当前位置: 首页 > article >正文

FPGA——DDR3的IP核

FPGA——DDR3的ip核

  • IP核配置
  • 基于MIG核代码
  • 基于AXI接口的DDR3

IP核配置

1
在这里插入图片描述
在这里插入图片描述
2
在这里插入图片描述
3
在这里插入图片描述

4
在这里插入图片描述

5
在这里插入图片描述
6
在这里插入图片描述

基于MIG核代码

控制MIG核的信号进行读写

module MIG_APP_Drive(
    input               i_ui_clk            ,
    input               i_ui_rst            ,
    input			    init_calib_complete ,
    output [28:0]		app_addr            ,    
    output [2 :0]		app_cmd             ,                        
    output				app_en              ,                    
    output [255:0]		app_wdf_data        ,                    
    output				app_wdf_end         ,                    
    output				app_wdf_wren        ,                
    input  [255:0]		app_rd_data         ,                    
    input			    app_rd_data_end     ,                        
    input			    app_rd_data_valid   ,                    
    input			    app_rdy             ,                    
    input			    app_wdf_rdy         ,                
    output [31:0]		app_wdf_mask        ,    

    input  [1 :0]       i_operation_cmd     ,
    input  [15:0]       i_operation_len     ,
    input  [28:0]       i_operation_addr    ,
    input               i_operation_valid   ,
    output              o_operation_ready   ,
    input  [255:0]      i_write_data        ,
    input               i_write_last        ,
    input               i_write_valid       ,
    output [255:0]      o_read_data         ,
    output              o_read_valid                     
);

/***************function**************/

/***************parameter*************/
localparam              P_ST_INIT       =   0   ,
                        P_ST_IDLE       =   1   ,
                        P_ST_WAIT       =   2   ,
                        P_ST_WRITE      =   3   ,
                        P_ST_READ       =   4   ,
                        P_ST_READ_WAIT  =   5   ;

/***************port******************/             

/***************mechine***************/
(* mark_debug = "true" *)reg  [7 :0]             r_st_current        ;
reg  [7 :0]             r_st_next           ;
reg  [15:0]             r_st_cnt            ;

/***************reg*******************/
reg  [28:0]		        ro_app_addr         ;
reg  [2 :0]		        ro_app_cmd          ;
reg  				    ro_app_en           ;
reg  				    ro_app_wdf_wren     ;
reg  [31:0]             ro_app_wdf_mask     ;
reg                     ro_operation_ready  ;
reg  [255:0]            ro_read_data        ;
reg                     ro_read_valid       ;
reg  [1 :0]             ri_operation_cmd    ;
reg  [15:0]             ri_operation_len    ;
reg  [28:0]             ri_operation_addr   ;
reg                     r_op_act            ;
reg  [15:0]             r_write_cnt         ;
reg  [15:0]             r_read_cnt          ;
(* mark_debug = "true" *)reg  [15:0]             r_read_data_cnt     ;
reg  [7 :0]             r_init              ;

/***************wire******************/
wire                    w_op_act            ;
wire [255:0]            w_write_fifo_dout   ;
wire                    w_write_fifo_empty  ;
wire                    w_write_fifo_full   ;
wire                    w_mig_wvalid        ;
wire                    w_mig_rvalid        ;
wire                    w_write_fifo_rd_en  ;

/***************component*************/
FIFO_256X512 FIFO_256X512_U0 (
  .clk                  (i_ui_clk           ),      // input wire clk
  .din                  (i_write_data       ),      // input wire [63 : 0] din
  .wr_en                (i_write_valid      ),  // input wire wr_en
  .rd_en                (w_write_fifo_rd_en ),  // input wire rd_en
  .dout                 (w_write_fifo_dout  ),    // output wire [63 : 0] dout
  .full                 (w_write_fifo_full  ),    // output wire full
  .empty                (w_write_fifo_empty )  // output wire empty
);
/***************assign****************/
assign app_addr             = ro_app_addr           ;
assign app_cmd              = ro_app_cmd            ;
assign app_en               = ro_app_en & app_rdy   ;
assign app_wdf_data         = w_write_fifo_dout     ;
assign app_wdf_end          = app_wdf_wren          ; 
assign app_wdf_wren         = ro_app_wdf_wren & app_rdy & app_wdf_rdy;
assign app_wdf_mask         = ro_app_wdf_mask       ;
assign o_operation_ready    = ro_operation_ready    ;
assign o_read_data          = ro_read_data          ;
assign o_read_valid         = ro_read_valid         ;
assign w_op_act             = i_operation_valid & o_operation_ready;
assign w_mig_wvalid         = app_rdy & app_wdf_rdy & app_en & ro_app_wdf_wren & app_cmd == 0;
assign w_write_fifo_rd_en   = w_mig_wvalid          ;
assign w_mig_rvalid         = app_rdy & app_en & app_cmd == 1;


/***************always****************/
always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        r_st_current <= P_ST_INIT;
    else 
        r_st_current <= r_st_next;
end

always@(*)
begin
    case(r_st_current)
        P_ST_INIT       : r_st_next = &r_init   ? P_ST_IDLE     : P_ST_INIT;
        P_ST_IDLE       : r_st_next = r_op_act  ?
                                      ri_operation_cmd == 0 ? P_ST_WAIT     : P_ST_READ
                                      : P_ST_IDLE ;
        P_ST_WAIT       : r_st_next = r_st_cnt    == 4                          ? P_ST_WRITE    : P_ST_WAIT         ;
        P_ST_WRITE      : r_st_next = r_write_cnt == ri_operation_len - 1 & w_mig_wvalid    ? P_ST_IDLE     : P_ST_WRITE        ;
        P_ST_READ       : r_st_next = r_read_cnt  == ri_operation_len - 2 & w_mig_rvalid    ? P_ST_READ_WAIT: P_ST_READ         ;
        P_ST_READ_WAIT  : r_st_next = r_read_data_cnt >= ri_operation_len - 2 & app_rd_data_valid ? P_ST_IDLE     : P_ST_READ_WAIT    ;
        default         : r_st_next = P_ST_INIT;
    endcase
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        r_init <= 'd0;
    else
        r_init <= {r_init[6 :0],init_calib_complete};
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        r_st_cnt <= 'd0;
    else if(r_st_current != r_st_next)
        r_st_cnt <= 'd0;
    else 
        r_st_cnt <= r_st_cnt  + 1;
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst) begin
        ri_operation_cmd  <= 'd0;
        ri_operation_len  <= 'd0;
        ri_operation_addr <= 'd0;
    end else if(w_op_act) begin
        ri_operation_cmd  <= i_operation_cmd ;
        ri_operation_len  <= i_operation_len ;
        ri_operation_addr <= i_operation_addr;
    end else begin
        ri_operation_cmd  <= ri_operation_cmd ;
        ri_operation_len  <= ri_operation_len ;
        ri_operation_addr <= ri_operation_addr;
    end

end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        r_op_act <= 'd0;
    else 
        r_op_act <= w_op_act;
end
 
always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst) begin
        ro_app_cmd <= 'd0;
        ro_app_en  <= 'd0;
    end else if(r_st_current == P_ST_WRITE) begin
        ro_app_cmd <= 'd0;
        ro_app_en  <= 'd1;
    end else if(r_st_current == P_ST_READ) begin
        ro_app_cmd <= 'd1;
        ro_app_en  <= 'd1;
    end else begin
        ro_app_cmd <= 'd0;
        ro_app_en  <= 'd0;
    end
    
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        ro_app_addr <= 'd0;
    else if(w_op_act)
        ro_app_addr <= i_operation_addr;
    else if(w_mig_wvalid)
        ro_app_addr <= ro_app_addr + 8 ;
    else if(w_mig_rvalid)
        ro_app_addr <= ro_app_addr + 8 ;
    else 
        ro_app_addr <= ro_app_addr;
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        ro_app_wdf_mask <= 'd0;
    else 
        ro_app_wdf_mask <= 'd0;
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        ro_app_wdf_wren <= 'd0;
    else if(r_st_current == P_ST_WRITE)
        ro_app_wdf_wren <= 'd1;
    else 
        ro_app_wdf_wren <= 'd0;
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst) begin
        ro_read_data  <= 'd0;
        ro_read_valid <= 'd0;
    end else  begin
        ro_read_data  <= app_rd_data;
        ro_read_valid <= app_rd_data_valid;
    end 
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        ro_operation_ready <= 'd0;
    else if(w_op_act)
        ro_operation_ready <= 'd0;
    else if(r_st_next == P_ST_IDLE)
        ro_operation_ready <= 'd1;
    else 
        ro_operation_ready <= ro_operation_ready;
end
 
always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        r_write_cnt <= 'd0;
    else if(r_st_current == P_ST_IDLE)
        r_write_cnt <= 'd0;
    else if(w_mig_wvalid)
        r_write_cnt <= r_write_cnt + 1;
    else 
        r_write_cnt <= r_write_cnt;
end

always@(posedge i_ui_clk,posedge i_ui_rst) 
begin
    if(i_ui_rst)
        r_read_cnt <= 'd0;
    else if(r_st_current == P_ST_IDLE)
        r_read_cnt <= 'd0;
    else if(w_mig_rvalid)
        r_read_cnt <= r_read_cnt + 1;
    else 
        r_read_cnt <= r_read_cnt;
end

always@(posedge i_ui_clk,posedge i_ui_rst)
begin
    if(i_ui_rst)
        r_read_data_cnt <= 'd0;
    else if(r_st_current == P_ST_IDLE)
        r_read_data_cnt <= 'd0;
    else if(app_rd_data_valid) 
        r_read_data_cnt <= r_read_data_cnt + 1;
    else 
        r_read_data_cnt <= r_read_data_cnt;
end

endmodule

示列

DDR3_MIG u_DDR3_MIG (
    // Memory interface ports
    .ddr3_addr                      (ddr3_addr                  ),
    .ddr3_ba                        (ddr3_ba                    ),
    .ddr3_cas_n                     (ddr3_cas_n                 ),
    .ddr3_ck_n                      (ddr3_ck_n                  ),
    .ddr3_ck_p                      (ddr3_ck_p                  ),
    .ddr3_cke                       (ddr3_cke                   ),
    .ddr3_ras_n                     (ddr3_ras_n                 ),
    .ddr3_reset_n                   (ddr3_reset_n               ),
    .ddr3_we_n                      (ddr3_we_n                  ),
    .ddr3_dq                        (ddr3_dq                    ),
    .ddr3_dqs_n                     (ddr3_dqs_n                 ),
    .ddr3_dqs_p                     (ddr3_dqs_p                 ),
	.ddr3_cs_n                      (ddr3_cs_n                  ),
    .ddr3_dm                        (ddr3_dm                    ),
    .ddr3_odt                       (ddr3_odt                   ),
    // Application interface ports
    .init_calib_complete            (w_init_calib_complete      ),
    .app_addr                       (w_app_addr                 ),
    .app_cmd                        (w_app_cmd                  ),
    .app_en                         (w_app_en                   ),
    .app_wdf_data                   (w_app_wdf_data             ),
    .app_wdf_end                    (w_app_wdf_end              ),
    .app_wdf_wren                   (w_app_wdf_wren             ),
    .app_rd_data                    (w_app_rd_data              ),
    .app_rd_data_end                (w_app_rd_data_end          ),
    .app_rd_data_valid              (w_app_rd_data_valid        ),
    .app_rdy                        (w_app_rdy                  ),
    .app_wdf_rdy                    (w_app_wdf_rdy              ),
    .app_wdf_mask                   (w_app_wdf_mask             ),
    .app_sr_req                     (0                          ),
    .app_ref_req                    (0                          ),
    .app_zq_req                     (0                          ),
    .app_sr_active                  (                           ),
    .app_ref_ack                    (                           ),
    .app_zq_ack                     (                           ),
    .ui_clk                         (ui_clk                     ),
    .ui_clk_sync_rst                (ui_clk_sync_rst            ),
    // System Clock Ports
    .sys_clk_p                      (i_clk_200m_p               ),
    .sys_clk_n                      (i_clk_200m_n               ),
    .sys_rst                        (0                          ) 
);

MIG_APP_Drive MIG_APP_Drive_u0(
    .i_ui_clk                       (ui_clk                     ),
    .i_ui_rst                       (ui_clk_sync_rst            ),
    .init_calib_complete            (w_init_calib_complete      ),
    .app_addr                       (w_app_addr                 ),    
    .app_cmd                        (w_app_cmd                  ),                        
    .app_en                         (w_app_en                   ),                    
    .app_wdf_data                   (w_app_wdf_data             ),                    
    .app_wdf_end                    (w_app_wdf_end              ),                    
    .app_wdf_wren                   (w_app_wdf_wren             ),                
    .app_rd_data                    (w_app_rd_data              ),                    
    .app_rd_data_end                (w_app_rd_data_end          ),                        
    .app_rd_data_valid              (w_app_rd_data_valid        ),                    
    .app_rdy                        (w_app_rdy                  ),                    
    .app_wdf_rdy                    (w_app_wdf_rdy              ),                
    .app_wdf_mask                   (w_app_wdf_mask             ),    

    .i_operation_cmd                (w_app_operation_cmd        ),
    .i_operation_len                (w_app_operation_len        ),
    .i_operation_addr               (w_app_operation_addr       ),
    .i_operation_valid              (w_app_operation_valid      ),
    .o_operation_ready              (w_app_operation_ready      ),           
    .i_write_data                   (w_app_write_data           ),
    .i_write_last                   (w_app_write_last           ),
    .i_write_valid                  (w_app_write_valid          ),
    .o_read_data                    (w_app_read_data            ),
    .o_read_valid                   (w_app_read_valid           )             
);

基于AXI接口的DDR3

module AXI_Master_Drive(
    input                   i_clk                   ,
    input                   i_rst                   ,

(* mark_debug = "true" *)    input                   i_init_calib_complete   ,

    output [3 :0]           m_axi_awid              ,
    output [29:0]			m_axi_awaddr            ,
    output [7 :0]			m_axi_awlen             ,
    output [2 :0]			m_axi_awsize            ,           
    output [1 :0]			m_axi_awburst           ,           
    output [0 :0]			m_axi_awlock            ,              
    output [3 :0]			m_axi_awcache           ,          
    output [2 :0]			m_axi_awprot            ,                  
    output [3 :0]			m_axi_awqos             ,         
    output 		            m_axi_awvalid           ,                 
(* mark_debug = "true" *)    input 			        m_axi_awready           ,   

    output [255:0]			m_axi_wdata             ,                 
    output [31:0]			m_axi_wstrb             ,             
    output			        m_axi_wlast             ,       
    output			        m_axi_wvalid            ,   
(* mark_debug = "true" *)    input			        m_axi_wready            ,  

    input [3 :0]			m_axi_bid               ,       
    input [1 :0]			m_axi_bresp             ,   
(* mark_debug = "true" *)    input			        m_axi_bvalid            ,       
    output			        m_axi_bready            ,  

    output  [3 :0]			m_axi_arid              ,       
    output  [29:0]			m_axi_araddr            ,   
    output  [7 :0]			m_axi_arlen             ,
    output  [2 :0]			m_axi_arsize            ,   
    output  [1 :0]			m_axi_arburst           ,       
    output  [0 :0]			m_axi_arlock            ,       
    output  [3 :0]			m_axi_arcache           ,       
    output  [2 :0]			m_axi_arprot            ,       
    output  [3 :0]			m_axi_arqos             ,   
    output			        m_axi_arvalid           ,   
(* mark_debug = "true" *)    input			        m_axi_arready           ,  

    input [3 :0]			m_axi_rid               ,       
    input [255:0]			m_axi_rdata             ,       
    input [1 :0]			m_axi_rresp             ,       
    input			        m_axi_rlast             ,       
    input			        m_axi_rvalid            ,       
    output			        m_axi_rready                       
);

/***************function**************/

/***************parameter*************/
localparam                  P_ST_INIT   =   0   ,
                            P_ST_IDLE   =   1   ,
                            P_ST_WRITE  =   2   ,
                            P_ST_READ   =   3   ;

localparam                  P_LEN       =   16  ;

/***************port******************/             

/***************mechine***************/
(* mark_debug = "true" *)reg  [7 :0]                 r_st_current        ;
reg  [7 :0]                 r_st_next           ;
reg  [15:0]                 r_st_cnt            ;

/***************reg*******************/
reg  [3 :0]                 ro_m_axi_awid       ;
(* mark_debug = "true" *)reg  [29:0]			        ro_m_axi_awaddr     ;
(* mark_debug = "true" *)reg  [7 :0]			        ro_m_axi_awlen      ;
reg  [2 :0]			        ro_m_axi_awsize     ;
reg  [1 :0]			        ro_m_axi_awburst    ;
reg  [0 :0]			        ro_m_axi_awlock     ;
reg  [3 :0]			        ro_m_axi_awcache    ;
reg  [2 :0]			        ro_m_axi_awprot     ;
reg  [3 :0]			        ro_m_axi_awqos      ;
(* mark_debug = "true" *)reg  		                ro_m_axi_awvalid    ;
(* mark_debug = "true" *)reg  [255:0]			    ro_m_axi_wdata      ;
reg  [31:0]			        ro_m_axi_wstrb      ;
(* mark_debug = "true" *)reg  			            ro_m_axi_wlast      ;
(* mark_debug = "true" *)reg  			            ro_m_axi_wvalid     ;
(* mark_debug = "true" *)reg                         ro_m_axi_bready     ;
reg  [3 :0]			        ro_m_axi_arid       ;
(* mark_debug = "true" *)reg  [29:0]			        ro_m_axi_araddr     ;
(* mark_debug = "true" *)reg  [7 :0]			        ro_m_axi_arlen      ;
reg  [2 :0]			        ro_m_axi_arsize     ;
reg  [1 :0]			        ro_m_axi_arburst    ;
reg  [0 :0]			        ro_m_axi_arlock     ;
reg  [3 :0]			        ro_m_axi_arcache    ;
reg  [2 :0]			        ro_m_axi_arprot     ;
reg  [3 :0]			        ro_m_axi_arqos      ;
(* mark_debug = "true" *)reg  		                ro_m_axi_arvalid    ;
(* mark_debug = "true" *)reg                         ro_m_axi_rready     ;
reg  [3 :0]			        ri_m_axi_rid        ;
(* mark_debug = "true" *)reg  [255:0]			    ri_m_axi_rdata      ;
reg  [1 :0]			        ri_m_axi_rresp      ;
(* mark_debug = "true" *)reg  			            ri_m_axi_rlast      ;
(* mark_debug = "true" *)reg  			            ri_m_axi_rvalid     ;
reg  [15:0]     r_read_cnt;

/***************wire******************/
wire                        w_aw_act            ;
wire                        w_w_act             ;
wire                        w_br_act            ;
wire                        w_ar_act            ;
wire                        w_r_act             ;

/***************component*************/

/***************assign****************/
assign m_axi_awid    = ro_m_axi_awid                    ;
assign m_axi_awaddr  = ro_m_axi_awaddr                  ;
assign m_axi_awlen   = ro_m_axi_awlen                   ;
assign m_axi_awsize  = ro_m_axi_awsize                  ;
assign m_axi_awburst = ro_m_axi_awburst                 ;
assign m_axi_awlock  = ro_m_axi_awlock                  ;
assign m_axi_awcache = ro_m_axi_awcache                 ;
assign m_axi_awprot  = ro_m_axi_awprot                  ;
assign m_axi_awqos   = ro_m_axi_awqos                   ;
assign m_axi_awvalid = ro_m_axi_awvalid                 ;
assign m_axi_wdata   = ro_m_axi_wdata                   ;
assign m_axi_wstrb   = ro_m_axi_wstrb                   ;
assign m_axi_wlast   = ro_m_axi_wlast                   ;
assign m_axi_wvalid  = ro_m_axi_wvalid                  ;
assign m_axi_bready  = ro_m_axi_bready                  ;
assign m_axi_arid    = ro_m_axi_arid                    ;
assign m_axi_araddr  = ro_m_axi_araddr                  ;
assign m_axi_arlen   = ro_m_axi_arlen                   ;
assign m_axi_arsize  = ro_m_axi_arsize                  ;
assign m_axi_arburst = ro_m_axi_arburst                 ;
assign m_axi_arlock  = ro_m_axi_arlock                  ;
assign m_axi_arcache = ro_m_axi_arcache                 ;
assign m_axi_arprot  = ro_m_axi_arprot                  ;
assign m_axi_arqos   = ro_m_axi_arqos                   ;
assign m_axi_arvalid = ro_m_axi_arvalid                 ;
assign m_axi_rready  = ro_m_axi_rready                  ;
assign w_aw_act      = m_axi_awvalid & m_axi_awready    ;//写地址激活信号
assign w_w_act       = m_axi_wvalid  & m_axi_wready     ;//写数据激活信号
assign w_br_act      = m_axi_bvalid  & m_axi_bready     ;//响应激活信号
assign w_ar_act      = m_axi_arvalid & m_axi_arready    ;//读地址激活信号
assign w_r_act       = m_axi_rvalid  & m_axi_rready     ;//读数据信号

/***************always****************/
//第一段状态机
always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        r_st_current <= P_ST_IDLE;
    else
        r_st_current <= r_st_next;    
end

//第二段
always@(*)
begin
    case(r_st_current)
        P_ST_INIT   : r_st_next <= i_init_calib_complete ? P_ST_IDLE : P_ST_INIT;
        P_ST_IDLE   : r_st_next <= P_ST_WRITE;
        P_ST_WRITE  : r_st_next <= w_br_act     ? P_ST_READ : P_ST_WRITE;
        P_ST_READ   : r_st_next <= r_read_cnt == P_LEN - 1 && w_r_act  ? P_ST_IDLE : P_ST_READ;
        default     : r_st_next <= P_ST_IDLE;
    endcase
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        r_st_cnt <= 'd0;
    else if(r_st_current != r_st_next)
        r_st_cnt <= 'd0;
    else 
        r_st_cnt <= r_st_cnt + 1;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst) begin
        ro_m_axi_awid    <= 'd0;
        ro_m_axi_awaddr  <= 'd0;
        ro_m_axi_awlen   <= 'd0;
        ro_m_axi_awsize  <= 'd0;
        ro_m_axi_awburst <= 'd0;
        ro_m_axi_awlock  <= 'd0;
        ro_m_axi_awcache <= 'd0;
        ro_m_axi_awprot  <= 'd0;
        ro_m_axi_awqos   <= 'd0;
        ro_m_axi_awvalid <= 'd0;
    end else if(w_aw_act) begin
        ro_m_axi_awid    <= 'd0;
        ro_m_axi_awaddr  <= 'd0;
        ro_m_axi_awlen   <= 'd0;
        ro_m_axi_awsize  <= 'd0;
        ro_m_axi_awburst <= 'd0;
        ro_m_axi_awlock  <= 'd0;
        ro_m_axi_awcache <= 'd0;
        ro_m_axi_awprot  <= 'd0;
        ro_m_axi_awqos   <= 'd0;
        ro_m_axi_awvalid <= 'd0;
    end else if(r_st_current == P_ST_WRITE && r_st_cnt == 0) begin
        ro_m_axi_awid    <= 'd0;
        ro_m_axi_awaddr  <= 'd0;
        ro_m_axi_awlen   <= P_LEN - 1;
        ro_m_axi_awsize  <= 3'b101;//32byte
        ro_m_axi_awburst <= 'd1;//突发模式
        ro_m_axi_awlock  <= 'd0;
        ro_m_axi_awcache <= 4'b0010;//无缓存
        ro_m_axi_awprot  <= 'd0;
        ro_m_axi_awqos   <= 'd0;
        ro_m_axi_awvalid <= 'd1;//有效拉高
    end else begin
        ro_m_axi_awid    <= ro_m_axi_awid   ;
        ro_m_axi_awaddr  <= ro_m_axi_awaddr ;
        ro_m_axi_awlen   <= ro_m_axi_awlen  ;
        ro_m_axi_awsize  <= ro_m_axi_awsize ;
        ro_m_axi_awburst <= ro_m_axi_awburst;
        ro_m_axi_awlock  <= ro_m_axi_awlock ;
        ro_m_axi_awcache <= ro_m_axi_awcache;
        ro_m_axi_awprot  <= ro_m_axi_awprot ;
        ro_m_axi_awqos   <= ro_m_axi_awqos  ;
        ro_m_axi_awvalid <= ro_m_axi_awvalid;
    end 
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        ro_m_axi_wdata <= 'd0;
    else if(ro_m_axi_wdata == P_LEN - 1 && w_w_act)
        ro_m_axi_wdata <= 'd0;
    else if(w_w_act)
        ro_m_axi_wdata <= ro_m_axi_wdata + 1;
    else 
        ro_m_axi_wdata <= ro_m_axi_wdata;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        ro_m_axi_wvalid <= 'd0;
    else if(ro_m_axi_wdata == P_LEN - 1 && w_w_act)
        ro_m_axi_wvalid <= 'd0;
    else if(w_aw_act)       
        ro_m_axi_wvalid <= 'd1;
    else 
        ro_m_axi_wvalid <= ro_m_axi_wvalid;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        ro_m_axi_wlast <= 'd0;
    else if(ro_m_axi_wdata == P_LEN - 1 && w_w_act)
        ro_m_axi_wlast <= 'd0;
    else if(ro_m_axi_wdata == P_LEN - 2)   
        ro_m_axi_wlast <= 'd1;
    else 
        ro_m_axi_wlast <= ro_m_axi_wlast;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        ro_m_axi_wstrb <= 32'hffffffff;
    else 
        ro_m_axi_wstrb <= 32'hffffffff;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        ro_m_axi_bready <= 'd0;
    else if(w_br_act)
        ro_m_axi_bready <= 'd0;
    else if(ro_m_axi_wlast)
        ro_m_axi_bready <= 'd1;
    else 
        ro_m_axi_bready <= ro_m_axi_bready;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst) begin
        ro_m_axi_arid    <= 'd0;
        ro_m_axi_araddr  <= 'd0;
        ro_m_axi_arlen   <= 'd0;
        ro_m_axi_arsize  <= 'd0;
        ro_m_axi_arburst <= 'd0;
        ro_m_axi_arlock  <= 'd0;
        ro_m_axi_arcache <= 'd0;
        ro_m_axi_arprot  <= 'd0;
        ro_m_axi_arqos   <= 'd0;
        ro_m_axi_arvalid <= 'd0;
    end else if(w_ar_act) begin
        ro_m_axi_arid    <= 'd0;
        ro_m_axi_araddr  <= 'd0;
        ro_m_axi_arlen   <= 'd0;
        ro_m_axi_arsize  <= 'd0;
        ro_m_axi_arburst <= 'd0;
        ro_m_axi_arlock  <= 'd0;
        ro_m_axi_arcache <= 'd0;
        ro_m_axi_arprot  <= 'd0;
        ro_m_axi_arqos   <= 'd0;
        ro_m_axi_arvalid <= 'd0;
    end else if(r_st_current == P_ST_READ && r_st_cnt == 0) begin
        ro_m_axi_arid    <= 'd0;
        ro_m_axi_araddr  <= 'd0;
        ro_m_axi_arlen   <= P_LEN - 1;
        ro_m_axi_arsize  <= 3'b101;
        ro_m_axi_arburst <= 'd1;
        ro_m_axi_arlock  <= 'd0;
        ro_m_axi_arcache <= 4'b0010;
        ro_m_axi_arprot  <= 'd0;
        ro_m_axi_arqos   <= 'd0;
        ro_m_axi_arvalid <= 'd1;
    end else begin
        ro_m_axi_arid    <= ro_m_axi_arid   ;
        ro_m_axi_araddr  <= ro_m_axi_araddr ;
        ro_m_axi_arlen   <= ro_m_axi_arlen  ;
        ro_m_axi_arsize  <= ro_m_axi_arsize ;
        ro_m_axi_arburst <= ro_m_axi_arburst;
        ro_m_axi_arlock  <= ro_m_axi_arlock ;
        ro_m_axi_arcache <= ro_m_axi_arcache;
        ro_m_axi_arprot  <= ro_m_axi_arprot ;
        ro_m_axi_arqos   <= ro_m_axi_arqos  ;
        ro_m_axi_arvalid <= ro_m_axi_arvalid;
    end 
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        ro_m_axi_rready <= 'd0;
    else if(r_read_cnt == P_LEN - 1 && w_r_act)
        ro_m_axi_rready <= 'd0;
    else if(w_ar_act)
        ro_m_axi_rready <= 'd1;
    else 
        ro_m_axi_rready <= ro_m_axi_rready;
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst) begin
        ri_m_axi_rid    <= 'd0;
        ri_m_axi_rdata  <= 'd0;
        ri_m_axi_rresp  <= 'd0;
        ri_m_axi_rlast  <= 'd0;
        ri_m_axi_rvalid <= 'd0;
    end else begin
        ri_m_axi_rid    <= m_axi_rid   ;
        ri_m_axi_rdata  <= m_axi_rdata ;
        ri_m_axi_rresp  <= m_axi_rresp ;
        ri_m_axi_rlast  <= m_axi_rlast ;
        ri_m_axi_rvalid <= m_axi_rvalid;
    end
end

always@(posedge i_clk,posedge i_rst)
begin
    if(i_rst)
        r_read_cnt <= 'd0;
    else if(r_read_cnt == P_LEN - 1 && w_r_act)
        r_read_cnt <= 'd0;
    else if(w_r_act)
        r_read_cnt <= r_read_cnt + 1;
    else 
        r_read_cnt <= r_read_cnt;
end
endmodule

http://www.kler.cn/a/273144.html

相关文章:

  • CentOS 7 安装 ntp,自动校准系统时间
  • 【论文阅读笔记】Wavelet Convolutions for Large Receptive Fields
  • openEuler 系统中 Samba 文件共享服务器管理(windows、linux文件共享操作方法)
  • Ant Design Pro 框架 - fieldProps 的使用
  • 跨平台使用高德地图服务
  • git reset 删除错误提交
  • Leetcode 3080. Mark Elements on Array by Performing Queries
  • 【SpringCloud】使用Seata实现分布式事务
  • 有关于Docker(容器),Image(镜像)部署等名词含义
  • 恒创科技:什么是BGP线路服务器?BGP机房的优点是什么?
  • vue中判断是否使用自定义插槽
  • 视频私有云,HDMI/AV多硬件设备终端接入,SFU/MCU视频会议交互方案。
  • 【NTN 卫星通信】 TN和多NTN配合的应用场景
  • Android FrameWork 学习路线
  • 行尾检测论文汇总
  • 挖到宝了!这些内容管理平台是企业的最佳选择
  • Kotlin进阶之协程从上车到起飞
  • “SRP模型+”多技术融合在生态环境脆弱性评价模型构建、时空格局演变分析与RSEI 指数的生态质量评价及拓展应用教程
  • Algae c++
  • SSA优化最近邻分类预测(matlab代码)
  • 代码随想录刷题day27|组合总和II组合总和II分割回文串
  • 四.排序(冒泡/选择)
  • 【数据结构与算法】:非递归实现快速排序、归并排序
  • 从0到1理解MySQL的事务和ACID特性
  • java方法的引用传递和值传递
  • 【力扣精选算法100道】——带你了解(数组模拟栈)算法