ESP32S3N16R8驱动ST7701S屏幕（vscode+PlatfoemIO）
1.开发板配置
本人开发板使用ESP32S3-wroom1-n16r8最小系统板
由于基于vscode与PlatformIO框架开发，无espidf框架，因此无法直接烧录程序，配置开发板参数如下：
在platformio.ini文件中，配置使用esp32-s3-devkitc-1开发板型号，自行指定flash和psram运行模式，启用psram并指定大小，开启串口调试即可
[env:esp32s3_wroom]
platform = espressif32
board = esp32-s3-devkitc-1 ; 使用N16版本的板型
framework = arduino
board_build.arduino.partitions = default_16MB.csv
; 指定FLASH和PSRAM的运行模式
board_build.arduino.memory_type = qio_opi
; 指定FLASH容量为16MB
board_upload.flash_size = 16MB
upload_speed = 921600
upload_port = COM17 ; 根据实际端口修改
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM ; 启用PSRAM
-DPSRAM_SIZE=8 ; 指定8MB PSRAM
-DARDUINO_USB_MODE=1 ；开启串口调试
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_RUNNING_CORE=1
-DARDUINO_EVENT_RUNNING_CORE=1
lib_deps =
bodmer/TFT_eSPI@^2.5.43
moononournation/GFX Library for Arduino@^1.5.4主要博文：VS Code+platformio配置ESP32-S3-N16R8（8MB PSRAM + 16MB FLASH）工程 - Macrored - 博客园
2.安装GFX显示屏库
直接搜索gfx下滑即可，选择加入到工程文件中
之后选择自己的工程文件夹添加即可
3.修改配置文件
打开该目录，基于个人开发板可能文件目录不同，将PDQ文件夹下所有h文件复制到主文件夹下（main.cpp同级目录）
4.之后修改其中两个文件，开启esp32s3 rgb配置
5.修改配置引脚
在第四步同一文件夹下，修改配置spi引脚
之后根据自身显示屏尺寸外形，选择对应rgb引脚配置函数，我使用的为2寸方形屏幕，因此使用option4
之后根据实际硬件接线，修改该函数下引脚配置
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,
10 /* R0 */, 9 /* R1 */, 8 /* R2 */, 7 /* R3 */, 6 /* R4 */,
5 /* G0 */, 4 /* G1 */, 3 /* G2 */, 2 /* G3 */, 1 /* G4 */, 17 /* G5 */,
40 /* B0 */, 39 /* B1 */, 38 /* B2 */, 47 /* B3 */, 45 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 640 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type11_init_operations, sizeof(st7701_type11_init_operations));
| 屏幕引脚序号 | 屏幕引脚定义 | esp32s3引脚序号 |
| 1 | leda | 3.3引脚可拉高 |
| 2 | ledk | gnd |
| 3 | vcc | 3.3拉高 |
| 4 | gng | gnd |
| 5 | gng | gnd |
| 6 | gng | gnd |
| 7 | gng | gnd |
| 8 | gng | gnd |
| 9 | gng | gnd |
| 10 | gng | gnd |
| 11 | gng | gnd |
| 12 | gng | gnd |
| 13 | gng | gnd |
| 14 | vs | 12 |
| 15 | hs | 11 |
| 16 | pclk | 14 |
| 17 | de | 13 |
| 18 | b0 | 40 |
| 19 | b1 | 39 |
| 20 | b2 | 38 |
| 21 | b3 | 47 |
| 22 | b4 | 45 |
| 23 | g0 | 5 |
| 24 | g1 | 4 |
| 25 | g2 | 3 |
| 26 | g3 | 2 |
| 27 | g4 | 1 |
| 28 | g5 | 17 |
| 29 | r0 | 10 |
| 30 | r1 | 9 |
| 31 | r2 | 8 |
| 32 | r3 | 7 |
| 33 | r4 | 6 |
| 34 | rest | 46（屏幕初始化）19引脚不可用 |
| 35 | cs | 15 |
| 36 | scl | 16 |
| 37 | sda | 21 |
| 38 | gnd | gnd |
| 39 | vcc | 3.3拉高 |
| 3.3拉高引脚 | 20 19 18 |
此时特别注意屏幕中RESET引脚，后续修改屏幕底层驱动时，不同厂家屏幕，屏幕底层驱动初始化需要RESET引脚电平触发。
6.修改屏幕分辨率
根据自身购买屏幕分辨率，修改对应参数
7.修改屏幕初始化函数（需要商家提供资料）
打开屏幕初始化函数
根据自身屏幕驱动资料，修改对应寄存器配置内容（该函数中不可调用延时等函数，用宏定义即可），商家屏幕部分驱动资料：
RST即为屏幕的RESET引脚，如需配置电平初始化，在屏幕启动函数之前单独配置电平即可，延时函数推荐使用微秒级延时函数。
之后根据商家资料，更改每个指令中寄存器配置内容，注意com与dat不同函数区别。
main.cpp中，step函数配置RESET引脚即可
8.配置主函数
主函数中配置对应指令，烧录程序即可。
9.注意事项
1.打开开发板的PSRAM功能并配置
2.如果出现竖状彩色条纹花屏，检查以下配置内容：
显示屏初始化函数 st7701_type11_init_operations
显示屏底层驱动中寄存器配置
显示屏分辨率，引脚配置
显示屏初始化引脚RESET引脚
3.注意显示屏模式rgb656还是rgb888，涉及显示屏初始化驱动函数内容修改
10.附上相关文件代码
main.cpp
#include <Arduino_GFX_Library.h>
#include <Arduino_GFX_dev_device.h>
/*
#include <Arduino_DataBus.h>
#include <Arduino_G.h>
#include <Arduino_GFX.h>
#include <Arduino_TFT.h>
#include <Arduino_TFT_18bit.h>
#include <YCbCr2RGB.h>
#include <gfxfont.h>
*/
// 使用extern声明外部变量
//extern Arduino_DataBus *bus; // 声明外部数据总线
//extern Arduino_ESP32RGBPanel *rgbpanel; // 声明外部RGB面板
//extern Arduino_RGB_Display *gfx; // 声明外部RGB显示对象
const int RESET=46; //定义屏幕复位引脚，涉及屏幕初始化
void setup() {
Serial.begin(115200);
Serial.println("ESP32-S3 启动");
Serial.println("初始化GPIO引脚...");
pinMode(20, OUTPUT);
pinMode(18, OUTPUT);
pinMode(48, OUTPUT);
digitalWrite(20, HIGH);
digitalWrite(18, HIGH);
digitalWrite(48,HIGH);
Serial.println("GPIO引脚初始化完成");
Serial.println("开始初始化显示屏...");
//显示屏初始化 RST引脚配置
pinMode(RESET, OUTPUT);
digitalWrite(RESET, HIGH);
delayMicroseconds(1000);
digitalWrite(RESET, LOW);
delayMicroseconds(5000);
digitalWrite(RESET, HIGH);
delayMicroseconds(50000);
if (!gfx->begin()) {
Serial.println("显示屏初始化失败!");
} else {
Serial.println("显示屏初始化成功!");
}
// 初始化显示
gfx->fillScreen(WHITE);
delay(1000);
}
void loop() {
gfx->fillScreen(RED);
delay(1000);
gfx->fillScreen(GREEN);
delay(1000);
gfx->fillScreen(BLUE);
delay(1000);
gfx->drawCircle(250, 250, 50, RED);
Serial.println("ok"); // 在屏幕中心画圆
delay(1000);
/* gfx->fillCircle(240, 240, 40, GREEN); // 填充圆
delay(1000);
gfx->drawRect(190, 190, 100, 100, BLUE); // 画矩形
delay(1000); */
}platformIO.ini
[env:esp32s3_wroom]
platform = espressif32
board = esp32-s3-devkitc-1 ; 使用N16版本的板型
framework = arduino
board_build.arduino.partitions = default_16MB.csv
; 指定FLASH和PSRAM的运行模式
board_build.arduino.memory_type = qio_opi
; 指定FLASH容量为16MB
board_upload.flash_size = 16MB
upload_speed = 921600
upload_port = COM17 ; 根据实际端口修改
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM ; 启用PSRAM
-DPSRAM_SIZE=8 ; 指定8MB PSRAM
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_RUNNING_CORE=1
-DARDUINO_EVENT_RUNNING_CORE=1
lib_deps =
bodmer/TFT_eSPI@^2.5.43
moononournation/GFX Library for Arduino@^1.5.4
屏幕初始化底层驱动函数（Arduino_RGB_Display.h文件中）
static const uint8_t st7701_type11_init_operations[] = {
BEGIN_WRITE,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,
WRITE_COMMAND_8, 0xEF,
WRITE_BYTES, 1, 0x08,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x10,
WRITE_C8_D16, 0xC0, 0x4F, 0x00,
WRITE_C8_D16, 0xC1, 0x11, 0x0C,
WRITE_C8_D16, 0xC2, 0x07, 0x0A,
WRITE_COMMAND_8, 0xC3,WRITE_BYTES, 3, 0x83, 0x33, 0x1B,
//
WRITE_C8_D8, 0xCC, 0x10, // changed by manufacture
WRITE_COMMAND_8, 0xB0, // Positive Voltage Gamma Control
WRITE_BYTES, 16,
0x00, 0x0F, 0x18, 0x0D,
0x12, 0x07, 0x05, 0x08,
0x07, 0x21, 0x30, 0x10,
0x0F, 0x26, 0x2F, 0x1F,
WRITE_COMMAND_8, 0xB1, // Negative Voltage Gamma Control
WRITE_BYTES, 16,
0x00, 0x1B, 0x20, 0x0C,
0x0E, 0x03, 0x08, 0x08,
0x08, 0x22, 0x05, 0x11,
0x0F, 0x2A, 0x32, 0x1F,
// PAGE1
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x11,
WRITE_C8_D8, 0xB0, 0x35, // Vop=4.7375v
WRITE_C8_D8, 0xB1, 0x52, // VCOM=32
WRITE_C8_D8, 0xB2, 0x81, // VGH=15v
WRITE_C8_D8, 0xB3, 0x80,
WRITE_C8_D8, 0xB5, 0x4E, // VGL=-10.17v
WRITE_C8_D8, 0xB7, 0x85,
WRITE_C8_D8, 0xB8, 0x21, // AVDD=6.6 & AVCL=-4.6
WRITE_C8_D8, 0xC0, 0x09,
WRITE_C8_D8, 0xC1, 0x78,
WRITE_C8_D8, 0xC2, 0x78,
WRITE_C8_D8, 0xD0, 0x88,
WRITE_COMMAND_8, 0xE0,
WRITE_BYTES, 3, 0x00, 0xA0, 0x02,
WRITE_COMMAND_8, 0xE1,
WRITE_BYTES, 11,
0x06, 0xA0, 0x08, 0xA0,
0x05, 0xA0, 0x07, 0xA0,
0x00, 0x44, 0x44,
WRITE_COMMAND_8, 0xE2,
WRITE_BYTES, 13,
0x20, 0x20, 0x40, 0x40,
0x96, 0xA0, 0x00, 0x00,
0x96, 0xA0, 0x00, 0x00,0x00,
WRITE_COMMAND_8, 0xE3,
WRITE_BYTES, 4, 0x00, 0x00, 0x22, 0x22,
WRITE_C8_D16, 0xE4, 0x44, 0x44,
WRITE_COMMAND_8, 0xE5,
WRITE_BYTES, 16,
0x0E, 0x97, 0x10, 0xA0,
0x10, 0x99, 0x10, 0xA0,
0x0A, 0x93, 0x10, 0xA0,
0x0C, 0x95, 0x10, 0xA0,
WRITE_COMMAND_8, 0xE6,
WRITE_BYTES, 4, 0x00, 0x00, 0x22, 0x22,
WRITE_C8_D16, 0xE7, 0x44, 0x44,
WRITE_COMMAND_8, 0xE8,
WRITE_BYTES, 16,
0x0D, 0x96, 0x10, 0xA0,
0x0F, 0x98, 0x10, 0xA0,
0x09, 0x92, 0x10, 0xA0,
0x0B, 0x94, 0x10, 0xA0,
WRITE_COMMAND_8, 0xEB,
WRITE_BYTES, 7,
0x00, 0x01, 0x4E, 0x4E,
0x44, 0x88, 0x40,
WRITE_C8_D16, 0xEC, 0x78, 0x00,
WRITE_COMMAND_8, 0xED,
WRITE_BYTES, 16,
0xFF, 0xFA, 0x2F, 0x89,
0x76, 0x54, 0x01, 0xFF,
0xFF, 0x10, 0x45, 0x67,
0x98, 0xF2, 0xAF, 0xFF,
//-----------VAP & VAN---------------
WRITE_COMMAND_8, 0xEF,
WRITE_BYTES, 6, 0x08, 0x08, 0x08, 0x45, 0x3F,0x54,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,
WRITE_COMMAND_8, 0xE8,
WRITE_BYTES, 8, 0x00, 0x0E, 0xFF, 0x77, 0x01, 0x00, 0x00, 0x00,
WRITE_COMMAND_8, 0x11,// Sleep Out
END_WRITE,
DELAY, 120,
BEGIN_WRITE,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,
WRITE_COMMAND_8, 0xE8,
WRITE_BYTES, 2, 0x00, 0x0C,
END_WRITE,
DELAY, 10,
BEGIN_WRITE,
WRITE_COMMAND_8, 0xE8,
WRITE_BYTES, 2, 0x00, 0x00,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x00,
WRITE_COMMAND_8, 0x3A,
WRITE_BYTES, 1, 0x55, // RGB565
// WRITE_BYTES, 1, 0x77, // RGB888
WRITE_COMMAND_8, 0x29, // Display On
WRITE_BYTES, 1, 0x00,
END_WRITE};
// Init code for 480x480 round TL021WVC02 display
static const uint8_t TL021WVC02_init_operations[] = {
BEGIN_WRITE,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x10,
WRITE_C8_D16, 0xC0, 0x3B, 0x00,
WRITE_C8_D16, 0xC1, 0x0B, 0x02, // VBP
WRITE_C8_D16, 0xC2, 0x00, 0x02,
WRITE_C8_D8, 0xCC, 0x10,
WRITE_C8_D8, 0xCD, 0x08,
WRITE_COMMAND_8, 0xB0, // Positive Voltage Gamma Control
WRITE_BYTES, 16,
0x02, 0x13, 0x1B, 0x0D,
0x10, 0x05, 0x08, 0x07,
0x07, 0x24, 0x04, 0x11,
0x0E, 0x2C, 0x33, 0x1D,
WRITE_COMMAND_8, 0xB1, // Negative Voltage Gamma Control
WRITE_BYTES, 16,
0x05, 0x13, 0x1B, 0x0D,
0x11, 0x05, 0x08, 0x07,
0x07, 0x24, 0x04, 0x11,
0x0E, 0x2C, 0x33, 0x1D,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x11,
WRITE_C8_D8, 0xB0, 0x5d, // 5d
WRITE_C8_D8, 0xB1, 0x43, // VCOM amplitude setting
WRITE_C8_D8, 0xB2, 0x81, // VGH Voltage setting, 12V
WRITE_C8_D8, 0xB3, 0x80,
WRITE_C8_D8, 0xB5, 0x43, // VGL Voltage setting, -8.3V
WRITE_C8_D8, 0xB7, 0x85,
WRITE_C8_D8, 0xB8, 0x20,
WRITE_C8_D8, 0xC1, 0x78,
WRITE_C8_D8, 0xC2, 0x78,
WRITE_C8_D8, 0xD0, 0x88,
WRITE_COMMAND_8, 0xE0,
WRITE_BYTES, 3, 0x00, 0x00, 0x02,
WRITE_COMMAND_8, 0xE1,
WRITE_BYTES, 11,
0x03, 0xA0, 0x00, 0x00,
0x04, 0xA0, 0x00, 0x00,
0x00, 0x20, 0x20,
WRITE_COMMAND_8, 0xE2,
WRITE_BYTES, 13,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00,
WRITE_COMMAND_8, 0xE3,
WRITE_BYTES, 4, 0x00, 0x00, 0x11, 0x00,
WRITE_C8_D16, 0xE4, 0x22, 0x00,
WRITE_COMMAND_8, 0xE5,
WRITE_BYTES, 16,
0x05, 0xEC, 0xA0, 0xA0,
0x07, 0xEE, 0xA0, 0xA0,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
WRITE_COMMAND_8, 0xE6,
WRITE_BYTES, 4, 0x00, 0x00, 0x11, 0x00,
WRITE_C8_D16, 0xE7, 0x22, 0x00,
WRITE_COMMAND_8, 0xE8,
WRITE_BYTES, 16,
0x06, 0xED, 0xA0, 0xA0,
0x08, 0xEF, 0xA0, 0xA0,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
WRITE_COMMAND_8, 0xEB,
WRITE_BYTES, 7,
0x00, 0x00, 0x40, 0x40,
0x00, 0x00, 0x00,
WRITE_COMMAND_8, 0xED,
WRITE_BYTES, 16,
0xFF, 0xFF, 0xFF, 0xBA,
0x0A, 0xBF, 0x45, 0xFF,
0xFF, 0x54, 0xFB, 0xA0,
0xAB, 0xFF, 0xFF, 0xFF,
WRITE_COMMAND_8, 0xEF,
WRITE_BYTES, 6,
0x10, 0x0D, 0x04, 0x08,
0x3F, 0x1F,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,
WRITE_C8_D8, 0xEF, 0x08,
WRITE_COMMAND_8, 0xFF,
WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x00,
WRITE_C8_D8, 0x36, 0x00,
WRITE_C8_D8, 0x3A, 0x60, // 0x70 RGB888, 0x60 RGB666, 0x50 RGB565
WRITE_COMMAND_8, 0x11, // Sleep Out
END_WRITE,
DELAY, 100,
BEGIN_WRITE,
WRITE_COMMAND_8, 0x29, // Display On
END_WRITE,
DELAY, 50};Arduino-GFX-dev-devich.h文件
// #define AD35_S3
// #define BLOCKCODELAB_ARCADE_LITE
// #define DLC35010R // or called "Elecrow ESP Terminal with 3.5inch Parallel RGB Capacitive Touch Display (ILI9488)"
// #define DRAGON_RADAR
// #define ESP32_1732S019
// #define ESP32_2424012
// #define ESP32_2432S028
// #define ESP32_3248S035
// #define ESP32_4827A043 /* requires manual set bus speed to 8 mHz: gfx->begin(8000000) */
// #define ESP32_4827A043_QSPI
// #define ESP32_4827S043
// #define ESP32_4848S040_86BOX_GUITION
// #define ESP32_8048S043
// #define ESP32_8048S070
// #define ESP32_LCDKIT_SPI
// #define ESP32_LCDKIT_PAR8A
// #define ESP32_LCDKIT_PAR8B
// #define ESP32_LCDKIT_PAR16
// #define ESP32_S3_313LCD
// #define ESP32_S3_BOX_3
// #define ESP32_S3_EYE
#define ESP32_S3_RGB
// #define ESP32_S3_RPI_DPI
// #define ESP32S3_2_1_TP
// #define GS_T3E // Golden Security GS-T3E
// #define IBUBLY
// #define JC1060P470
// #define JC3248W535
// #define JC3636W518
// #define LILYGO_T_DECK
// #define LILYGO_T_DECK_PLUS
// #define LILYGO_T_DISPLAY
// #define LILYGO_T_DISPLAY_S3
// #define LILYGO_T_Display_S3_AMOLED
// #define LILYGO_T_Display_S3_AMOLED_1_64
// #define LILYGO_T_Display_S3_LONG
// #define LILYGO_T_DISPLAY_S3_PRO
// #define LILYGO_T_QT
// #define LILYGO_T_RGB
// #define LILYGO_T_TRACK
// #define LILYGO_T_WATCH_2021
// #define LILYGO_T4_S3
// #define MAKERFABS_TFT_TOUCH_3_5
// #define MAKERFABS_ESP32_S3_TFT_4_0
// #define MAKERFABS_ESP32_S3_TFT_4_3_v1_3
// #define WT32_SC01
// #define XIAO_SAMD21_ROUND_DISPLAY
// #define XIAO_ESP32C3_ROUND_DISPLAY
// #define XIAO_ESP32S3_ROUND_DISPLAY
// #define WAVESHARE_ESP32_S3_LCD_2_8
// #define WAVESHARE_RP2040_LCD_0_96
// #define WZ8048C050 // or called "Elecrow Wizee-ESP32"
// #define ZX2D10GE10R_V4848
// #define ZX3D50CE02S // or called "WT32-SC01 PLUS"
// #define ZX3D95CE01S_AR
// #define ZX3D95CE01S_TR
// #define ZX7D00CE01S // or called "QM Smart Panlee 7.0 inch serial screen"
#if defined(AD35_S3)
#define GFX_DEV_DEVICE AD35_S3
#include <Wire.h>
#include <Adafruit_AW9523.h>
Adafruit_AW9523 aw;
#define DEV_DEVICE_INIT() \
{ \
Wire.begin(6 /* SDA */, 5 /* SCL */); \
aw.begin(0x59); \
aw.pinMode(8, OUTPUT); /* LCD_LEDK */ \
aw.pinMode(9, OUTPUT); /* LCD_LEDK */ \
aw.pinMode(10, OUTPUT); /* LCD_LEDK */ \
aw.pinMode(11, OUTPUT); /* LCD_LEDK */ \
aw.pinMode(14, OUTPUT); /* LCD_RST */ \
aw.digitalWrite(8, LOW); /* LCD_LEDK */ \
aw.digitalWrite(9, LOW); /* LCD_LEDK */ \
aw.digitalWrite(10, LOW); /* LCD_LEDK */ \
aw.digitalWrite(11, LOW); /* LCD_LEDK */ \
aw.digitalWrite(14, HIGH); /* LCD_RST */ \
}
Arduino_DataBus *bus = new Arduino_ESP32LCD8(
45 /* DC */, GFX_NOT_DEFINED /* CS */, 10 /* WR */, GFX_NOT_DEFINED /* RD */,
9 /* D0 */, 4 /* D1 */, 3 /* D2 */, 8 /* D3 */, 18 /* D4 */, 17 /* D5 */, 16 /* D6 */, 15 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(BLOCKCODELAB_ARCADE_LITE)
#define GFX_DEV_DEVICE BLOCKCODELAB_ARCADE_LITE
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(45 /* DC */, 10 /* CS */, 12 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, 46 /* RST */, 3 /* rotation */, false /* IPS */);
#elif defined(DLC35010R)
#define GFX_DEV_DEVICE DLC35010R
#define GFX_BL 46
Arduino_DataBus *bus = new Arduino_ESP32PAR16(
45 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, 48 /* RD */,
47 /* D0 */, 21 /* D1 */, 14 /* D2 */, 13 /* D3 */, 12 /* D4 */, 11 /* D5 */, 10 /* D6 */, 9 /* D7 */,
3 /* D8 */, 8 /* D9 */, 16 /* D10 */, 15 /* D11 */, 7 /* D12 */, 6 /* D13 */, 5 /* D14 */, 4 /* D15 */);
Arduino_GFX *gfx = new Arduino_ILI9488(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */);
#elif defined(DRAGON_RADAR)
#define GFX_DEV_DEVICE DRAGON_RADAR
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 39 /* CS */,
48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
11 /* R0 */, 12 /* R1 */, 13 /* R2 */, 45 /* R3 */, 0 /* R4 */,
8 /* G0 */, 19 /* G1 */, 20 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,
4 /* B0 */, 5 /* B1 */, 6 /* B2 */, 7 /* B3 */, 15 /* B4 */,
1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations));
#elif defined(ESP32_1732S019)
#define GFX_DEV_DEVICE ESP32_1732S019
#define GFX_BL 14
Arduino_DataBus *bus = new Arduino_ESP32SPI(11 /* DC */, 10 /* CS */, 12 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */);
#elif defined(ESP32_2424012)
#define GFX_DEV_DEVICE ESP32_2424012
#define GFX_BL 8
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 10 /* CS */, 6 /* SCK */, 7 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(ESP32_2432S028)
#define GFX_DEV_DEVICE ESP32_2432S028
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);
#elif defined(ESP32_3248S035)
#define GFX_DEV_DEVICE ESP32_3248S035
#define GFX_BL 27
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */, VSPI /* spi_num */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);
#elif defined(ESP32_4827A043)
#define GFX_DEV_DEVICE ESP32_4827A043
#define GFX_BL 2
Arduino_DataBus *bus = new Arduino_ESP32LCD16(
48 /* DC */, 45 /* CS */, 47 /* WR */, 21 /* RD */,
5 /* D0 */, 6 /* D1 */, 7 /* D2 */, 15 /* D3 */, 16 /* D4 */, 4 /* D5 */, 8 /* D6 */, 3 /* D7 */,
46 /* D8 */, 9 /* D9 */, 1 /* D10 */, 42 /* D11 */, 39 /* D12 */, 41 /* D13 */, 40 /* D14 */, 14 /* D15 */);
Arduino_GFX *gfx = new Arduino_NV3041A(bus, 17 /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(ESP32_4827A043_QSPI)
#define GFX_DEV_DEVICE ESP32_4827A043_QSPI
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
45 /* CS */, 47 /* SCK */, 21 /* D0 */, 48 /* D1 */, 40 /* D2 */, 39 /* D3 */);
Arduino_GFX *gfx = new Arduino_NV3041A(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(ESP32_4827S043)
#define GFX_DEV_DEVICE ESP32_4827S043
#define GFX_BL 2
#define RGB_PANEL
// option 1:
// Uncomment for ILI6485 LCD 480x272
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
0 /* hsync_polarity */, 1 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 43 /* hsync_back_porch */,
0 /* vsync_polarity */, 3 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 12 /* vsync_back_porch */,
1 /* pclk_active_neg */, 10000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 272 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
// option 2:
// Uncomment for ST7262 IPS LCD 800x480
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
// 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
// 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
// 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
// 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
// 0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */,
// 0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */,
// 1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
// 800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
// option 3:
// Uncomment for RPi DPI 1024x600
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
// 40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
// 45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
// 5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
// 8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
// 0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 43 /* hsync_back_porch */,
// 0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 12 /* vsync_back_porch */,
// 1 /* pclk_active_neg */, 9000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
// 1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
/* 4.0" 86BOX from GUITION ESP32-4848S040 display */
#elif defined(ESP32_4848S040_86BOX_GUITION)
#define GFX_DEV_DEVICE ESP32_4848S040_86BOX_GUITION
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 39 /* CS */,
48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
11 /* R0 */, 12 /* R1 */, 13 /* R2 */, 14 /* R3 */, 0 /* R4 */,
8 /* G0 */, 20 /* G1 */, 3 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,
4 /* B0 */, 5 /* B1 */, 6 /* B2 */, 7 /* B3 */, 15 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 1 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type9_init_operations, sizeof(st7701_type9_init_operations));
#elif defined(ESP32_8048S043)
#define GFX_DEV_DEVICE ESP32_8048S043
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */,
0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */,
1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
#elif defined(ESP32_8048S070)
#define GFX_DEV_DEVICE ESP32_8048S070
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
41 /* DE */, 40 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
14 /* R0 */, 21 /* R1 */, 47 /* R2 */, 48 /* R3 */, 45 /* R4 */,
9 /* G0 */, 46 /* G1 */, 3 /* G2 */, 8 /* G3 */, 16 /* G4 */, 1 /* G5 */,
15 /* B0 */, 7 /* B1 */, 6 /* B2 */, 5 /* B3 */, 4 /* B4 */,
0 /* hsync_polarity */, 180 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 16 /* hsync_back_porch */,
0 /* vsync_polarity */, 12 /* vsync_front_porch */, 13 /* vsync_pulse_width */, 10 /* vsync_back_porch */,
1 /* pclk_active_neg */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
#elif defined(ESP32_LCDKIT_SPI)
#define GFX_DEV_DEVICE ESP32_LCDKIT_SPI
#define GFX_BL 23
Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 5 /* CS */, 22 /* SCK */, 21 /* MOSI */, 27 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, 18 /* RST */, 1 /* rotation */);
#elif defined(ESP32_LCDKIT_PAR8A)
#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR8A
Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);
#elif defined(ESP32_LCDKIT_PAR8B)
#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR8B
Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 25 /* D0 */, 26 /* D1 */, 12 /* D2 */, 13 /* D3 */, 14 /* D4 */, 15 /* D5 */, 2 /* D6 */, 4 /* D7 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);
#elif defined(ESP32_LCDKIT_PAR16)
#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR16
Arduino_DataBus *bus = new Arduino_ESP32PAR16(
5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */,
19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */,
25 /* D8 */, 26 /* D9 */, 12 /* D10 */, 13 /* D11 */, 14 /* D12 */, 15 /* D13 */, 2 /* D14 */, 4 /* D15 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);
#elif defined(ESP32_S3_313LCD)
#define GFX_DEV_DEVICE ESP32_S3_313LCD
#define GFX_BL 4
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 0 /* CS */,
17 /* SCK */, 16 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
15 /* DE */, 5 /* VSYNC */, 6 /* HSYNC */, 7 /* PCLK */,
19 /* R0 */, 8 /* R1 */, 18 /* R2 */, 17 /* R3 */, 16 /* R4 */,
11 /* G0 */, 10 /* G1 */, 9 /* G2 */, 46 /* G3 */, 3 /* G4 */, 20 /* G5 */,
47 /* B0 */, 21 /* B1 */, 14 /* B2 */, 13 /* B3 */, 12 /* B4 */,
1 /* hsync_polarity */, 30 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
1 /* vsync_polarity */, 16 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 16 /* vsync_back_porch */,
0 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
376 /* width */, 960 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, gc9503v_type2_init_operations, sizeof(gc9503v_type2_init_operations));
#elif defined(ESP32_S3_BOX_3)
#define GFX_DEV_DEVICE ARDUINO_ESP32_S3_BOX_3
#define GFX_BL 47
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);
#elif defined(ESP32_S3_EYE)
#define GFX_DEV_DEVICE ESP32_S3_EYE
#define DEV_DEVICE_INIT() \
{ \
pinMode(3 /* camera indicator */, OUTPUT); \
digitalWrite(3 /* camera indicator */, LOW); \
pinMode(48 /* BACKLIGHT */, OUTPUT); \
digitalWrite(48 /* BACKLIGHT */, LOW); \
}
Arduino_DataBus *bus = new Arduino_ESP32SPI(43 /* DC */, 44 /* CS */, 21 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */);
#elif defined(ESP32_S3_RGB)
#define GFX_DEV_DEVICE ESP32_S3_RGB
// #define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 15 /* CS */,
16 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
// option 1:
// Uncomment for 4" rect display
//Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
// 13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,
// 10 /* R0 */, 9 /* R1 */, 8 /* R2 */, 7 /* R3 */, 6 /* R4 */,
// 5 /* G0 */, 4 /* G1 */, 3 /* G2 */, 2 /* G3 */, 1 /* G4 */, 17 /* G5 */,
// 40 /* B0 */, 39 /* B1 */, 38 /* B2 */, 47 /* B3 */, 45 /* B4 */,
// 0 /* hsync_polarity */, 80 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 80 /* hsync_back_porch */,
// 0 /* vsync_polarity */, 18 /* vsync_front_porch */, 2 /* vsync_pulse_width */, 30 /* vsync_back_porch */, 0 /* pclk_active_neg */, 6000000L /* pclk_frequency */);
//Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
// 240 /* width */, 320 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
// bus, 46 /* RST */, st7701_type10_init_operations, sizeof(st7701_type10_init_operations));
// option 2:
// Uncomment for 2.1" round display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
// 1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
// 1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
// 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
// bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations));
// option 3:
// Uncomment for 2.8" round display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
// 1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
// 1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
// 480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
// bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations));
// option 4:
// Uncomment for 2.0" display
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,
10 /* R0 */, 9 /* R1 */, 8 /* R2 */, 7 /* R3 */, 6 /* R4 */,
5 /* G0 */, 4 /* G1 */, 3 /* G2 */, 2 /* G3 */, 1 /* G4 */, 17 /* G5 */,
40 /* B0 */, 39 /* B1 */, 38 /* B2 */, 47 /* B3 */, 45 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 640 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type11_init_operations, sizeof(st7701_type11_init_operations));
// option 5:
// Uncomment for 3.5" display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
// 18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
// 4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
// 10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
// 15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
// 1 /* hsync_polarity */, 20 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 38 /* hsync_back_porch */,
// 1 /* vsync_polarity */, 4 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 15 /* vsync_back_porch */,
// 10 /* pclk_active_neg */, 16000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
// 640 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
// bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));
#elif defined(ESP32_S3_RPI_DPI)
#define GFX_DEV_DEVICE ESP32_S3_RPI_DPI
// #define GFX_BL 38
#define RGB_PANEL
// e.g. Waveshare 7" RPi DPI LCD: https://www.waveshare.com/wiki/7inch_LCD_for_Pi
// dpi_timings=1024 1 40 48 128 600 1 13 3 45 0 0 0 60 0 37000000 6
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
1 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 128 /* hsync_back_porch */,
1 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 45 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
#elif defined(ESP32S3_2_1_TP)
#define GFX_DEV_DEVICE ESP32S3_2_1_TP
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 39 /* CS */,
48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
4 /* R0 */, 5 /* R1 */, 6 /* R2 */, 7 /* R3 */, 15 /* R4 */,
8 /* G0 */, 20 /* G1 */, 3 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,
11 /* B0 */, 12 /* B1 */, 13 /* B2 */, 14 /* B3 */, 0 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations));
/* Golden Security GS-T3E */
#elif defined(GS_T3E)
#define GFX_DEV_DEVICE GS_T3E
#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 4 /* CS */,
15 /* SCK */, 48 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
40 /* DE */, 39 /* VSYNC */, 38 /* HSYNC */, 41 /* PCLK */,
8 /* R0 */, 18 /* R1 */, 17 /* R2 */, 16 /* R3 */, 0 /* R4 */,
13 /* G0 */, 12 /* G1 */, 11 /* G2 */, 10 /* G3 */, 9 /* G4 */, 3 /* G5 */,
15 /* B0 */, 48 /* B1 */, 47 /* B2 */, 21 /* B3 */, 14 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, 4 /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));
#elif defined(IBUBLY)
#define GFX_DEV_DEVICE IBUBLY
#define GFX_BL 17 // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
Arduino_DataBus *bus = new Arduino_ESP32SPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 12 /* RST */, 1 /* rotation */, true /* IPS */, 240 /* width */, 280 /* height */, 0 /* col offset 1 */, 20 /* row offset 1 */, 0 /* col offset 2 */, 20 /* row offset 2 */);
#elif defined(JC1060P470)
#define GFX_DEV_DEVICE JC1060P470
#define GFX_BL 23 // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
#define DSI_PANEL
Arduino_ESP32DSIPanel *dsipanel = new Arduino_ESP32DSIPanel(
40 /* hsync_pulse_width */, 160 /* hsync_back_porch */, 160 /* hsync_front_porch */,
10 /* vsync_pulse_width */, 23 /*vsync_back_porch */, 12 /* vsync_front_porch */,
48000000 /* prefer_speed */);
Arduino_DSI_Display *gfx = new Arduino_DSI_Display(
1024 /* width */, 600 /* height */, dsipanel, 0 /* rotation */, true /* auto_flush */,
27 /* RST */, jd9165_init_operations, sizeof(jd9165_init_operations) / sizeof(lcd_init_cmd_t));
#elif defined(JC3248W535)
#define GFX_DEV_DEVICE JC3248W535
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
45 /* CS */, 47 /* SCK */, 21 /* D0 */, 48 /* D1 */, 40 /* D2 */, 39 /* D3 */);
Arduino_GFX *g = new Arduino_AXS15231B(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */, 320 /* width */, 480 /* height */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(320 /* width */, 480 /* height */, g, 0 /* output_x */, 0 /* output_y */, 0 /* rotation */);
#elif defined(JC3636W518)
#define GFX_DEV_DEVICE JC3636W518
#define GFX_BL 15
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
10 /* CS */, 9 /* SCK */, 11 /* D0 */, 12 /* D1 */, 13 /* D2 */, 14 /* D3 */);
Arduino_GFX *gfx = new Arduino_ST77916(bus, 47 /* RST */, 0 /* rotation */, true /* IPS */, 360 /* width */, 360 /* height */);
#elif defined(LILYGO_T_DECK)
#define GFX_DEV_DEVICE LILYGO_T_DECK
#define DEV_DEVICE_INIT() \
{ \
pinMode(9 /* TDECK_RADIO_CS */, OUTPUT); \
digitalWrite(9 /* TDECK_RADIO_CS */, HIGH); \
pinMode(12 /* TDECK_LCD_CS */, OUTPUT); \
digitalWrite(12 /* TDECK_LCD_CS */, HIGH); \
pinMode(39 /* TDECK_SDCARD_CS */, OUTPUT); \
digitalWrite(39 /* TDECK_SDCARD_CS */, HIGH); \
pinMode(10 /* TDECK_PERI_POWERON */, OUTPUT); \
digitalWrite(10 /* TDECK_PERI_POWERON */, HIGH); \
delay(500); \
}
#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_HWSPI(11 /* DC */, 12 /* CS */, 40 /* SCK */, 41 /* MOSI */, 38 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);
#elif defined(LILYGO_T_DECK_PLUS)
#define GFX_DEV_DEVICE LILYGO_T_DECK_PLUS
#define DEV_DEVICE_INIT() \
{ \
pinMode(9 /* TDECK_RADIO_CS */, OUTPUT); \
digitalWrite(9 /* TDECK_RADIO_CS */, HIGH); \
pinMode(12 /* TDECK_LCD_CS */, OUTPUT); \
digitalWrite(12 /* TDECK_LCD_CS */, HIGH); \
pinMode(39 /* TDECK_SDCARD_CS */, OUTPUT); \
digitalWrite(39 /* TDECK_SDCARD_CS */, HIGH); \
pinMode(10 /* TDECK_PERI_POWERON */, OUTPUT); \
digitalWrite(10 /* TDECK_PERI_POWERON */, HIGH); \
delay(500); \
}
#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_HWSPI(11 /* DC */, 12 /* CS */, 40 /* SCK */, 41 /* MOSI */, 38 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);
#elif defined(LILYGO_T_DISPLAY)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY
#define GFX_BL 4
Arduino_DataBus *bus = new Arduino_ESP32SPI(16 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 23 /* RST */, 0 /* rotation */, true /* IPS */, 135 /* width */, 240 /* height */, 52 /* col offset 1 */, 40 /* row offset 1 */, 53 /* col offset 2 */, 40 /* row offset 2 */);
#elif defined(LILYGO_T_DISPLAY_S3)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3
#define DEV_DEVICE_INIT() \
{ \
pinMode(15 /* PWD */, OUTPUT); \
digitalWrite(15 /* PWD */, HIGH); \
}
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_ESP32PAR8Q(
7 /* DC */, 6 /* CS */, 8 /* WR */, 9 /* RD */,
39 /* D0 */, 40 /* D1 */, 41 /* D2 */, 42 /* D3 */, 45 /* D4 */, 46 /* D5 */, 47 /* D6 */, 48 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 5 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */);
#elif defined(LILYGO_T_Display_S3_AMOLED)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_AMOLED
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
6 /* CS */, 47 /* SCK */, 18 /* D0 */, 7 /* D1 */, 48 /* D2 */, 5 /* D3 */);
Arduino_GFX *gfx = new Arduino_RM67162(bus, 17 /* RST */, 0 /* rotation */);
#elif defined(LILYGO_T_Display_S3_AMOLED_1_64)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_AMOLED_1_64
#define DEV_DEVICE_INIT() \
{ \
pinMode(16 /* LCD_EN */, OUTPUT); \
digitalWrite(16 /* LCD_EN */, HIGH); \
}
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
10 /* CS */, 12 /* SCK */, 11 /* D0 */, 13 /* D1 */, 14 /* D2 */, 15 /* D3 */);
Arduino_GFX *g = new Arduino_CO5300(bus, 17 /* RST */, 0 /* rotation */, false /* IPS */, 280, 456,
20 /* col offset 1 */, 0 /* row offset 1 */, 180 /* col_offset2 */, 24 /* row_offset2 */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(280 /* width */, 456 /* height */, g, 0 /* output_x */, 0 /* output_y */, 0 /* rotation */);
#elif defined(LILYGO_T_Display_S3_LONG)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_LONG
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
12 /* CS */, 17 /* SCK */, 13 /* D0 */, 18 /* D1 */, 21 /* D2 */, 14 /* D3 */);
Arduino_GFX *g = new Arduino_AXS15231B(bus, 47 /* RST */, 0 /* rotation */, false /* IPS */, 180 /* width */, 640 /* height */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(180 /* width */, 640 /* height */, g, 0 /* output_x */, 0 /* output_y */, 0 /* rotation */);
#elif defined(LILYGO_T_DISPLAY_S3_PRO)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_PRO
#define GFX_BL 48
Arduino_DataBus *bus = new Arduino_ESP32SPI(9 /* DC */, 39 /* CS */, 18 /* SCK */, 17 /* MOSI */, 8 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 47 /* RST */, 0 /* rotation */, true /* IPS */, 222 /* width */, 480 /* height */, 49 /* col offset 1 */, 0 /* row offset 1 */, 49 /* col offset 2 */, 0 /* row offset 2 */);
#elif defined(LILYGO_T_QT)
#define GFX_DEV_DEVICE LILYGO_T_QT
#define DEV_DEVICE_INIT() \
{ \
pinMode(10 /* BL */, OUTPUT); \
digitalWrite(10 /* BL */, LOW); \
}
Arduino_DataBus *bus = new Arduino_ESP32SPI(6 /* DC */, 5 /* CS */, 3 /* SCK */, 2 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9107(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(LILYGO_T_RGB)
#define GFX_DEV_DEVICE LILYGO_T_RGB
#include <Wire.h>
#define DEV_DEVICE_INIT() \
{ \
Wire.begin(8 /* SDA */, 48 /* SCL */, 800000L /* speed */); \
}
#define GFX_BL 46
Arduino_DataBus *bus = new Arduino_XL9535SWSPI(
8 /* SDA */, 48 /* SCL */, 2 /* XL PWD */, 3 /* XL CS */, 5 /* XL SCK */, 4 /* XL MOSI */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
45 /* DE */, 41 /* VSYNC */, 47 /* HSYNC */, 42 /* PCLK */,
21 /* R0 */, 18 /* R1 */, 17 /* R2 */, 16 /* R3 */, 15 /* R4 */,
14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 10 /* G4 */, 9 /* G5 */,
7 /* B0 */, 6 /* B1 */, 5 /* B2 */, 3 /* B3 */, 2 /* B4 */,
1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */,
1 /* pclk_active_neg */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type4_init_operations, sizeof(st7701_type4_init_operations));
#elif defined(LILYGO_T_TRACK)
#define GFX_DEV_DEVICE LILYGO_T_TRACK
#define DEV_DEVICE_INIT() \
{ \
pinMode(4 /* POWER */, OUTPUT); \
digitalWrite(4 /* POWER */, HIGH); \
}
Arduino_DataBus *bus = new Arduino_ESP32SPIDMA(7 /* DC */, 9 /* CS */, 5 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_G *g = new Arduino_JD9613(bus, 8 /* RST */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(126 /* width */, 294 /* height */, g, 0, 0, 3);
#elif defined(LILYGO_T_WATCH_2021)
#define GFX_DEV_DEVICE LILYGO_T_WATCH_2021
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 27 /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(LILYGO_T4_S3)
#define GFX_DEV_DEVICE LILYGO_T4_S3
#define DEV_DEVICE_INIT() \
{ \
pinMode(9 /* POWER */, OUTPUT); \
digitalWrite(9 /* POWER */, HIGH); \
}
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
11 /* CS */, 15 /* SCK */, 14 /* D0 */, 10 /* D1 */, 16 /* D2 */, 12 /* D3 */);
Arduino_GFX *g = new Arduino_RM690B0(bus, 13 /* RST */, 0 /* rotation */, 450 /* width */, 600 /* height */, 16 /* col offset 1 */, 0 /* row offset 1 */, 16 /* col offset 2 */, 0 /* row offset 2 */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(450 /* width */, 600 /* height */, g);
#elif defined(MAKERFABS_TFT_TOUCH_3_5)
#define GFX_DEV_DEVICE MAKERFABS_TFT_TOUCH_3_5
Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9488_18bit(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);
#elif defined(MAKERFABS_ESP32_S3_TFT_4_0)
#define GFX_DEV_DEVICE MAKERFABS_ESP32_S3_TFT_4_0
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 1 /* CS */,
12 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
45 /* DE */, 4 /* VSYNC */, 5 /* HSYNC */, 21 /* PCLK */,
39 /* R0 */, 40 /* R1 */, 41 /* R2 */, 42 /* R3 */, 2 /* R4 */,
0 /* G0 */, 9 /* G1 */, 14 /* G2 */, 47 /* G3 */, 48 /* G4 */, 3 /* G5 */,
6 /* B0 */, 7 /* B1 */, 15 /* B2 */, 16 /* B3 */, 8 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));
#elif defined(MAKERFABS_ESP32_S3_TFT_4_3_v1_3)
#define GFX_DEV_DEVICE MAKERFABS_ESP32_S3_TFT_4_3_v1_3
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
0 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 88 /* hsync_back_porch */,
0 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 32 /* vsync_back_porch */,
1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
#elif defined(WT32_SC01)
#define GFX_DEV_DEVICE WT32_SC01
#define GFX_BL 23
Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 22 /* RST */, 3 /* rotation */);
#elif defined(WZ8048C050)
#define GFX_DEV_DEVICE WZ8048C050
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 0 /* PCLK */,
45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 43 /* hsync_back_porch */,
0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 12 /* vsync_back_porch */,
1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
#elif defined(WAVESHARE_ESP32_S3_LCD_2_8)
#define GFX_DEV_DEVICE WAVESHARE_ESP32_S3_LCD_2_8
#define GFX_BL 5
Arduino_DataBus *bus = new Arduino_HWSPI(41 /* DC */, 42 /* CS */, 40 /* SCK */, 45 /* MOSI */, 46 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 39 /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(WAVESHARE_RP2040_LCD_0_96)
#define GFX_DEV_DEVICE WAVESHARE_RP2040_LCD_0_96
#define GFX_BL 25
Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */, spi1 /* spi */);
Arduino_GFX *gfx = new Arduino_ST7735(bus, 12 /* RST */, 0 /* rotation */, true /* IPS */, 80 /* width */, 160 /* height */, 26 /* col offset 1 */, 1 /* row offset 1 */, 26 /* col offset 2 */, 1 /* row offset 2 */);
#elif defined(XIAO_SAMD21_ROUND_DISPLAY)
#define GFX_DEV_DEVICE XIAO_SAMD21_ROUND_DISPLAY
Arduino_DataBus *bus = new Arduino_HWSPI(3 /* DC */, 1 /* CS */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(XIAO_ESP32C3_ROUND_DISPLAY)
#define GFX_DEV_DEVICE XIAO_ESP32C3_ROUND_DISPLAY
Arduino_DataBus *bus = new Arduino_ESP32SPI(5 /* DC */, 3 /* CS */, 8 /* SCK */, 10 /* MOSI */, 9 /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(XIAO_ESP32S3_ROUND_DISPLAY)
#define GFX_DEV_DEVICE XIAO_ESP32S3_ROUND_DISPLAY
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 2 /* CS */, 7 /* SCK */, 9 /* MOSI */, 8 /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(ZX2D10GE10R_V4848)
#define GFX_DEV_DEVICE ZX2D10GE10R_V4848
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 21 /* CS */,
47 /* SCK */, 41 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
39 /* DE */, 48 /* VSYNC */, 40 /* HSYNC */, 45 /* PCLK */,
10 /* R0 */, 16 /* R1 */, 9 /* R2 */, 15 /* R3 */, 46 /* R4 */,
8 /* G0 */, 13 /* G1 */, 18 /* G2 */, 12 /* G3 */, 11 /* G4 */, 17 /* G5 */,
47 /* B0 */, 41 /* B1 */, 0 /* B2 */, 42 /* B3 */, 14 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 10 /* hsync_back_porch */,
1 /* vsync_polarity */, 14 /* vsync_front_porch */, 2 /* vsync_pulse_width */, 12 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, st7701_type7_init_operations, sizeof(st7701_type7_init_operations));
#elif defined(ZX3D50CE02S)
#define GFX_DEV_DEVICE ZX3D50CE02S
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_ESP32LCD8(
0 /* DC */, GFX_NOT_DEFINED /* CS */, 47 /* WR */, GFX_NOT_DEFINED /* RD */,
9 /* D0 */, 46 /* D1 */, 3 /* D2 */, 8 /* D3 */, 18 /* D4 */, 17 /* D5 */, 16 /* D6 */, 15 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 4 /* RST */, 0 /* rotation */, true /* IPS */);
#elif defined(ZX3D95CE01S_AR)
#define GFX_DEV_DEVICE ZX3D95CE01S_AR
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 0 /* CS */,
10 /* SCK */, 9 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,
2 /* R0 */, 17 /* R1 */, 16 /* R2 */, 1 /* R3 */, 15 /* R4 */,
41 /* G0 */, 46 /* G1 */, 3 /* G2 */, 42 /* G3 */, 8 /* G4 */, 18 /* G5 */,
10 /* B0 */, 9 /* B1 */, 40 /* B2 */, 20 /* B3 */, 19 /* B4 */,
1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, GFX_NOT_DEFINED /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations));
#elif defined(ZX3D95CE01S_TR)
#define GFX_DEV_DEVICE ZX3D95CE01S_TR
#define GFX_BL 5
Arduino_DataBus *bus = new Arduino_SWSPI(
GFX_NOT_DEFINED /* DC */, 38 /* CS */,
45 /* SCK or SCLK */, 48 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
40 /* DE */, 41 /* VSYNC */, 42 /* HSYNC */, 39 /* PCLK */,
18 /* R0 */, 8 /* R1 */, 3 /* R2 */, 46 /* R3 */, 10 /* R4 */,
14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 16 /* G4 */, 17 /* G5 */,
45 /* B0 */, 48 /* B1 */, 47 /* B2 */, 0 /* B3 */, 21 /* B4 */,
1 /* hsync_polarity */, 8 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
1 /* vsync_polarity */, 8 /* vsync_front_porch */, 10 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
bus, 41 /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations));
#elif defined(ZX7D00CE01S)
#define GFX_DEV_DEVICE ZX7D00CE01S
#define GFX_BL 45
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
39 /* DE */, 38 /* VSYNC */, 5 /* HSYNC */, 9 /* PCLK */,
10 /* R0 */, 11 /* R1 */, 12 /* R2 */, 13 /* R3 */, 14 /* R4 */,
21 /* G0 */, 0 /* G1 */, 46 /* G2 */, 3 /* G3 */, 8 /* G4 */, 18 /* G5 */,
17 /* B0 */, 16 /* B1 */, 15 /* B2 */, 7 /* B3 */, 6 /* B4 */,
0 /* hsync_polarity */, 0 /* hsync_front_porch */, 210 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
0 /* vsync_polarity */, 0 /* vsync_front_porch */, 22 /* vsync_pulse_width */, 13 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
/* Wio Terminal */
#elif defined(ARDUINO_ARCH_SAMD) && defined(SEEED_GROVE_UI_WIRELESS)
#define GFX_DEV_DEVICE WIO_TERMINAL
// #define GFX_BL LCD_BACKLIGHT
Arduino_DataBus *bus = new Arduino_HWSPI(LCD_DC /* DC */, LCD_SS_PIN /* CS */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);
/* ESP32-S3-BOX */
#elif defined(ARDUINO_ESP32_S3_BOX)
#define GFX_DEV_DEVICE ARDUINO_ESP32_S3_BOX
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, 0 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, 48 /* RST */, 0 /* rotation */);
/* M5Stack */
#elif defined(ARDUINO_M5Stack_Core_ESP32) || defined(ARDUINO_M5STACK_FIRE)
#define GFX_DEV_DEVICE ARDUINO_M5Stack_Core_ESP32
// #define GFX_BL 32
Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 14 /* CS */, SCK, MOSI, MISO);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, 33 /* RST */, 2 /* rotation */);
#elif defined(ARDUINO_M5Stack_ATOMS3)
#define GFX_DEV_DEVICE ARDUINO_M5Stack_ATOMS3
#define GFX_BL 16
Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 17 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9107(bus, 34 /* RST */, 0 /* rotation */, true /* IPS */);
/* Odroid-Go */
#elif defined(ARDUINO_ODROID_ESP32)
#define GFX_DEV_DEVICE ARDUINO_ODROID_ESP32
// #define GFX_BL 14
Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 5 /* CS */, SCK, MOSI, MISO);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */);
// Arduino_ST7789 *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */, true /* IPS */);
/* LILYGO T-Watch */
#elif defined(ARDUINO_T) || defined(ARDUINO_TWATCH_BASE) || defined(ARDUINO_TWATCH_2020_V1) || defined(ARDUINO_TWATCH_2020_V2)
#define GFX_DEV_DEVICE ARDUINO_T_WATCH
#define GFX_BL 12
Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */);
/* Waveshare RP2040-LCD-1.28 */
#elif defined(ARDUINO_WAVESHARE_RP2040_LCD_1_28)
#define GFX_DEV_DEVICE ARDUINO_WAVESHARE_RP2040_LCD_1_28
#define GFX_BL 25
Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, 12 /* MISO */, spi1 /* spi */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 12 /* RST */, 0 /* rotation */, true /* IPS */);
#endif