scripts/ifcfg-ens160
TYPE=Ethernet
BOOTPROTO=none
 DEFROUTE=yes
 IPV4_FAILURE_FATAL=no
 NAME=ens160
 DEVICE=ens160
 ONBOOT=yes
 IPADDR=172.16.1.114
 PREFIX=16
systemctl restart NetworkManager
#ubuntu
rm -rf /etc/netplan/*
netplan apply
ip route del 10.0.0.0/24
ip route del default

#添加网桥
#ubuntu上
nmcli con add type bridge con-name br0 ifname br0
nmcli con up br0
nmcli con add type bridge-slave con-name br0-port0 ifname ens160 master br0
nmcli con add type bridge-slave con-name br0-port1 ifname ens192 master br0
nmcli con up br0-port0
nmcli con up br0-port1
nmcli con
nmcli dev show br0
nmcli dev show ens192
nmcli dev show ens160
bridge link show
ip link show master br0
#rocky上
ping 172.16.1.114
#openEuler
ping 172.16.1.110

#网桥移除,ubuntu上
nmcli con down br0
nmcli con del br0
nmcli con down br0-port0
nmcli con del br0-port0
nmcli con down br0-port1
nmcli con del br0-port1brctl

brctl

brctl addbr br0
brctl show
brctl stp br0 on 
brctl show
brctl addif br0 ens33
brctl addif br0 ens37
brctl show
ip link set br0 up
ip link set ens33 up
ip link set ens37 up 
nmcli dev show br0
nmcli con
#rocky
ping 172.16.1.114
#openEuler
ping 172.16.1.110
#删除网桥
ip link set br0 down
ip link set ens33 down
ip link set ens37 down
brctl delif br0 ens33
brctl delif br0 ens37
brctl delbr br0

fping

yum install fping
用ping替代

tcpdump

#抓包
ifconfig |grep flags
tcpdump -D
tcpdump
tcpdump -c 1
tcpdump -i ens160
#host监听特定主机
tcpdump host 10.0.0.100
tcpdump src host 10.0.0.13
tcpdump dst host 10.0.0.13
# port监听特定端口
tcpdump port 3000
tcpdump tcp
tcpdump tcp port 22 and src host 10.0.0.100
# 特定主机间监测
tcpdump ip host 10.0.0.12 and 10.0.0.13 
tcpdump ip host 10.0.0.12 and ! 10.0.0.1

nmap

#网段扫描
yum/apt install nmap
#主机范围扫描
nmap 10.0.0.0/24
nmap 10.0.0.12/24
nmap 10.0.0.10-15
nmap 10.0.0.10 10.0.0.12 10.0.0.15 10.0.0.100
cat > host.txt <<-eof
nmap -i hosts.txt
#端口范围扫描
nmap -p22,80,3306 10.0.0.12
nmap -n -p 80 10.0.0.12
nmap -p 1024-65535 localhost
#加速扫描
nmap --min-parallelism 2000 10.0.0.12-15
nmap -p0 10.0.0.1-10
#其他扫描
nmap -O 10.0.0.12
nmap -A 10.0.0.12

nc

#监听
yum install nc
apt install netcat-openbsd
#监听本地端口
nc -vl 8888 #终端A
nc -vl 127.0.0.1 8888#终端B
nc -vl 8888#终端A
#文件传输实践
nc -l 8888 > received.txt

echo nihao > file.txt
nc 127.0.0.1 8888 < file.txt

nc -l 8888 > received.txt
cat received.txt
#传输目录实践
nc -l 8888|tar -xzvf -

mkdir file;cp /etc/fstab file/; cp ~/.bashrc file
ls file -a
tar -czvf - file|nc 127.0.0.1 8888
nc -l 8888|tar -xzvf -
ls -a file
#网络安全攻击
nc -l 8888 -e /bin/bash

nc -v 127.0.0.1 8888

nc -l 8888 -e /bin/bash
ls
ls attack
id attack

parallelism 2000 10.0.0.12-15
nmap -p0 10.0.0.1-10
#其他扫描
nmap -O 10.0.0.12
nmap -A 10.0.0.12


# nc

```bash

```bash

```bash
```powershell
#监听
yum install nc
apt install netcat-openbsd
#监听本地端口
nc -vl 8888 #终端A
nc -vl 127.0.0.1 8888#终端B
nc -vl 8888#终端A
#文件传输实践
nc -l 8888 > received.txt

echo nihao > file.txt
nc 127.0.0.1 8888 < file.txt

nc -l 8888 > received.txt
cat received.txt
#传输目录实践
nc -l 8888|tar -xzvf -

mkdir file;cp /etc/fstab file/; cp ~/.bashrc file
ls file -a
tar -czvf - file|nc 127.0.0.1 8888
nc -l 8888|tar -xzvf -
ls -a file
#网络安全攻击
nc -l 8888 -e /bin/bash

nc -v 127.0.0.1 8888

nc -l 8888 -e /bin/bash
ls
ls attack
id attack

http://www.kler.cn/a/403346.html

相关文章：

  • css:感觉稍微高级一点的布局
  • Python设计模式详解之1 —— 单例模式
  • 鸿蒙多线程开发——线程间数据通信对象01
  • Altenergy电力系统控制软件 status_zigbee SQL注入漏洞复现(CVE-2024-11305)
  • 连接数据库：通过链和代理查询鲜花信息
  • 单细胞转录组学在植物系统和合成生物学中的应用进展-文献精读83
  • 腾讯：将LLM排序能力迁移至BERT
  • cesium for unity的使用
  • Flink整合Hudi及使用
  • 视频修复技术和实时在线处理
  • 用Python爬虫“偷窥”1688搜索词推荐：一场数据的奇妙冒险
  • 国内几大网络安全公司介绍 - 网络安全
  • 聊一聊Elasticsearch的索引分片的恢复机制
  • C#无符号整数类型详解：声明、使用及注意事项
  • Android：时间选择器（最下面有效果图）
  • 【设计模式】【创建型模式（Creational Patterns）】之单例模式
  • 实现两个表格的数据传递（类似于穿梭框）
  • 代码随想录---八股文训练营Day40（总结）
  • 【Unity/Animator动画系统】多层动画状态机实现角色的基本移动
  • 散户持股增厚工具：智能T0算法交易
  • ProtonBase × Data for AI Meetup·杭州站
  • 深度学习：神经网络中线性层的使用
  • 网络协议之邮件协议（SMTP、POP3与IMAP）
  • 路由基础（全）
  • WPF Prism框架
  • WebGL进阶（七）深度缓冲区