当前位置：首页 > article >正文

LINUX离线安装Milvus

article 2024/11/15 9:47:15

一.下载安装包

离线安装Docker需要你提前下载Docker的安装包，并将其传输到目标机器上进行安装。以下是一个基于Linux系统的离线安装Docker的简要步骤和示例：

从有网络的机器上下载Docker安装包。

将下载的安装包拷贝到离线的服务器上。

在离线的服务器上安装Docker。

下载Docker安装包：

要在本地进行打包镜像上传到服务器上

docker pull milvusdb/milvus:v2.4.14

docker save -o milvus.tar milvusdb/milvus:v2.4.14

docker load -i milvus.tar

将安装包拷贝到离线服务器：

二. Milvus -standalone部署

wget https://raw.githubusercontent.com/milvus-io/milvus/master/scripts/standalone_embed.sh

注意：如下载过慢请在docker下的daemon.json中添加镜像源

#!/usr/bin/env bash

# Licensed to the LF AI & Data foundation under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

run_embed() {
    cat << EOF > embedEtcd.yaml
listen-client-urls: http://0.0.0.0:2379
advertise-client-urls: http://0.0.0.0:2379
quota-backend-bytes: 4294967296
auto-compaction-mode: revision
auto-compaction-retention: '1000'
EOF

    cat << EOF > user.yaml
# Extra config to override default milvus.yaml
EOF

    sudo docker run -d \
        --name milvus-standalone \
        --security-opt seccomp:unconfined \
        -e ETCD_USE_EMBED=true \
        -e ETCD_DATA_DIR=/var/lib/milvus/etcd \
        -e ETCD_CONFIG_PATH=/milvus/configs/embedEtcd.yaml \
        -e COMMON_STORAGETYPE=local \
        -v $(pwd)/volumes/milvus:/var/lib/milvus \
        -v $(pwd)/embedEtcd.yaml:/milvus/configs/embedEtcd.yaml \
        -v $(pwd)/user.yaml:/milvus/configs/user.yaml \
        -p 19530:19530 \
        -p 9091:9091 \
        -p 2379:2379 \
        --health-cmd="curl -f http://localhost:9091/healthz" \
        --health-interval=30s \
        --health-start-period=90s \
        --health-timeout=20s \
        --health-retries=3 \
        milvusdb/milvus:v2.4.14 \
        milvus run standalone  1> /dev/null
}

wait_for_milvus_running() {
    echo "Wait for Milvus Starting..."
    while true
    do
        res=`sudo docker ps|grep milvus-standalone|grep healthy|wc -l`
        if [ $res -eq 1 ]
        then
            echo "Start successfully."
            echo "To change the default Milvus configuration, add your settings to the user.yaml file and then restart the service."
            break
        fi
        sleep 1
    done
}

start() {
    res=`sudo docker ps|grep milvus-standalone|grep healthy|wc -l`
    if [ $res -eq 1 ]
    then
        echo "Milvus is running."
        exit 0
    fi

    res=`sudo docker ps -a|grep milvus-standalone|wc -l`
    if [ $res -eq 1 ]
    then
        sudo docker start milvus-standalone 1> /dev/null
    else
        run_embed
    fi

    if [ $? -ne 0 ]
    then
        echo "Start failed."
        exit 1
    fi

    wait_for_milvus_running
}

stop() {
    sudo docker stop milvus-standalone 1> /dev/null

    if [ $? -ne 0 ]
    then
        echo "Stop failed."
        exit 1
    fi
    echo "Stop successfully."

}

delete_container() {
    res=`sudo docker ps|grep milvus-standalone|wc -l`
    if [ $res -eq 1 ]
    then
        echo "Please stop Milvus service before delete."
        exit 1
    fi
    sudo docker rm milvus-standalone 1> /dev/null
    if [ $? -ne 0 ]
    then
        echo "Delete milvus container failed."
        exit 1
    fi
    echo "Delete milvus container successfully."
}

delete() {
    delete_container
    sudo rm -rf $(pwd)/volumes
    sudo rm -rf $(pwd)/embedEtcd.yaml
    sudo rm -rf $(pwd)/user.yaml
    echo "Delete successfully."
}

upgrade() {
    read -p "Please confirm if you'd like to proceed with the upgrade. The default will be to the latest version. Confirm with 'y' for yes or 'n' for no. > " check
    if [ "$check" == "y" ] ||[ "$check" == "Y" ];then
        res=`sudo docker ps -a|grep milvus-standalone|wc -l`
        if [ $res -eq 1 ]
        then
            stop
            delete_container
        fi

        curl -sfL https://raw.githubusercontent.com/milvus-io/milvus/master/scripts/standalone_embed.sh -o standalone_embed_latest.sh && \
        bash standalone_embed_latest.sh start 1> /dev/null && \
        echo "Upgrade successfully."
    else
        echo "Exit upgrade"
        exit 0
    fi
}

case $1 in
    restart)
        stop
        start
        ;;
    start)
        start
        ;;
    stop)
        stop
        ;;
    upgrade)
        upgrade
        ;;
    delete)
        delete
        ;;
    *)
        echo "please use bash standalone_embed.sh restart|start|stop|upgrade|delete"
        ;;
esac

下载完成后执行 ./standalone_embed.sh start 等待安装成功安装attu 进行测试

要在本地进行打包镜像上传到服务器上

docker pull milvusdb/milvus:v2.4.14

docker save -o milvus.tar milvusdb/milvus:v2.4.14

docker load -i milvus.tar

然后执行 ./standalone_embed.sh start

检查是否运行 docker ps