rk3568 Android 添加IR遥控器
rk3568 添加IR遥控器
生活中充满了各种波长的电磁波，所谓的可见(色)光就是人眼可见的电磁波谱，其波长为 380~770nm，为了避免遥控器发射的光造成人眼不适及减少一般人造光源干扰，故选用人眼不可见的红外线(Infrared)波长，目前业界遥控器发射头几乎都选用 940nm 波长。
红外线遥控器的应用也是一种无线讯号传输，跟大部分的无线传输技术一样，为了避免环境中同波长电磁波的干扰，故会在其传输讯号上加上如图二所示的载波(carrier frequency)，在遥控应用的载波范围为 30~60kHz，而 38kHz 为最常见的载波频率。
目前红外遥控协议有RC5、 SIRCS、 Sy、 RECS80、Denon、NEC、Motorola、Japanese、SAMSWNG 和 Daewoo 等。Rockchip平台只支持 NEC编码，好在国内电器大多使用该编码协议。
文章目录
- rk3568 添加IR遥控器
- 1. rk3568 添加红外遥控
- 1.1 参照原理图添加内核IR的配置
- 1.2 添加红外按键上报键值(rk平台单独定义)
- 1.3 添加键值转换
- 1.4 自动编译构建
- 2 Linux input 键值表
- 3. Android 键值表
- Tips
1. rk3568 添加红外遥控
RK平台PWM 有三种工作模式， reference mode, one-shot mode 和 continuousmode. 红外遥
控器就采用 reference mode，这种模式下 PWM 可以捕获输入高低电平的宽度，并产生中断，CPU
接收到中断后去相应的寄存器读取。
1.1 参照原理图添加内核IR的配置
参照原理图，可知使用 PWM3 作为红外遥控接收。
向正在使用设备树添加如下配置。
&pwm3 {
status = "okay";
compatible = "rockchip,remotectl-pwm";
remote_pwm_id = <3>;
handle_cpu_id = <1>;
remote_support_psci = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pins>;
ir_key1 {
rockchip,usercode = <0x4040>;
rockchip,key_table =
<0xf2 KEY_REPLY>,
<0xba KEY_BACK>,
<0xf4 KEY_UP>,
<0xf1 KEY_DOWN>,
<0xef KEY_LEFT>,
<0xee KEY_RIGHT>,
<0xbd KEY_HOME>,
<0xea KEY_VOLUMEUP>,
<0xe3 KEY_VOLUMEDOWN>,
<0xe2 KEY_SEARCH>,
<0xb2 KEY_POWER>,
<0xbc KEY_MUTE>,
<0xec KEY_MENU>,
<0xbf 0x190>,
<0xe0 0x191>,
<0xe1 0x192>,
<0xe9 183>,
<0xe6 248>,
<0xe8 185>,
<0xe7 186>,
<0xf0 388>,
<0xbe 0x175>;
};
......
};
查看输入设备，找到刚添加的pwm红外设备。驱动加正常加载，接下来就是对照键值添加遥控器。
# getevents
add device 1: /dev/input/event2
name: "adc-keys"
add device 2: /dev/input/event0
name: "fdd70030.pwm"
add device 3: /dev/input/event3
name: "rk-headset"
add device 4: /dev/input/event1
name: "rk805 pwrkey"
1.2 添加红外按键上报键值(rk平台单独定义)
RK平台可直接查看红外接收，打开键值命令如下：
echo 1 > /sys/module/rockchip_pwm_remotectl/parameters/code_print
内核日志太多，可使用adb 命令过滤直接得到键值。USERCODE 添加遥控dts 对应的 rockchip,usercode，RMC_GETDATA 对应键值可通过rockchip,key_table 转换为rk-input键值。
adb root;adb shell
# cat /dev/kmsg | grep USERCODE -A 2
6,1136,469064745,-;USERCODE=0x4040
6,1137,469091760,-;RMC_GETDATA=b2
6,1138,482889791,-;USERCODE=0x4040
6,1139,482916765,-;RMC_GETDATA=b4
字母和符号键都是 linux 的标准键值，在可以在 include/dt-bindings/input/input.h。
详见 2 input 键值表。
1.3 添加键值转换
Linux标准键值与Android的标准键值并不相同，需要转换文件匹配对应关系。中间转换配置文件会根据红外遥控使用PWM匹配对应PWM标号所属名的配置文件。本文中使用PWM3对应的编号pwm3: pwm@fdd70030 {，键值转换配置文件名为fdd70030_pwm.kl，设备描述文件则为fdd70030_pwm.idc。Android 键值有不懂详见#3Android 键值表。临时调试可手动拷贝到 /vendor/usr/keylayout,重启生效。
- dd70030_pwm.idc
device.internal = 1 #是否为内部设备
audio.mic = 0 #是否带mic
- dd70030_pwm.kl
#$_FOR_ROCKCHIP_RBOX_$
#$_rbox_$_modify_$_chenzhi_20120220: add for IR remote
key 28 ENTER
key 116 POWER
key 158 BACK
key 139 MENU
key 217 SEARCH
key 141 ASSIST
key 164 MEDIA_PLAY_PAUSE
key 232 DPAD_CENTER
key 108 DPAD_DOWN
key 103 DPAD_UP
key 102 HOME
key 105 DPAD_LEFT
key 106 DPAD_RIGHT
key 115 VOLUME_UP
key 114 VOLUME_DOWN
key 143 NOTIFICATION
key 113 VOLUME_MUTE
key 388 PROFILE_SWITCH
key 2 1
key 3 2
key 4 3
key 5 4
key 6 5
key 7 6
key 8 7
key 9 8
key 10 9
key 11 0
1.4 自动编译构建
以 rk356x_box 为例增加，需要将 fdd70030_pwm.kl 和fdd70030_pwm.idc 拷贝到 device/rockchip/rk356x_box/rk356x_box/remote_config目录下。并在 rk356x_box/rk356x_box.mk添加拷贝规则，编译时会自动拷贝到指定目录。
# copy input keylayout and device config
PRODUCT_COPY_FILES += \
device/rockchip/rk356x_box/remote_config/fe700030_pwm.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/fe700030_pwm.kl \
- device/rockchip/rk356x_box/remote_config/fe6e0030_pwm.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/fe6e0030_pwm.kl
+ device/rockchip/rk356x_box/remote_config/fe6e0030_pwm.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/fe6e0030_pwm.kl \
+ device/rockchip/rk356x_box/remote_config/fdd70030_pwm.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/fdd70030_pwm.kl
2 Linux input 键值表
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Device properties and quirks
*/
/*
* Keys and buttons
*
* Most of the keys/buttons are modeled after USB HUT 1.12
* (see http://www.usb.org/developers/hidpage).
* Abbreviations in the comments:
* AC - Application Control
* AL - Application Launch Button
* SC - System Control
*/
#define KEY_RESERVED 0
#define KEY_ESC 1
#define KEY_1 2
#define KEY_2 3
#define KEY_3 4
#define KEY_4 5
#define KEY_5 6
#define KEY_6 7
#define KEY_7 8
#define KEY_8 9
#define KEY_9 10
#define KEY_0 11
#define KEY_MINUS 12
#define KEY_EQUAL 13
#define KEY_BACKSPACE 14
#define KEY_TAB 15
#define KEY_Q 16
#define KEY_W 17
#define KEY_E 18
#define KEY_R 19
#define KEY_T 20
#define KEY_Y 21
#define KEY_U 22
#define KEY_I 23
#define KEY_O 24
#define KEY_P 25
#define KEY_LEFTBRACE 26
#define KEY_RIGHTBRACE 27
#define KEY_ENTER 28
#define KEY_LEFTCTRL 29
#define KEY_A 30
#define KEY_S 31
#define KEY_D 32
#define KEY_F 33
#define KEY_G 34
#define KEY_H 35
#define KEY_J 36
#define KEY_K 37
#define KEY_L 38
#define KEY_SEMICOLON 39
#define KEY_APOSTROPHE 40
#define KEY_GRAVE 41
#define KEY_LEFTSHIFT 42
#define KEY_BACKSLASH 43
#define KEY_Z 44
#define KEY_X 45
#define KEY_C 46
#define KEY_V 47
#define KEY_B 48
#define KEY_N 49
#define KEY_M 50
#define KEY_COMMA 51
#define KEY_DOT 52
#define KEY_SLASH 53
#define KEY_RIGHTSHIFT 54
#define KEY_KPASTERISK 55
#define KEY_LEFTALT 56
#define KEY_SPACE 57
#define KEY_CAPSLOCK 58
#define KEY_F1 59
#define KEY_F2 60
#define KEY_F3 61
#define KEY_F4 62
#define KEY_F5 63
#define KEY_F6 64
#define KEY_F7 65
#define KEY_F8 66
#define KEY_F9 67
#define KEY_F10 68
#define KEY_NUMLOCK 69
#define KEY_SCROLLLOCK 70
#define KEY_KP7 71
#define KEY_KP8 72
#define KEY_KP9 73
#define KEY_KPMINUS 74
#define KEY_KP4 75
#define KEY_KP5 76
#define KEY_KP6 77
#define KEY_KPPLUS 78
#define KEY_KP1 79
#define KEY_KP2 80
#define KEY_KP3 81
#define KEY_KP0 82
#define KEY_KPDOT 83
#define KEY_ZENKAKUHANKAKU 85
#define KEY_102ND 86
#define KEY_F11 87
#define KEY_F12 88
#define KEY_RO 89
#define KEY_KATAKANA 90
#define KEY_HIRAGANA 91
#define KEY_HENKAN 92
#define KEY_KATAKANAHIRAGANA 93
#define KEY_MUHENKAN 94
#define KEY_KPJPCOMMA 95
#define KEY_KPENTER 96
#define KEY_RIGHTCTRL 97
#define KEY_KPSLASH 98
#define KEY_SYSRQ 99
#define KEY_RIGHTALT 100
#define KEY_LINEFEED 101
#define KEY_HOME 102
#define KEY_UP 103
#define KEY_PAGEUP 104
#define KEY_LEFT 105
#define KEY_RIGHT 106
#define KEY_END 107
#define KEY_DOWN 108
#define KEY_PAGEDOWN 109
#define KEY_INSERT 110
#define KEY_DELETE 111
#define KEY_MACRO 112
#define KEY_MUTE 113
#define KEY_VOLUMEDOWN 114
#define KEY_VOLUMEUP 115
#define KEY_POWER 116 /* SC System Power Down */
#define KEY_KPEQUAL 117
#define KEY_KPPLUSMINUS 118
#define KEY_PAUSE 119
#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
#define KEY_KPCOMMA 121
#define KEY_HANGEUL 122
#define KEY_HANGUEL KEY_HANGEUL
#define KEY_HANJA 123
#define KEY_YEN 124
#define KEY_LEFTMETA 125
#define KEY_RIGHTMETA 126
#define KEY_COMPOSE 127
#define KEY_STOP 128 /* AC Stop */
#define KEY_AGAIN 129
#define KEY_PROPS 130 /* AC Properties */
#define KEY_UNDO 131 /* AC Undo */
#define KEY_FRONT 132
#define KEY_COPY 133 /* AC Copy */
#define KEY_OPEN 134 /* AC Open */
#define KEY_PASTE 135 /* AC Paste */
#define KEY_FIND 136 /* AC Search */
#define KEY_CUT 137 /* AC Cut */
#define KEY_HELP 138 /* AL Integrated Help Center */
#define KEY_MENU 139 /* Menu (show menu) */
#define KEY_CALC 140 /* AL Calculator */
#define KEY_SETUP 141
#define KEY_SLEEP 142 /* SC System Sleep */
#define KEY_WAKEUP 143 /* System Wake Up */
#define KEY_FILE 144 /* AL Local Machine Browser */
#define KEY_SENDFILE 145
#define KEY_DELETEFILE 146
#define KEY_XFER 147
#define KEY_PROG1 148
#define KEY_PROG2 149
#define KEY_WWW 150 /* AL Internet Browser */
#define KEY_MSDOS 151
#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
#define KEY_SCREENLOCK KEY_COFFEE
#define KEY_DIRECTION 153
#define KEY_CYCLEWINDOWS 154
#define KEY_MAIL 155
#define KEY_BOOKMARKS 156 /* AC Bookmarks */
#define KEY_COMPUTER 157
#define KEY_BACK 158 /* AC Back */
#define KEY_FORWARD 159 /* AC Forward */
#define KEY_CLOSECD 160
#define KEY_EJECTCD 161
#define KEY_EJECTCLOSECD 162
#define KEY_NEXTSONG 163
#define KEY_PLAYPAUSE 164
#define KEY_PREVIOUSSONG 165
#define KEY_STOPCD 166
#define KEY_RECORD 167
#define KEY_REWIND 168
#define KEY_PHONE 169 /* Media Select Telephone */
#define KEY_ISO 170
#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
#define KEY_HOMEPAGE 172 /* AC Home */
#define KEY_REFRESH 173 /* AC Refresh */
#define KEY_EXIT 174 /* AC Exit */
#define KEY_MOVE 175
#define KEY_EDIT 176
#define KEY_SCROLLUP 177
#define KEY_SCROLLDOWN 178
#define KEY_KPLEFTPAREN 179
#define KEY_KPRIGHTPAREN 180
#define KEY_NEW 181 /* AC New */
#define KEY_REDO 182 /* AC Redo/Repeat */
#define KEY_F13 183
#define KEY_F14 184
#define KEY_F15 185
#define KEY_F16 186
#define KEY_F17 187
#define KEY_F18 188
#define KEY_F19 189
#define KEY_F20 190
#define KEY_F21 191
#define KEY_F22 192
#define KEY_F23 193
#define KEY_F24 194
#define KEY_PLAYCD 200
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
#define KEY_DASHBOARD 204 /* AL Dashboard */
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
#define KEY_FASTFORWARD 208
#define KEY_BASSBOOST 209
#define KEY_PRINT 210 /* AC Print */
#define KEY_HP 211
#define KEY_CAMERA 212
#define KEY_SOUND 213
#define KEY_QUESTION 214
#define KEY_EMAIL 215
#define KEY_CHAT 216
#define KEY_SEARCH 217
#define KEY_CONNECT 218
#define KEY_FINANCE 219 /* AL Checkbook/Finance */
#define KEY_SPORT 220
#define KEY_SHOP 221
#define KEY_ALTERASE 222
#define KEY_CANCEL 223 /* AC Cancel */
#define KEY_BRIGHTNESSDOWN 224
#define KEY_BRIGHTNESSUP 225
#define KEY_MEDIA 226
#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
outputs (Monitor/LCD/TV-out/etc) */
#define KEY_KBDILLUMTOGGLE 228
#define KEY_KBDILLUMDOWN 229
#define KEY_KBDILLUMUP 230
#define KEY_SEND 231 /* AC Send */
#define KEY_REPLY 232 /* AC Reply */
#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
#define KEY_SAVE 234 /* AC Save */
#define KEY_DOCUMENTS 235
#define KEY_BATTERY 236
#define KEY_BLUETOOTH 237
#define KEY_WLAN 238
#define KEY_UWB 239
#define KEY_UNKNOWN 240
#define KEY_VIDEO_NEXT 241 /* drive next video source */
#define KEY_VIDEO_PREV 242 /* drive previous video source */
#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
brightness control is off,
rely on ambient */
#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
#define KEY_DISPLAY_OFF 245 /* display device to off state */
#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
#define KEY_WIMAX KEY_WWAN
#define KEY_RFKILL 247 /* Key that controls all radios */
#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
/* Code 255 is reserved for special needs of AT keyboard driver */
#define BTN_MISC 0x100
#define BTN_0 0x100
#define BTN_1 0x101
#define BTN_2 0x102
#define BTN_3 0x103
#define BTN_4 0x104
#define BTN_5 0x105
#define BTN_6 0x106
#define BTN_7 0x107
#define BTN_8 0x108
#define BTN_9 0x109
#define BTN_MOUSE 0x110
#define BTN_LEFT 0x110
#define BTN_RIGHT 0x111
#define BTN_MIDDLE 0x112
#define BTN_SIDE 0x113
#define BTN_EXTRA 0x114
#define BTN_FORWARD 0x115
#define BTN_BACK 0x116
#define BTN_TASK 0x117
#define BTN_JOYSTICK 0x120
#define BTN_TRIGGER 0x120
#define BTN_THUMB 0x121
#define BTN_THUMB2 0x122
#define BTN_TOP 0x123
#define BTN_TOP2 0x124
#define BTN_PINKIE 0x125
#define BTN_BASE 0x126
#define BTN_BASE2 0x127
#define BTN_BASE3 0x128
#define BTN_BASE4 0x129
#define BTN_BASE5 0x12a
#define BTN_BASE6 0x12b
#define BTN_DEAD 0x12f
#define BTN_GAMEPAD 0x130
#define BTN_SOUTH 0x130
#define BTN_A BTN_SOUTH
#define BTN_EAST 0x131
#define BTN_B BTN_EAST
#define BTN_C 0x132
#define BTN_NORTH 0x133
#define BTN_X BTN_NORTH
#define BTN_WEST 0x134
#define BTN_Y BTN_WEST
#define BTN_Z 0x135
#define BTN_TL 0x136
#define BTN_TR 0x137
#define BTN_TL2 0x138
#define BTN_TR2 0x139
#define BTN_SELECT 0x13a
#define BTN_START 0x13b
#define BTN_MODE 0x13c
#define BTN_THUMBL 0x13d
#define BTN_THUMBR 0x13e
#define BTN_DIGI 0x140
#define BTN_TOOL_PEN 0x140
#define BTN_TOOL_RUBBER 0x141
#define BTN_TOOL_BRUSH 0x142
#define BTN_TOOL_PENCIL 0x143
#define BTN_TOOL_AIRBRUSH 0x144
#define BTN_TOOL_FINGER 0x145
#define BTN_TOOL_MOUSE 0x146
#define BTN_TOOL_LENS 0x147
#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
#define BTN_TOUCH 0x14a
#define BTN_STYLUS 0x14b
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define BTN_GEAR_UP 0x151
#define KEY_OK 0x160
#define KEY_SELECT 0x161
#define KEY_GOTO 0x162
#define KEY_CLEAR 0x163
#define KEY_POWER2 0x164
#define KEY_OPTION 0x165
#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
#define KEY_TIME 0x167
#define KEY_VENDOR 0x168
#define KEY_ARCHIVE 0x169
#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
#define KEY_CHANNEL 0x16b
#define KEY_FAVORITES 0x16c
#define KEY_EPG 0x16d
#define KEY_PVR 0x16e /* Media Select Home */
#define KEY_MHP 0x16f
#define KEY_LANGUAGE 0x170
#define KEY_TITLE 0x171
#define KEY_SUBTITLE 0x172
#define KEY_ANGLE 0x173
#define KEY_ZOOM 0x174
#define KEY_MODE 0x175
#define KEY_KEYBOARD 0x176
#define KEY_SCREEN 0x177
#define KEY_PC 0x178 /* Media Select Computer */
#define KEY_TV 0x179 /* Media Select TV */
#define KEY_TV2 0x17a /* Media Select Cable */
#define KEY_VCR 0x17b /* Media Select VCR */
#define KEY_VCR2 0x17c /* VCR Plus */
#define KEY_SAT 0x17d /* Media Select Satellite */
#define KEY_SAT2 0x17e
#define KEY_CD 0x17f /* Media Select CD */
#define KEY_TAPE 0x180 /* Media Select Tape */
#define KEY_RADIO 0x181
#define KEY_TUNER 0x182 /* Media Select Tuner */
#define KEY_PLAYER 0x183
#define KEY_TEXT 0x184
#define KEY_DVD 0x185 /* Media Select DVD */
#define KEY_AUX 0x186
#define KEY_MP3 0x187
#define KEY_AUDIO 0x188 /* AL Audio Browser */
#define KEY_VIDEO 0x189 /* AL Movie Browser */
#define KEY_DIRECTORY 0x18a
#define KEY_LIST 0x18b
#define KEY_MEMO 0x18c /* Media Select Messages */
#define KEY_CALENDAR 0x18d
#define KEY_RED 0x18e
#define KEY_GREEN 0x18f
#define KEY_YELLOW 0x190
#define KEY_BLUE 0x191
#define KEY_CHANNELUP 0x192 /* Channel Increment */
#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
#define KEY_FIRST 0x194
#define KEY_LAST 0x195 /* Recall Last */
#define KEY_AB 0x196
#define KEY_NEXT 0x197
#define KEY_RESTART 0x198
#define KEY_SLOW 0x199
#define KEY_SHUFFLE 0x19a
#define KEY_BREAK 0x19b
#define KEY_PREVIOUS 0x19c
#define KEY_DIGITS 0x19d
#define KEY_TEEN 0x19e
#define KEY_TWEN 0x19f
#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
#define KEY_GAMES 0x1a1 /* Media Select Games */
#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
#define KEY_EDITOR 0x1a6 /* AL Text Editor */
#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
#define KEY_DATABASE 0x1aa /* AL Database App */
#define KEY_NEWS 0x1ab /* AL Newsreader */
#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
#define KEY_LOGOFF 0x1b1 /* AL Logoff */
#define KEY_DOLLAR 0x1b2
#define KEY_EURO 0x1b3
#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
#define KEY_FRAMEFORWARD 0x1b5
#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
#define KEY_IMAGES 0x1ba /* AL Image Browser */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
#define KEY_DEL_LINE 0x1c3
#define KEY_FN 0x1d0
#define KEY_FN_ESC 0x1d1
#define KEY_FN_F1 0x1d2
#define KEY_FN_F2 0x1d3
#define KEY_FN_F3 0x1d4
#define KEY_FN_F4 0x1d5
#define KEY_FN_F5 0x1d6
#define KEY_FN_F6 0x1d7
#define KEY_FN_F7 0x1d8
#define KEY_FN_F8 0x1d9
#define KEY_FN_F9 0x1da
#define KEY_FN_F10 0x1db
#define KEY_FN_F11 0x1dc
#define KEY_FN_F12 0x1dd
#define KEY_FN_1 0x1de
#define KEY_FN_2 0x1df
#define KEY_FN_D 0x1e0
#define KEY_FN_E 0x1e1
#define KEY_FN_F 0x1e2
#define KEY_FN_S 0x1e3
#define KEY_FN_B 0x1e4
#define KEY_BRL_DOT1 0x1f1
#define KEY_BRL_DOT2 0x1f2
#define KEY_BRL_DOT3 0x1f3
#define KEY_BRL_DOT4 0x1f4
#define KEY_BRL_DOT5 0x1f5
#define KEY_BRL_DOT6 0x1f6
#define KEY_BRL_DOT7 0x1f7
#define KEY_BRL_DOT8 0x1f8
#define KEY_BRL_DOT9 0x1f9
#define KEY_BRL_DOT10 0x1fa
#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
#define KEY_NUMERIC_1 0x201 /* and other keypads */
#define KEY_NUMERIC_2 0x202
#define KEY_NUMERIC_3 0x203
#define KEY_NUMERIC_4 0x204
#define KEY_NUMERIC_5 0x205
#define KEY_NUMERIC_6 0x206
#define KEY_NUMERIC_7 0x207
#define KEY_NUMERIC_8 0x208
#define KEY_NUMERIC_9 0x209
#define KEY_NUMERIC_STAR 0x20a
#define KEY_NUMERIC_POUND 0x20b
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
#define KEY_TOUCHPAD_ON 0x213
#define KEY_TOUCHPAD_OFF 0x214
#define KEY_CAMERA_ZOOMIN 0x215
#define KEY_CAMERA_ZOOMOUT 0x216
#define KEY_CAMERA_UP 0x217
#define KEY_CAMERA_DOWN 0x218
#define KEY_CAMERA_LEFT 0x219
#define KEY_CAMERA_RIGHT 0x21a
#define KEY_ATTENDANT_ON 0x21b
#define KEY_ATTENDANT_OFF 0x21c
#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
#define BTN_DPAD_UP 0x220
#define BTN_DPAD_DOWN 0x221
#define BTN_DPAD_LEFT 0x222
#define BTN_DPAD_RIGHT 0x223
#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
#define BTN_TRIGGER_HAPPY3 0x2c2
#define BTN_TRIGGER_HAPPY4 0x2c3
#define BTN_TRIGGER_HAPPY5 0x2c4
#define BTN_TRIGGER_HAPPY6 0x2c5
#define BTN_TRIGGER_HAPPY7 0x2c6
#define BTN_TRIGGER_HAPPY8 0x2c7
#define BTN_TRIGGER_HAPPY9 0x2c8
#define BTN_TRIGGER_HAPPY10 0x2c9
#define BTN_TRIGGER_HAPPY11 0x2ca
#define BTN_TRIGGER_HAPPY12 0x2cb
#define BTN_TRIGGER_HAPPY13 0x2cc
#define BTN_TRIGGER_HAPPY14 0x2cd
#define BTN_TRIGGER_HAPPY15 0x2ce
#define BTN_TRIGGER_HAPPY16 0x2cf
#define BTN_TRIGGER_HAPPY17 0x2d0
#define BTN_TRIGGER_HAPPY18 0x2d1
#define BTN_TRIGGER_HAPPY19 0x2d2
#define BTN_TRIGGER_HAPPY20 0x2d3
#define BTN_TRIGGER_HAPPY21 0x2d4
#define BTN_TRIGGER_HAPPY22 0x2d5
#define BTN_TRIGGER_HAPPY23 0x2d6
#define BTN_TRIGGER_HAPPY24 0x2d7
#define BTN_TRIGGER_HAPPY25 0x2d8
#define BTN_TRIGGER_HAPPY26 0x2d9
#define BTN_TRIGGER_HAPPY27 0x2da
#define BTN_TRIGGER_HAPPY28 0x2db
#define BTN_TRIGGER_HAPPY29 0x2dc
#define BTN_TRIGGER_HAPPY30 0x2dd
#define BTN_TRIGGER_HAPPY31 0x2de
#define BTN_TRIGGER_HAPPY32 0x2df
#define BTN_TRIGGER_HAPPY33 0x2e0
#define BTN_TRIGGER_HAPPY34 0x2e1
#define BTN_TRIGGER_HAPPY35 0x2e2
#define BTN_TRIGGER_HAPPY36 0x2e3
#define BTN_TRIGGER_HAPPY37 0x2e4
#define BTN_TRIGGER_HAPPY38 0x2e5
#define BTN_TRIGGER_HAPPY39 0x2e6
#define BTN_TRIGGER_HAPPY40 0x2e7
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x2ff
#define KEY_CNT (KEY_MAX+1)
/*
* Relative axes
*/
#define REL_X 0x00
#define REL_Y 0x01
#define REL_Z 0x02
#define REL_RX 0x03
#define REL_RY 0x04
#define REL_RZ 0x05
#define REL_HWHEEL 0x06
#define REL_DIAL 0x07
#define REL_WHEEL 0x08
#define REL_MISC 0x09
#define REL_MAX 0x0f
#define REL_CNT (REL_MAX+1)
/*
* Absolute axes
*/
#define ABS_X 0x00
#define ABS_Y 0x01
#define ABS_Z 0x02
#define ABS_RX 0x03
#define ABS_RY 0x04
#define ABS_RZ 0x05
#define ABS_THROTTLE 0x06
#define ABS_RUDDER 0x07
#define ABS_WHEEL 0x08
#define ABS_GAS 0x09
#define ABS_BRAKE 0x0a
#define ABS_HAT0X 0x10
#define ABS_HAT0Y 0x11
#define ABS_HAT1X 0x12
#define ABS_HAT1Y 0x13
#define ABS_HAT2X 0x14
#define ABS_HAT2Y 0x15
#define ABS_HAT3X 0x16
#define ABS_HAT3Y 0x17
#define ABS_PRESSURE 0x18
#define ABS_DISTANCE 0x19
#define ABS_TILT_X 0x1a
#define ABS_TILT_Y 0x1b
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
#define ABS_MT_SLOT 0x2f /* MT slot being modified */
#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
/*
* Switch events
*/
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
set = radio enabled */
#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
#define SW_DOCK 0x05 /* set = plugged into dock */
#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
/*
* Misc events
*/
#define MSC_SERIAL 0x00
#define MSC_PULSELED 0x01
#define MSC_GESTURE 0x02
#define MSC_RAW 0x03
#define MSC_SCAN 0x04
#define MSC_TIMESTAMP 0x05
#define MSC_MAX 0x07
#define MSC_CNT (MSC_MAX+1)
/*
* LEDs
*/
#define LED_NUML 0x00
#define LED_CAPSL 0x01
#define LED_SCROLLL 0x02
#define LED_COMPOSE 0x03
#define LED_KANA 0x04
#define LED_SLEEP 0x05
#define LED_SUSPEND 0x06
#define LED_MUTE 0x07
#define LED_MISC 0x08
#define LED_MAIL 0x09
#define LED_CHARGING 0x0a
#define LED_MAX 0x0f
#define LED_CNT (LED_MAX+1)
/*
* Autorepeat values
*/
#define REP_DELAY 0x00
#define REP_PERIOD 0x01
#define REP_MAX 0x01
#define REP_CNT (REP_MAX+1)
/*
* Sounds
*/
#define SND_CLICK 0x00
#define SND_BELL 0x01
#define SND_TONE 0x02
#define SND_MAX 0x07
#define SND_CNT (SND_MAX+1)
/*
* IDs.
*/
#define ID_BUS 0
#define ID_VENDOR 1
#define ID_PRODUCT 2
#define ID_VERSION 3
#define BUS_PCI 0x01
#define BUS_ISAPNP 0x02
#define BUS_USB 0x03
#define BUS_HIL 0x04
#define BUS_BLUETOOTH 0x05
#define BUS_VIRTUAL 0x06
#define BUS_ISA 0x10
#define BUS_I8042 0x11
#define BUS_XTKBD 0x12
#define BUS_RS232 0x13
#define BUS_GAMEPORT 0x14
#define BUS_PARPORT 0x15
#define BUS_AMIGA 0x16
#define BUS_ADB 0x17
#define BUS_I2C 0x18
#define BUS_HOST 0x19
#define BUS_GSC 0x1A
#define BUS_ATARI 0x1B
#define BUS_SPI 0x1C
/*
* MT_TOOL types
*/
#define MT_TOOL_FINGER 0
#define MT_TOOL_PEN 1
#define MT_TOOL_MAX 1
/*
* Values describing the status of a force-feedback effect
*/
#define FF_STATUS_STOPPED 0x00
#define FF_STATUS_PLAYING 0x01
#define FF_STATUS_MAX 0x01
3. Android 键值表
Android 键值表在源码的路径：framework/base/core/android/view/input/KeyEvent.java
public class KeyEvent extends InputEvent implements Parcelable {
/** Key code constant: Unknown key code. /
public static final int KEYCODE_UNKNOWN = 0;
/* Key code constant: Soft Left key.
* Usually situated below the display on phones and used as a multi-function
* feature key for selecting a software defined function shown on the bottom left
* of the display. /
public static final int KEYCODE_SOFT_LEFT = 1;
/* Key code constant: Soft Right key.
* Usually situated below the display on phones and used as a multi-function
* feature key for selecting a software defined function shown on the bottom right
* of the display. /
public static final int KEYCODE_SOFT_RIGHT = 2;
/* Key code constant: Home key.
* This key is handled by the framework and is never delivered to applications. /
public static final int KEYCODE_HOME = 3;
/* Key code constant: Back key. /
public static final int KEYCODE_BACK = 4;
/* Key code constant: Call key. /
public static final int KEYCODE_CALL = 5;
/* Key code constant: End Call key. /
public static final int KEYCODE_ENDCALL = 6;
/* Key code constant: ‘0’ key. /
public static final int KEYCODE_0 = 7;
/* Key code constant: ‘1’ key. /
public static final int KEYCODE_1 = 8;
/* Key code constant: ‘2’ key. /
public static final int KEYCODE_2 = 9;
/* Key code constant: ‘3’ key. /
public static final int KEYCODE_3 = 10;
/* Key code constant: ‘4’ key. /
public static final int KEYCODE_4 = 11;
/* Key code constant: ‘5’ key. /
public static final int KEYCODE_5 = 12;
/* Key code constant: ‘6’ key. /
public static final int KEYCODE_6 = 13;
/* Key code constant: ‘7’ key. /
public static final int KEYCODE_7 = 14;
/* Key code constant: ‘8’ key. /
public static final int KEYCODE_8 = 15;
/* Key code constant: ‘9’ key. /
public static final int KEYCODE_9 = 16;
/* Key code constant: ‘’ key. /
public static final int KEYCODE_STAR = 17;
/* Key code constant: ‘#’ key. /
public static final int KEYCODE_POUND = 18;
/* Key code constant: Directional Pad Up key.
* May also be synthesized from trackball motions. /
public static final int KEYCODE_DPAD_UP = 19;
/* Key code constant: Directional Pad Down key.
* May also be synthesized from trackball motions. /
public static final int KEYCODE_DPAD_DOWN = 20;
/* Key code constant: Directional Pad Left key.
* May also be synthesized from trackball motions. /
public static final int KEYCODE_DPAD_LEFT = 21;
/* Key code constant: Directional Pad Right key.
* May also be synthesized from trackball motions. /
public static final int KEYCODE_DPAD_RIGHT = 22;
/* Key code constant: Directional Pad Center key.
* May also be synthesized from trackball motions. /
public static final int KEYCODE_DPAD_CENTER = 23;
/* Key code constant: Volume Up key.
* Adjusts the speaker volume up. /
public static final int KEYCODE_VOLUME_UP = 24;
/* Key code constant: Volume Down key.
* Adjusts the speaker volume down. /
public static final int KEYCODE_VOLUME_DOWN = 25;
/* Key code constant: Power key. /
public static final int KEYCODE_POWER = 26;
/* Key code constant: Camera key.
* Used to launch a camera application or take pictures. /
public static final int KEYCODE_CAMERA = 27;
/* Key code constant: Clear key. /
public static final int KEYCODE_CLEAR = 28;
/* Key code constant: ‘A’ key. /
public static final int KEYCODE_A = 29;
/* Key code constant: ‘B’ key. /
public static final int KEYCODE_B = 30;
/* Key code constant: ‘C’ key. /
public static final int KEYCODE_C = 31;
/* Key code constant: ‘D’ key. /
public static final int KEYCODE_D = 32;
/* Key code constant: ‘E’ key. /
public static final int KEYCODE_E = 33;
/* Key code constant: ‘F’ key. /
public static final int KEYCODE_F = 34;
/* Key code constant: ‘G’ key. /
public static final int KEYCODE_G = 35;
/* Key code constant: ‘H’ key. /
public static final int KEYCODE_H = 36;
/* Key code constant: ‘I’ key. /
public static final int KEYCODE_I = 37;
/* Key code constant: ‘J’ key. /
public static final int KEYCODE_J = 38;
/* Key code constant: ‘K’ key. /
public static final int KEYCODE_K = 39;
/* Key code constant: ‘L’ key. /
public static final int KEYCODE_L = 40;
/* Key code constant: ‘M’ key. /
public static final int KEYCODE_M = 41;
/* Key code constant: ‘N’ key. /
public static final int KEYCODE_N = 42;
/* Key code constant: ‘O’ key. /
public static final int KEYCODE_O = 43;
/* Key code constant: ‘P’ key. /
public static final int KEYCODE_P = 44;
/* Key code constant: ‘Q’ key. /
public static final int KEYCODE_Q = 45;
/* Key code constant: ‘R’ key. /
public static final int KEYCODE_R = 46;
/* Key code constant: ‘S’ key. /
public static final int KEYCODE_S = 47;
/* Key code constant: ‘T’ key. /
public static final int KEYCODE_T = 48;
/* Key code constant: ‘U’ key. /
public static final int KEYCODE_U = 49;
/* Key code constant: ‘V’ key. /
public static final int KEYCODE_V = 50;
/* Key code constant: ‘W’ key. /
public static final int KEYCODE_W = 51;
/* Key code constant: ‘X’ key. /
public static final int KEYCODE_X = 52;
/* Key code constant: ‘Y’ key. /
public static final int KEYCODE_Y = 53;
/* Key code constant: ‘Z’ key. /
public static final int KEYCODE_Z = 54;
/* Key code constant: ‘,’ key. /
public static final int KEYCODE_COMMA = 55;
/* Key code constant: ‘.’ key. /
public static final int KEYCODE_PERIOD = 56;
/* Key code constant: Left Alt modifier key. /
public static final int KEYCODE_ALT_LEFT = 57;
/* Key code constant: Right Alt modifier key. /
public static final int KEYCODE_ALT_RIGHT = 58;
/* Key code constant: Left Shift modifier key. /
public static final int KEYCODE_SHIFT_LEFT = 59;
/* Key code constant: Right Shift modifier key. /
public static final int KEYCODE_SHIFT_RIGHT = 60;
/* Key code constant: Tab key. /
public static final int KEYCODE_TAB = 61;
/* Key code constant: Space key. /
public static final int KEYCODE_SPACE = 62;
/* Key code constant: Symbol modifier key.
* Used to enter alternate symbols. /
public static final int KEYCODE_SYM = 63;
/* Key code constant: Explorer special function key.
* Used to launch a browser application. /
public static final int KEYCODE_EXPLORER = 64;
/* Key code constant: Envelope special function key.
* Used to launch a mail application. /
public static final int KEYCODE_ENVELOPE = 65;
/* Key code constant: Enter key. /
public static final int KEYCODE_ENTER = 66;
/* Key code constant: Backspace key.
* Deletes characters before the insertion point, unlike {@link #KEYCODE_FORWARD_DEL}. /
public static final int KEYCODE_DEL = 67;
/* Key code constant: ‘`’ (backtick) key. /
public static final int KEYCODE_GRAVE = 68;
/* Key code constant: ‘-’. /
public static final int KEYCODE_MINUS = 69;
/* Key code constant: ‘=’ key. /
public static final int KEYCODE_EQUALS = 70;
/* Key code constant: ‘[’ key. /
public static final int KEYCODE_LEFT_BRACKET = 71;
/* Key code constant: ‘]’ key. /
public static final int KEYCODE_RIGHT_BRACKET = 72;
/* Key code constant: ‘’ key. /
public static final int KEYCODE_BACKSLASH = 73;
/* Key code constant: ‘;’ key. /
public static final int KEYCODE_SEMICOLON = 74;
/* Key code constant: ‘’’ (apostrophe) key. /
public static final int KEYCODE_APOSTROPHE = 75;
/* Key code constant: ‘/’ key. /
public static final int KEYCODE_SLASH = 76;
/* Key code constant: ‘@’ key. /
public static final int KEYCODE_AT = 77;
/* Key code constant: Number modifier key.
* Used to enter numeric symbols.
* This key is not Num Lock; it is more like {@link #KEYCODE_ALT_LEFT} and is
* interpreted as an ALT key by {@link android.text.method.MetaKeyKeyListener}. /
public static final int KEYCODE_NUM = 78;
/* Key code constant: Headset Hook key.
* Used to hang up calls and stop media. /
public static final int KEYCODE_HEADSETHOOK = 79;
/* Key code constant: Camera Focus key.
* Used to focus the camera. /
public static final int KEYCODE_FOCUS = 80; // Camera focus
/* Key code constant: ‘+’ key. /
public static final int KEYCODE_PLUS = 81;
/* Key code constant: Menu key. /
public static final int KEYCODE_MENU = 82;
/* Key code constant: Notification key. /
public static final int KEYCODE_NOTIFICATION = 83;
/* Key code constant: Search key. /
public static final int KEYCODE_SEARCH = 84;
/* Key code constant: Play/Pause media key. /
public static final int KEYCODE_MEDIA_PLAY_PAUSE= 85;
/* Key code constant: Stop media key. /
public static final int KEYCODE_MEDIA_STOP = 86;
/* Key code constant: Play Next media key. /
public static final int KEYCODE_MEDIA_NEXT = 87;
/* Key code constant: Play Previous media key. /
public static final int KEYCODE_MEDIA_PREVIOUS = 88;
/* Key code constant: Rewind media key. /
public static final int KEYCODE_MEDIA_REWIND = 89;
/* Key code constant: Fast Forward media key. /
public static final int KEYCODE_MEDIA_FAST_FORWARD = 90;
/* Key code constant: Mute key.
* Mutes the microphone, unlike {@link #KEYCODE_VOLUME_MUTE}. /
public static final int KEYCODE_MUTE = 91;
/* Key code constant: Page Up key. /
public static final int KEYCODE_PAGE_UP = 92;
/* Key code constant: Page Down key. /
public static final int KEYCODE_PAGE_DOWN = 93;
/* Key code constant: Picture Symbols modifier key.
* Used to switch symbol sets (Emoji, Kao-moji). /
public static final int KEYCODE_PICTSYMBOLS = 94; // switch symbol-sets (Emoji,Kao-moji)
/* Key code constant: Switch Charset modifier key.
* Used to switch character sets (Kanji, Katakana). /
public static final int KEYCODE_SWITCH_CHARSET = 95; // switch char-sets (Kanji,Katakana)
/* Key code constant: A Button key.
* On a game controller, the A button should be either the button labeled A
* or the first button on the bottom row of controller buttons. /
public static final int KEYCODE_BUTTON_A = 96;
/* Key code constant: B Button key.
* On a game controller, the B button should be either the button labeled B
* or the second button on the bottom row of controller buttons. /
public static final int KEYCODE_BUTTON_B = 97;
/* Key code constant: C Button key.
* On a game controller, the C button should be either the button labeled C
* or the third button on the bottom row of controller buttons. /
public static final int KEYCODE_BUTTON_C = 98;
/* Key code constant: X Button key.
* On a game controller, the X button should be either the button labeled X
* or the first button on the upper row of controller buttons. /
public static final int KEYCODE_BUTTON_X = 99;
/* Key code constant: Y Button key.
* On a game controller, the Y button should be either the button labeled Y
* or the second button on the upper row of controller buttons. /
public static final int KEYCODE_BUTTON_Y = 100;
/* Key code constant: Z Button key.
* On a game controller, the Z button should be either the button labeled Z
* or the third button on the upper row of controller buttons. /
public static final int KEYCODE_BUTTON_Z = 101;
/* Key code constant: L1 Button key.
* On a game controller, the L1 button should be either the button labeled L1 (or L)
* or the top left trigger button. /
public static final int KEYCODE_BUTTON_L1 = 102;
/* Key code constant: R1 Button key.
* On a game controller, the R1 button should be either the button labeled R1 (or R)
* or the top right trigger button. /
public static final int KEYCODE_BUTTON_R1 = 103;
/* Key code constant: L2 Button key.
* On a game controller, the L2 button should be either the button labeled L2
* or the bottom left trigger button. /
public static final int KEYCODE_BUTTON_L2 = 104;
/* Key code constant: R2 Button key.
* On a game controller, the R2 button should be either the button labeled R2
* or the bottom right trigger button. /
public static final int KEYCODE_BUTTON_R2 = 105;
/* Key code constant: Left Thumb Button key.
* On a game controller, the left thumb button indicates that the left (or only)
* joystick is pressed. /
public static final int KEYCODE_BUTTON_THUMBL = 106;
/* Key code constant: Right Thumb Button key.
* On a game controller, the right thumb button indicates that the right
* joystick is pressed. /
public static final int KEYCODE_BUTTON_THUMBR = 107;
/* Key code constant: Start Button key.
* On a game controller, the button labeled Start. /
public static final int KEYCODE_BUTTON_START = 108;
/* Key code constant: Select Button key.
* On a game controller, the button labeled Select. /
public static final int KEYCODE_BUTTON_SELECT = 109;
/* Key code constant: Mode Button key.
* On a game controller, the button labeled Mode. /
public static final int KEYCODE_BUTTON_MODE = 110;
/* Key code constant: Escape key. /
public static final int KEYCODE_ESCAPE = 111;
/* Key code constant: Forward Delete key.
* Deletes characters ahead of the insertion point, unlike {@link #KEYCODE_DEL}. /
public static final int KEYCODE_FORWARD_DEL = 112;
/* Key code constant: Left Control modifier key. /
public static final int KEYCODE_CTRL_LEFT = 113;
/* Key code constant: Right Control modifier key. /
public static final int KEYCODE_CTRL_RIGHT = 114;
/* Key code constant: Caps Lock key. /
public static final int KEYCODE_CAPS_LOCK = 115;
/* Key code constant: Scroll Lock key. /
public static final int KEYCODE_SCROLL_LOCK = 116;
/* Key code constant: Left Meta modifier key. /
public static final int KEYCODE_META_LEFT = 117;
/* Key code constant: Right Meta modifier key. /
public static final int KEYCODE_META_RIGHT = 118;
/* Key code constant: Function modifier key. /
public static final int KEYCODE_FUNCTION = 119;
/* Key code constant: System Request / Print Screen key. /
public static final int KEYCODE_SYSRQ = 120;
/* Key code constant: Break / Pause key. /
public static final int KEYCODE_BREAK = 121;
/* Key code constant: Home Movement key.
* Used for scrolling or moving the cursor around to the start of a line
* or to the top of a list. /
public static final int KEYCODE_MOVE_HOME = 122;
/* Key code constant: End Movement key.
* Used for scrolling or moving the cursor around to the end of a line
* or to the bottom of a list. /
public static final int KEYCODE_MOVE_END = 123;
/* Key code constant: Insert key.
* Toggles insert / overwrite edit mode. /
public static final int KEYCODE_INSERT = 124;
/* Key code constant: Forward key.
* Navigates forward in the history stack. Complement of {@link #KEYCODE_BACK}. /
public static final int KEYCODE_FORWARD = 125;
/* Key code constant: Play media key. /
public static final int KEYCODE_MEDIA_PLAY = 126;
/* Key code constant: Pause media key. /
public static final int KEYCODE_MEDIA_PAUSE = 127;
/* Key code constant: Close media key.
* May be used to close a CD tray, for example. /
public static final int KEYCODE_MEDIA_CLOSE = 128;
/* Key code constant: Eject media key.
* May be used to eject a CD tray, for example. /
public static final int KEYCODE_MEDIA_EJECT = 129;
/* Key code constant: Record media key. /
public static final int KEYCODE_MEDIA_RECORD = 130;
/* Key code constant: F1 key. /
public static final int KEYCODE_F1 = 131;
/* Key code constant: F2 key. /
public static final int KEYCODE_F2 = 132;
/* Key code constant: F3 key. /
public static final int KEYCODE_F3 = 133;
/* Key code constant: F4 key. /
public static final int KEYCODE_F4 = 134;
/* Key code constant: F5 key. /
public static final int KEYCODE_F5 = 135;
/* Key code constant: F6 key. /
public static final int KEYCODE_F6 = 136;
/* Key code constant: F7 key. /
public static final int KEYCODE_F7 = 137;
/* Key code constant: F8 key. /
public static final int KEYCODE_F8 = 138;
/* Key code constant: F9 key. /
public static final int KEYCODE_F9 = 139;
/* Key code constant: F10 key. /
public static final int KEYCODE_F10 = 140;
/* Key code constant: F11 key. /
public static final int KEYCODE_F11 = 141;
/* Key code constant: F12 key. /
public static final int KEYCODE_F12 = 142;
/* Key code constant: Num Lock key.
* This is the Num Lock key; it is different from {@link #KEYCODE_NUM}.
* This key alters the behavior of other keys on the numeric keypad. /
public static final int KEYCODE_NUM_LOCK = 143;
/* Key code constant: Numeric keypad ‘0’ key. /
public static final int KEYCODE_NUMPAD_0 = 144;
/* Key code constant: Numeric keypad ‘1’ key. /
public static final int KEYCODE_NUMPAD_1 = 145;
/* Key code constant: Numeric keypad ‘2’ key. /
public static final int KEYCODE_NUMPAD_2 = 146;
/* Key code constant: Numeric keypad ‘3’ key. /
public static final int KEYCODE_NUMPAD_3 = 147;
/* Key code constant: Numeric keypad ‘4’ key. /
public static final int KEYCODE_NUMPAD_4 = 148;
/* Key code constant: Numeric keypad ‘5’ key. /
public static final int KEYCODE_NUMPAD_5 = 149;
/* Key code constant: Numeric keypad ‘6’ key. /
public static final int KEYCODE_NUMPAD_6 = 150;
/* Key code constant: Numeric keypad ‘7’ key. /
public static final int KEYCODE_NUMPAD_7 = 151;
/* Key code constant: Numeric keypad ‘8’ key. /
public static final int KEYCODE_NUMPAD_8 = 152;
/* Key code constant: Numeric keypad ‘9’ key. /
public static final int KEYCODE_NUMPAD_9 = 153;
/* Key code constant: Numeric keypad ‘/’ key (for division). /
public static final int KEYCODE_NUMPAD_DIVIDE = 154;
/* Key code constant: Numeric keypad '’ key (for multiplication). /
public static final int KEYCODE_NUMPAD_MULTIPLY = 155;
/* Key code constant: Numeric keypad ‘-’ key (for subtraction). /
public static final int KEYCODE_NUMPAD_SUBTRACT = 156;
/* Key code constant: Numeric keypad ‘+’ key (for addition). /
public static final int KEYCODE_NUMPAD_ADD = 157;
/* Key code constant: Numeric keypad ‘.’ key (for decimals or digit grouping). /
public static final int KEYCODE_NUMPAD_DOT = 158;
/* Key code constant: Numeric keypad ‘,’ key (for decimals or digit grouping). /
public static final int KEYCODE_NUMPAD_COMMA = 159;
/* Key code constant: Numeric keypad Enter key. /
public static final int KEYCODE_NUMPAD_ENTER = 160;
/* Key code constant: Numeric keypad ‘=’ key. /
public static final int KEYCODE_NUMPAD_EQUALS = 161;
/* Key code constant: Numeric keypad ‘(’ key. /
public static final int KEYCODE_NUMPAD_LEFT_PAREN = 162;
/* Key code constant: Numeric keypad ‘)’ key. /
public static final int KEYCODE_NUMPAD_RIGHT_PAREN = 163;
/* Key code constant: Volume Mute key.
* Mutes the speaker, unlike {@link #KEYCODE_MUTE}.
* This key should normally be implemented as a toggle such that the first press
* mutes the speaker and the second press restores the original volume. /
public static final int KEYCODE_VOLUME_MUTE = 164;
/* Key code constant: Info key.
* Common on TV remotes to show additional information related to what is
* currently being viewed. /
public static final int KEYCODE_INFO = 165;
/* Key code constant: Channel up key.
* On TV remotes, increments the television channel. /
public static final int KEYCODE_CHANNEL_UP = 166;
/* Key code constant: Channel down key.
* On TV remotes, decrements the television channel. /
public static final int KEYCODE_CHANNEL_DOWN = 167;
/* Key code constant: Zoom in key. /
public static final int KEYCODE_ZOOM_IN = 168;
/* Key code constant: Zoom out key. /
public static final int KEYCODE_ZOOM_OUT = 169;
/* Key code constant: TV key.
* On TV remotes, switches to viewing live TV. /
public static final int KEYCODE_TV = 170;
/* Key code constant: Window key.
* On TV remotes, toggles picture-in-picture mode or other windowing functions.
* On Android Wear devices, triggers a display offset. /
public static final int KEYCODE_WINDOW = 171;
/* Key code constant: Guide key.
* On TV remotes, shows a programming guide. /
public static final int KEYCODE_GUIDE = 172;
/* Key code constant: DVR key.
* On some TV remotes, switches to a DVR mode for recorded shows. /
public static final int KEYCODE_DVR = 173;
/* Key code constant: Bookmark key.
* On some TV remotes, bookmarks content or web pages. /
public static final int KEYCODE_BOOKMARK = 174;
/* Key code constant: Toggle captions key.
* Switches the mode for closed-captioning text, for example during television shows. /
public static final int KEYCODE_CAPTIONS = 175;
/* Key code constant: Settings key.
* Starts the system settings activity. /
public static final int KEYCODE_SETTINGS = 176;
/* Key code constant: TV power key.
* On TV remotes, toggles the power on a television screen. /
public static final int KEYCODE_TV_POWER = 177;
/* Key code constant: TV input key.
* On TV remotes, switches the input on a television screen. /
public static final int KEYCODE_TV_INPUT = 178;
/* Key code constant: Set-top-box power key.
* On TV remotes, toggles the power on an external Set-top-box. /
public static final int KEYCODE_STB_POWER = 179;
/* Key code constant: Set-top-box input key.
* On TV remotes, switches the input mode on an external Set-top-box. /
public static final int KEYCODE_STB_INPUT = 180;
/* Key code constant: A/V Receiver power key.
* On TV remotes, toggles the power on an external A/V Receiver. /
public static final int KEYCODE_AVR_POWER = 181;
/* Key code constant: A/V Receiver input key.
* On TV remotes, switches the input mode on an external A/V Receiver. /
public static final int KEYCODE_AVR_INPUT = 182;
/* Key code constant: Red “programmable” key.
* On TV remotes, acts as a contextual/programmable key. /
public static final int KEYCODE_PROG_RED = 183;
/* Key code constant: Green “programmable” key.
* On TV remotes, actsas a contextual/programmable key. /
public static final int KEYCODE_PROG_GREEN = 184;
/* Key code constant: Yellow “programmable” key.
* On TV remotes, acts as a contextual/programmable key. /
public static final int KEYCODE_PROG_YELLOW = 185;
/* Key code constant: Blue “programmable” key.
* On TV remotes, acts as a contextual/programmable key. /
public static final int KEYCODE_PROG_BLUE = 186;
/* Key code constant: App switch key.
* Should bring up the application switcher dialog. /
public static final int KEYCODE_APP_SWITCH = 187;
/* Key code constant: Generic Game Pad Button #1./
public static final int KEYCODE_BUTTON_1 = 188;
/** Key code constant: Generic Game Pad Button #2./
public static final int KEYCODE_BUTTON_2 = 189;
/** Key code constant: Generic Game Pad Button #3./
public static final int KEYCODE_BUTTON_3 = 190;
/** Key code constant: Generic Game Pad Button #4./
public static final int KEYCODE_BUTTON_4 = 191;
/** Key code constant: Generic Game Pad Button #5./
public static final int KEYCODE_BUTTON_5 = 192;
/** Key code constant: Generic Game Pad Button #6./
public static final int KEYCODE_BUTTON_6 = 193;
/** Key code constant: Generic Game Pad Button #7./
public static final int KEYCODE_BUTTON_7 = 194;
/** Key code constant: Generic Game Pad Button #8./
public static final int KEYCODE_BUTTON_8 = 195;
/** Key code constant: Generic Game Pad Button #9./
public static final int KEYCODE_BUTTON_9 = 196;
/** Key code constant: Generic Game Pad Button #10./
public static final int KEYCODE_BUTTON_10 = 197;
/** Key code constant: Generic Game Pad Button #11./
public static final int KEYCODE_BUTTON_11 = 198;
/** Key code constant: Generic Game Pad Button #12./
public static final int KEYCODE_BUTTON_12 = 199;
/** Key code constant: Generic Game Pad Button #13./
public static final int KEYCODE_BUTTON_13 = 200;
/** Key code constant: Generic Game Pad Button #14./
public static final int KEYCODE_BUTTON_14 = 201;
/** Key code constant: Generic Game Pad Button #15./
public static final int KEYCODE_BUTTON_15 = 202;
/** Key code constant: Generic Game Pad Button #16./
public static final int KEYCODE_BUTTON_16 = 203;
/** Key code constant: Language Switch key.
* Toggles the current input language such as switching between English and Japanese on
* a QWERTY keyboard. On some devices, the same function may be performed by
* pressing Shift+Spacebar. /
public static final int KEYCODE_LANGUAGE_SWITCH = 204;
/* Key code constant: Manner Mode key.
* Toggles silent or vibrate mode on and off to make the device behave more politely
* in certain settings such as on a crowded train. On some devices, the key may only
* operate when long-pressed. /
public static final int KEYCODE_MANNER_MODE = 205;
/* Key code constant: 3D Mode key.
* Toggles the display between 2D and 3D mode. /
public static final int KEYCODE_3D_MODE = 206;
/* Key code constant: Contacts special function key.
* Used to launch an address book application. /
public static final int KEYCODE_CONTACTS = 207;
/* Key code constant: Calendar special function key.
* Used to launch a calendar application. /
public static final int KEYCODE_CALENDAR = 208;
/* Key code constant: Music special function key.
* Used to launch a music player application. /
public static final int KEYCODE_MUSIC = 209;
/* Key code constant: Calculator special function key.
* Used to launch a calculator application. /
public static final int KEYCODE_CALCULATOR = 210;
/* Key code constant: Japanese full-width / half-width key. /
public static final int KEYCODE_ZENKAKU_HANKAKU = 211;
/* Key code constant: Japanese alphanumeric key. /
public static final int KEYCODE_EISU = 212;
/* Key code constant: Japanese non-conversion key. /
public static final int KEYCODE_MUHENKAN = 213;
/* Key code constant: Japanese conversion key. /
public static final int KEYCODE_HENKAN = 214;
/* Key code constant: Japanese katakana / hiragana key. /
public static final int KEYCODE_KATAKANA_HIRAGANA = 215;
/* Key code constant: Japanese Yen key. /
public static final int KEYCODE_YEN = 216;
/* Key code constant: Japanese Ro key. /
public static final int KEYCODE_RO = 217;
/* Key code constant: Japanese kana key. /
public static final int KEYCODE_KANA = 218;
/* Key code constant: Assist key.
* Launches the global assist activity. Not delivered to applications. /
public static final int KEYCODE_ASSIST = 219;
/* Key code constant: Brightness Down key.
* Adjusts the screen brightness down. /
public static final int KEYCODE_BRIGHTNESS_DOWN = 220;
/* Key code constant: Brightness Up key.
* Adjusts the screen brightness up. /
public static final int KEYCODE_BRIGHTNESS_UP = 221;
/* Key code constant: Audio Track key.
* Switches the audio tracks. /
public static final int KEYCODE_MEDIA_AUDIO_TRACK = 222;
/* Key code constant: Sleep key.
* Puts the device to sleep. Behaves somewhat like {@link #KEYCODE_POWER} but it
* has no effect if the device is already asleep. /
public static final int KEYCODE_SLEEP = 223;
/* Key code constant: Wakeup key.
* Wakes up the device. Behaves somewhat like {@link #KEYCODE_POWER} but it
* has no effect if the device is already awake. /
public static final int KEYCODE_WAKEUP = 224;
/* Key code constant: Pairing key.
* Initiates peripheral pairing mode. Useful for pairing remote control
* devices or game controllers, especially if no other input mode is
* available. /
public static final int KEYCODE_PAIRING = 225;
/* Key code constant: Media Top Menu key.
* Goes to the top of media menu. /
public static final int KEYCODE_MEDIA_TOP_MENU = 226;
/* Key code constant: ‘11’ key. /
public static final int KEYCODE_11 = 227;
/* Key code constant: ‘12’ key. /
public static final int KEYCODE_12 = 228;
/* Key code constant: Last Channel key.
* Goes to the last viewed channel. /
public static final int KEYCODE_LAST_CHANNEL = 229;
/* Key code constant: TV data service key.
* Displays data services like weather, sports. /
public static final int KEYCODE_TV_DATA_SERVICE = 230;
/* Key code constant: Voice Assist key.
* Launches the global voice assist activity. Not delivered to applications. /
public static final int KEYCODE_VOICE_ASSIST = 231;
/* Key code constant: Radio key.
* Toggles TV service / Radio service. /
public static final int KEYCODE_TV_RADIO_SERVICE = 232;
/* Key code constant: Teletext key.
* Displays Teletext service. /
public static final int KEYCODE_TV_TELETEXT = 233;
/* Key code constant: Number entry key.
* Initiates to enter multi-digit channel nubmber when each digit key is assigned
* for selecting separate channel. Corresponds to Number Entry Mode (0x1D) of CEC
* User Control Code. /
public static final int KEYCODE_TV_NUMBER_ENTRY = 234;
/* Key code constant: Analog Terrestrial key.
* Switches to analog terrestrial broadcast service. /
public static final int KEYCODE_TV_TERRESTRIAL_ANALOG = 235;
/* Key code constant: Digital Terrestrial key.
* Switches to digital terrestrial broadcast service. /
public static final int KEYCODE_TV_TERRESTRIAL_DIGITAL = 236;
/* Key code constant: Satellite key.
* Switches to digital satellite broadcast service. /
public static final int KEYCODE_TV_SATELLITE = 237;
/* Key code constant: BS key.
* Switches to BS digital satellite broadcasting service available in Japan. /
public static final int KEYCODE_TV_SATELLITE_BS = 238;
/* Key code constant: CS key.
* Switches to CS digital satellite broadcasting service available in Japan. /
public static final int KEYCODE_TV_SATELLITE_CS = 239;
/* Key code constant: BS/CS key.
* Toggles between BS and CS digital satellite services. /
public static final int KEYCODE_TV_SATELLITE_SERVICE = 240;
/* Key code constant: Toggle Network key.
* Toggles selecting broacast services. /
public static final int KEYCODE_TV_NETWORK = 241;
/* Key code constant: Antenna/Cable key.
* Toggles broadcast input source between antenna and cable. /
public static final int KEYCODE_TV_ANTENNA_CABLE = 242;
/* Key code constant: HDMI #1 key.
* Switches to HDMI input #1. /
public static final int KEYCODE_TV_INPUT_HDMI_1 = 243;
/* Key code constant: HDMI #2 key.
* Switches to HDMI input #2. /
public static final int KEYCODE_TV_INPUT_HDMI_2 = 244;
/* Key code constant: HDMI #3 key.
* Switches to HDMI input #3. /
public static final int KEYCODE_TV_INPUT_HDMI_3 = 245;
/* Key code constant: HDMI #4 key.
* Switches to HDMI input #4. /
public static final int KEYCODE_TV_INPUT_HDMI_4 = 246;
/* Key code constant: Composite #1 key.
* Switches to composite video input #1. /
public static final int KEYCODE_TV_INPUT_COMPOSITE_1 = 247;
/* Key code constant: Composite #2 key.
* Switches to composite video input #2. /
public static final int KEYCODE_TV_INPUT_COMPOSITE_2 = 248;
/* Key code constant: Component #1 key.
* Switches to component video input #1. /
public static final int KEYCODE_TV_INPUT_COMPONENT_1 = 249;
/* Key code constant: Component #2 key.
* Switches to component video input #2. /
public static final int KEYCODE_TV_INPUT_COMPONENT_2 = 250;
/* Key code constant: VGA #1 key.
* Switches to VGA (analog RGB) input #1. /
public static final int KEYCODE_TV_INPUT_VGA_1 = 251;
/* Key code constant: Audio description key.
* Toggles audio description off / on. /
public static final int KEYCODE_TV_AUDIO_DESCRIPTION = 252;
/* Key code constant: Audio description mixing volume up key.
* Louden audio description volume as compared with normal audio volume. /
public static final int KEYCODE_TV_AUDIO_DESCRIPTION_MIX_UP = 253;
/* Key code constant: Audio description mixing volume down key.
* Lessen audio description volume as compared with normal audio volume. /
public static final int KEYCODE_TV_AUDIO_DESCRIPTION_MIX_DOWN = 254;
/* Key code constant: Zoom mode key.
* Changes Zoom mode (Normal, Full, Zoom, Wide-zoom, etc.) /
public static final int KEYCODE_TV_ZOOM_MODE = 255;
/* Key code constant: Contents menu key.
* Goes to the title list. Corresponds to Contents Menu (0x0B) of CEC User Control
* Code /
public static final int KEYCODE_TV_CONTENTS_MENU = 256;
/* Key code constant: Media context menu key.
* Goes to the context menu of media contents. Corresponds to Media Context-sensitive
* Menu (0x11) of CEC User Control Code. /
public static final int KEYCODE_TV_MEDIA_CONTEXT_MENU = 257;
/* Key code constant: Timer programming key.
* Goes to the timer recording menu. Corresponds to Timer Programming (0x54) of
* CEC User Control Code. /
public static final int KEYCODE_TV_TIMER_PROGRAMMING = 258;
/* Key code constant: Help key. /
public static final int KEYCODE_HELP = 259;
/* Key code constant: Navigate to previous key.
* Goes backward by one item in an ordered collection of items. /
public static final int KEYCODE_NAVIGATE_PREVIOUS = 260;
/* Key code constant: Navigate to next key.
* Advances to the next item in an ordered collection of items. /
public static final int KEYCODE_NAVIGATE_NEXT = 261;
/* Key code constant: Navigate in key.
* Activates the item that currently has focus or expands to the next level of a navigation
* hierarchy. /
public static final int KEYCODE_NAVIGATE_IN = 262;
/* Key code constant: Navigate out key.
* Backs out one level of a navigation hierarchy or collapses the item that currently has
* focus. /
public static final int KEYCODE_NAVIGATE_OUT = 263;
/* Key code constant: Primary stem key for Wear
* Main power/reset button on watch. /
public static final int KEYCODE_STEM_PRIMARY = 264;
/* Key code constant: Generic stem key 1 for Wear /
public static final int KEYCODE_STEM_1 = 265;
/* Key code constant: Generic stem key 2 for Wear /
public static final int KEYCODE_STEM_2 = 266;
/* Key code constant: Generic stem key 3 for Wear /
public static final int KEYCODE_STEM_3 = 267;
/* Key code constant: Directional Pad Up-Left /
public static final int KEYCODE_DPAD_UP_LEFT = 268;
/* Key code constant: Directional Pad Down-Left /
public static final int KEYCODE_DPAD_DOWN_LEFT = 269;
/* Key code constant: Directional Pad Up-Right /
public static final int KEYCODE_DPAD_UP_RIGHT = 270;
/* Key code constant: Directional Pad Down-Right /
public static final int KEYCODE_DPAD_DOWN_RIGHT = 271;
/* Key code constant: Skip forward media key. /
public static final int KEYCODE_MEDIA_SKIP_FORWARD = 272;
/* Key code constant: Skip backward media key. /
public static final int KEYCODE_MEDIA_SKIP_BACKWARD = 273;
/* Key code constant: Step forward media key.
* Steps media forward, one frame at a time. /
public static final int KEYCODE_MEDIA_STEP_FORWARD = 274;
/* Key code constant: Step backward media key.
* Steps media backward, one frame at a time. /
public static final int KEYCODE_MEDIA_STEP_BACKWARD = 275;
/* Key code constant: put device to sleep unless a wakelock is held. /
public static final int KEYCODE_SOFT_SLEEP = 276;
/* Key code constant: Cut key. /
public static final int KEYCODE_CUT = 277;
/* Key code constant: Copy key. /
public static final int KEYCODE_COPY = 278;
/* Key code constant: Paste key. /
public static final int KEYCODE_PASTE = 279;
/* Key code constant: Consumed by the system for navigation up /
public static final int KEYCODE_SYSTEM_NAVIGATION_UP = 280;
/* Key code constant: Consumed by the system for navigation down /
public static final int KEYCODE_SYSTEM_NAVIGATION_DOWN = 281;
/* Key code constant: Consumed by the system for navigation left*/
public static final int KEYCODE_SYSTEM_NAVIGATION_LEFT = 282;
/** Key code constant: Consumed by the system for navigation right /
public static final int KEYCODE_SYSTEM_NAVIGATION_RIGHT = 283;
/* Key code constant: Show all apps /
public static final int KEYCODE_ALL_APPS = 284;
/* Key code constant: Refresh key. /
public static final int KEYCODE_REFRESH = 285;
/* Key code constant: Thumbs up key. Apps can use this to let user upvote content. /
public static final int KEYCODE_THUMBS_UP = 286;
/* Key code constant: Thumbs down key. Apps can use this to let user downvote content. /
public static final int KEYCODE_THUMBS_DOWN = 287;
/*
* Key code constant: Used to switch current {@link android.accounts.Account} that is
* consuming content. May be consumed by system to set account globally.
*/
public static final int KEYCODE_PROFILE_SWITCH = 288;
…
}
Tips
a) "确定"键，是 KEY_REPLY。
b) /vendor/usr/keylayout 与/system/usr/keylayout 作用相同。
c) 红外注册失败，可查看PWM GPIO复用(iomux)。
d) 注册成功后仍然接收不到信号，可使用示波器或者逻辑分析仪直接抓红外接收头信号。